chiark / gitweb /
elogind.git
5 years agosystemctl: introduce -r switch to show units running in local containers in addition...
Lennart Poettering [Mon, 17 Mar 2014 02:31:38 +0000 (03:31 +0100)]
systemctl: introduce -r switch to show units running in local containers in addition to the host

5 years agotimedated: move test logging to test program
Kay Sievers [Sun, 16 Mar 2014 23:18:55 +0000 (00:18 +0100)]
timedated: move test logging to test program

5 years agotimedated: update spike handling
Kay Sievers [Sun, 16 Mar 2014 22:51:50 +0000 (23:51 +0100)]
timedated: update spike handling

5 years agotimedated: update spike handling
Kay Sievers [Sun, 16 Mar 2014 21:57:42 +0000 (22:57 +0100)]
timedated: update spike handling

5 years agotimedated: handle external system time changes
Kay Sievers [Sun, 16 Mar 2014 16:45:06 +0000 (17:45 +0100)]
timedated: handle external system time changes

5 years agoUse strlen even for constant strings
Josh Triplett [Sat, 15 Mar 2014 18:40:07 +0000 (11:40 -0700)]
Use strlen even for constant strings

GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity.  In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.

5 years agonspawn: UP the host side of the veth pair after adding it to a bridge
Tom Gundersen [Sun, 16 Mar 2014 12:55:41 +0000 (13:55 +0100)]
nspawn: UP the host side of the veth pair after adding it to a bridge

5 years agosd-rtnl: never treat broadcasts as replies
Tom Gundersen [Sun, 16 Mar 2014 12:02:16 +0000 (13:02 +0100)]
sd-rtnl: never treat broadcasts as replies

Otherwise the sequence number of a broadcast may match the sequence number of a
pending unicast message and cause confusion.

5 years agonetworkd: netdev - support joining already existing netdevs
Tom Gundersen [Sat, 15 Mar 2014 19:03:34 +0000 (20:03 +0100)]
networkd: netdev - support joining already existing netdevs

5 years agosd-rtnl: make RTM_NEWLINK report EEXIST by default
Tom Gundersen [Sat, 15 Mar 2014 19:02:24 +0000 (20:02 +0100)]
sd-rtnl: make RTM_NEWLINK report EEXIST by default

Use RTM_SETLINK to update an existing link.

5 years agotimedated: print delay and jitter in debug output
Kay Sievers [Sat, 15 Mar 2014 15:57:51 +0000 (16:57 +0100)]
timedated: print delay and jitter in debug output

5 years ago_sd_machines: Use machinectl --no-legend
Wieland Hoffmann [Mon, 10 Mar 2014 14:17:32 +0000 (15:17 +0100)]
_sd_machines: Use machinectl --no-legend

Otherwise bogus entries from the header and footer would show up in the
completion list.

5 years agozsh completion: Install _sd_machines with _machinectl
Wieland Hoffmann [Mon, 10 Mar 2014 14:17:31 +0000 (15:17 +0100)]
zsh completion: Install _sd_machines with _machinectl

_machinectl uses _sd_machines to provide a list of all available
machines.

5 years agotimedated: use builtins for integer log and exp
Zbigniew Jędrzejewski-Szmek [Sat, 15 Mar 2014 01:43:56 +0000 (21:43 -0400)]
timedated: use builtins for integer log and exp

5 years agojournald: add support for wall forwarding
Sebastian Thorarensen [Thu, 13 Mar 2014 23:38:15 +0000 (00:38 +0100)]
journald: add support for wall forwarding

This will let journald forward logs as messages sent to all logged in
users (like wall).

Two options are added:
 * ForwardToWall (default yes)
 * MaxLevelWall (default emerg)
'ForwardToWall' is overridable by kernel command line option
'systemd.journald.forward_to_wall'.

This is used to emulate the traditional syslogd behaviour of sending
emergency messages to all logged in users.

5 years agoutmp-wtmp: allow overriding username on wall
Sebastian Thorarensen [Thu, 13 Mar 2014 23:38:05 +0000 (00:38 +0100)]
utmp-wtmp: allow overriding username on wall

utmp_wall() now takes an optional argument 'username_override' which
allows the caller to override the username shown on wall messages.
journald will use this to inform users that its wall messages comes from
'systemd-journald'.

5 years agosd-bus: don't choke if somebody sends us a message with a unix fd count of 0
Lennart Poettering [Fri, 14 Mar 2014 20:15:32 +0000 (21:15 +0100)]
sd-bus: don't choke if somebody sends us a message with a unix fd count of 0

It's kinda pointless to include a unix fd header field in messages if it
carries the value 0, but let's do this anyway...

5 years agosd-bus: don't access invalid memory if a signal matcher was freed from its own callback
Lennart Poettering [Fri, 14 Mar 2014 20:12:36 +0000 (21:12 +0100)]
sd-bus: don't access invalid memory if a signal matcher was freed from its own callback

5 years agoutil: add hexdump() call to create pretty hexdumps of data
Lennart Poettering [Fri, 14 Mar 2014 20:11:31 +0000 (21:11 +0100)]
util: add hexdump() call to create pretty hexdumps of data

This is very useful when debugging sd-bus to look at messages.

5 years agoupdate TODO
Lennart Poettering [Fri, 14 Mar 2014 20:10:55 +0000 (21:10 +0100)]
update TODO

5 years agonetworkd: fix typo
Michael Olbrich [Fri, 14 Mar 2014 17:19:29 +0000 (18:19 +0100)]
networkd: fix typo

It's HAVE_SPLIT_USR not HAVE_SPLIT_USER

5 years agogpt: introduce root partition type GUIDs for ARM 32bit + ARM 64bit
Lennart Poettering [Fri, 14 Mar 2014 14:12:05 +0000 (15:12 +0100)]
gpt: introduce root partition type GUIDs for ARM 32bit + ARM 64bit

5 years agotmpfiles: add --root option to operate on an alternate fs tree
Michael Marineau [Fri, 14 Mar 2014 04:32:13 +0000 (21:32 -0700)]
tmpfiles: add --root option to operate on an alternate fs tree

This makes it possible to initialize or cleanup an arbitrary filesystem
hierarchy in the same way that it would be during system boot.

5 years agoshared: add root argument to search_and_fopen
Michael Marineau [Fri, 14 Mar 2014 04:32:12 +0000 (21:32 -0700)]
shared: add root argument to search_and_fopen

This adds the same root argument to search_and_fopen that
conf_files_list already has. Tools that use those two functions as a
pair can now be easily modified to load configuration files from an
alternate root filesystem tree.

5 years agoDo not return -1 (EINVAL) on allocation error
Zbigniew Jędrzejewski-Szmek [Fri, 14 Mar 2014 13:05:56 +0000 (09:05 -0400)]
Do not return -1 (EINVAL) on allocation error

5 years agomachine-id-setup: use path_kill_slashes and modernizations
Zbigniew Jędrzejewski-Szmek [Fri, 14 Mar 2014 12:43:21 +0000 (08:43 -0400)]
machine-id-setup: use path_kill_slashes and modernizations

5 years agoman: network - clarify which options may be specified more than once.
Tom Gundersen [Fri, 14 Mar 2014 12:04:57 +0000 (13:04 +0100)]
man: network - clarify which options may be specified more than once.

5 years agomachine-id: add --root option to operate on an alternate fs tree
Greg KH [Fri, 14 Mar 2014 04:43:04 +0000 (04:43 +0000)]
machine-id: add --root option to operate on an alternate fs tree

This makes it possible to initialize the /etc/machine-id file on an
arbitrary filesystem hierarchy.  This helps systems that wish to run
this at image creation time in a subdirectory, or from initramfs before
pivot-root is called.

[tomegun: converted to using _cleanup_free_ macros]

5 years agonetworkd: allow more than one static DNS server
Tom Gundersen [Thu, 13 Mar 2014 19:46:45 +0000 (20:46 +0100)]
networkd: allow more than one static DNS server

5 years agonetworkd: fix creation of runtime dirs at startup
Tom Gundersen [Thu, 13 Mar 2014 18:02:28 +0000 (19:02 +0100)]
networkd: fix creation of runtime dirs at startup

This allows us to drop the repeated attempted creations of the runtime dirs during runtime.

5 years agonetworkd: lease - store (up to) one dhcp lease file per interface
Tom Gundersen [Thu, 13 Mar 2014 17:42:56 +0000 (18:42 +0100)]
networkd: lease - store (up to) one dhcp lease file per interface

This removes an accidentally left-over test fragment.

5 years agonspawn: remove unused variable
Dave Reisner [Fri, 14 Mar 2014 01:56:07 +0000 (21:56 -0400)]
nspawn: remove unused variable

5 years agonspawn: allow -EEXIST on mkdir_safe /home/${uid}
Brandon Philips [Thu, 13 Mar 2014 22:19:40 +0000 (15:19 -0700)]
nspawn: allow -EEXIST on mkdir_safe /home/${uid}

With systemd 211 nspawn attempts to create the home directory for the
given uid. However, if the home directory already exists then it will
fail. Don't error out on -EEXIST.

5 years agoupdate TODO
Lennart Poettering [Fri, 14 Mar 2014 00:49:32 +0000 (01:49 +0100)]
update TODO

5 years agologind: automatically remove SysV + POSIX IPC objects when the users owning them...
Lennart Poettering [Fri, 14 Mar 2014 00:38:19 +0000 (01:38 +0100)]
logind: automatically remove SysV + POSIX IPC objects when the users owning them fully log out

5 years agotimedated: add SNTP client/query hookup (unused for now)
Kay Sievers [Mon, 10 Mar 2014 21:15:56 +0000 (22:15 +0100)]
timedated: add SNTP client/query hookup (unused for now)

5 years agosd-bus: don't look for a 64bit value when we only have 32bit value on reply cookie...
Lennart Poettering [Thu, 13 Mar 2014 19:33:22 +0000 (20:33 +0100)]
sd-bus: don't look for a 64bit value when we only have 32bit value on reply cookie hash table access

This broke hashtable lookups for the message cookies on s390x, which is
a 64bit BE machine where accessing 32bit values as 64bit and vice versa
will explode.

Also, while we are at it, be a bit more careful when dealing with the
64bit cookies we expose and the 32bit serial numbers dbus uses in its
payload.

Problem identified by Fridrich Strba.

5 years agobus: fix memory leak when kdbus is not enabled
Lennart Poettering [Thu, 13 Mar 2014 19:00:50 +0000 (20:00 +0100)]
bus: fix memory leak when kdbus is not enabled

5 years agonspawn: make host0's MAC address persistent
Tom Gundersen [Thu, 13 Mar 2014 16:47:30 +0000 (17:47 +0100)]
nspawn: make host0's MAC address persistent

We still need to make sure that no two MAC addresses are the same, so we use
a logic similar to what is used in udev to generate MAC addresses, and base
it on a hash of the host's machine ID and thecontainer's name.

5 years agogetty: Start getty on 3270 terminals available on Linux on System z
Hendrik Brueckner [Tue, 11 Mar 2014 17:41:09 +0000 (18:41 +0100)]
getty: Start getty on 3270 terminals available on Linux on System z

Add the first 3270 terminal device that is associated with the Linux preferred
console to the list of virtualization consoles.  This is required to
automatically start a getty if the conmode=3270 kernel parameter is specified
for Linux on z/VM instances.  Note that a queued upstream patch also enable
the 3270 terminal device if it is associated with the Linux preferred console.
How

To successfully start agetty on a 3270 terminal, a change in the agetty
parameter order is required.  Previously, agetty would started like this:

    /sbin/agetty --keep-baud 3270/tty1 115200,38400,9600 TERM

The agetty program interprets the "3270/tty1" as baud rate and fails to start
with the "bad speed: 3270/tty1" error message.  Fixing this in agetty is more
complex rather than reordering the command line parameters like this:

    /sbin/agetty --keep-baud 115200,38400,9600 3270/tty1 TERM

According to agetty sources and "agetty --help", agetty accepts the "tty",
"baudrate tty", and "tty baudrate" specifications.

P.S. The "tty: Set correct tty name in 'active' sysfs attribute" introduces
     a change to display the terminal device which is associated with the
     Linux preferred console.  This change helps to let systemd handle this
     particular case only.  Without the changes of this commit, no additional
     3270 terminal device can be managed by systemd.

     https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git/commit/?id=723abd87f6e536f1353c8f64f621520bc29523a3

5 years agosystemctl: autopage always if systemctl status is invoked without args
Lennart Poettering [Thu, 13 Mar 2014 02:58:56 +0000 (03:58 +0100)]
systemctl: autopage always if systemctl status is invoked without args

5 years agosystemctl: suppress duplicate newline if there's not log output in "systemctl status"
Lennart Poettering [Thu, 13 Mar 2014 02:58:03 +0000 (03:58 +0100)]
systemctl: suppress duplicate newline if there's not log output in "systemctl status"

5 years agosystemctl: reorder verbs
Lennart Poettering [Thu, 13 Mar 2014 02:44:32 +0000 (03:44 +0100)]
systemctl: reorder verbs

5 years agosystemctl: make sure status -a doesn't terminate too soon
Lennart Poettering [Thu, 13 Mar 2014 02:44:21 +0000 (03:44 +0100)]
systemctl: make sure status -a doesn't terminate too soon

5 years agosystemctl: show a colored red dot in "status" output indicating the state of a unit
Lennart Poettering [Thu, 13 Mar 2014 02:43:36 +0000 (03:43 +0100)]
systemctl: show a colored red dot in "status" output indicating the state of a unit

5 years agobuild-sys: make sure we rebuild manpages when doing releases
Zbigniew Jędrzejewski-Szmek [Thu, 13 Mar 2014 01:39:31 +0000 (21:39 -0400)]
build-sys: make sure we rebuild manpages when doing releases

https://bugs.freedesktop.org/show_bug.cgi?id=76056

5 years agoupdate TODO
Lennart Poettering [Thu, 13 Mar 2014 00:39:09 +0000 (01:39 +0100)]
update TODO

5 years agonspawn: honour GPT partition flags when mounting file systems following the discovera...
Lennart Poettering [Thu, 13 Mar 2014 00:33:33 +0000 (01:33 +0100)]
nspawn: honour GPT partition flags when mounting file systems following the discoverable partitions spec

5 years agogpt-auto-generator: there's no point in looking for a superblock on raw disk, we...
Lennart Poettering [Thu, 13 Mar 2014 00:06:41 +0000 (01:06 +0100)]
gpt-auto-generator: there's no point in looking for a superblock on raw disk, we only care for a partition table

5 years agogpt-auto-generator: print debug messages when we ignore a block device
Lennart Poettering [Thu, 13 Mar 2014 00:06:19 +0000 (01:06 +0100)]
gpt-auto-generator: print debug messages when we ignore a block device

5 years agogpt-auto-generator: honour read-only and no-auto flag from GPT data
Lennart Poettering [Thu, 13 Mar 2014 00:01:56 +0000 (01:01 +0100)]
gpt-auto-generator: honour read-only and no-auto flag from GPT data

Similar to the read-only and no-automount flags of Microsoft Basic Data
Partitions, introduce our own flags. We map them to the same flag bits
as Microsoft's, to keep things simple.

5 years agocryptsetup: call static variables parsed from command line arg_XYZ like in all other...
Lennart Poettering [Wed, 12 Mar 2014 23:46:58 +0000 (00:46 +0100)]
cryptsetup: call static variables parsed from command line arg_XYZ like in all other tools

5 years agogpt-auto-generator: don't return OOM on parentless devices
Tomasz Torcz [Wed, 12 Mar 2014 18:25:11 +0000 (19:25 +0100)]
gpt-auto-generator: don't return OOM on parentless devices

5 years agosocket.c: make use of union sockaddr_union
Daniel Buch [Wed, 12 Mar 2014 19:09:25 +0000 (20:09 +0100)]
socket.c: make use of union sockaddr_union

5 years agosystemctl: when "systemctl status" is called without arguments show a short overall...
Lennart Poettering [Wed, 12 Mar 2014 22:33:46 +0000 (23:33 +0100)]
systemctl: when "systemctl status" is called without arguments show a short overall system state

Previously "systemctl status" without argument would print the status of
all loaded units. This has now been moved to "systemctl status -a".

5 years agomanager: use system state enum where appropriate
Lennart Poettering [Wed, 12 Mar 2014 21:27:13 +0000 (22:27 +0100)]
manager: use system state enum where appropriate

5 years agomacro: make sure we can use IN_SET() also with complex function calls as first argument
Lennart Poettering [Wed, 12 Mar 2014 21:26:22 +0000 (22:26 +0100)]
macro: make sure we can use IN_SET() also with complex function calls as first argument

5 years agosystemctl: add new "list-machines" command
Lennart Poettering [Wed, 12 Mar 2014 20:13:58 +0000 (21:13 +0100)]
systemctl: add new "list-machines" command

"systemctl list-machines" shows one line per local container which
includes the current system state of the container, the number of failed
units as well as the number of currently queued jobs.

5 years agocore: introduce system state enum
Lennart Poettering [Wed, 12 Mar 2014 19:55:13 +0000 (20:55 +0100)]
core: introduce system state enum

The system state knows the states starting →
running/degraded/maintenance → stopping, where:

starting = system startup
running = normal operation
degraded = at least one unit is currently in failed state
maintenance = rescue/emergency mode is active or queued
stopping = system shutdown

5 years agosd-login: add sd_machine_get_class() call
Lennart Poettering [Wed, 12 Mar 2014 19:54:29 +0000 (20:54 +0100)]
sd-login: add sd_machine_get_class() call

5 years agoutil: Make in_charset a static inline in util.h
Josh Triplett [Wed, 12 Mar 2014 01:51:17 +0000 (18:51 -0700)]
util: Make in_charset a static inline in util.h

With in_charset now reduced to a one-liner (plus asserts), make it a
static inline.

5 years agoutil: Rewrite in_charset to use strspn
Josh Triplett [Tue, 11 Mar 2014 23:45:56 +0000 (16:45 -0700)]
util: Rewrite in_charset to use strspn

This simplifies in_charset down to a one-liner, and allows for possible
optimizations of strspn in libc.

5 years agobacklight: Avoid restoring brightness to an unreadably dim level
Josh Triplett [Wed, 12 Mar 2014 04:16:33 +0000 (21:16 -0700)]
backlight: Avoid restoring brightness to an unreadably dim level

Some systems turn the backlight all the way off at the lowest levels.
Clamp saved brightness to at least 1 or 5% of max_brightness.  This
avoids preserving an unreadably dim screen, which would otherwise force
the user to disable state restoration.

5 years agobacklight: Fix copy/paste error printing an unrelated error code
Josh Triplett [Wed, 12 Mar 2014 04:09:04 +0000 (21:09 -0700)]
backlight: Fix copy/paste error printing an unrelated error code

udev_device_get_sysattr_value returns NULL on failure, but doesn't
provide an error code; thus, when printing an error from it, don't print
an unrelated error code from a previous call.

5 years agoNEWS: 211 was actually released past midnight, so let's use the correct date
Lennart Poettering [Wed, 12 Mar 2014 15:39:21 +0000 (16:39 +0100)]
NEWS: 211 was actually released past midnight, so let's use the correct date

5 years agoupdate TODO
Lennart Poettering [Wed, 12 Mar 2014 15:38:49 +0000 (16:38 +0100)]
update TODO

5 years agotest-dhcp-client: remove pointless initializer, wrongly committed earlier
Kay Sievers [Wed, 12 Mar 2014 00:25:05 +0000 (01:25 +0100)]
test-dhcp-client: remove pointless initializer, wrongly committed earlier

5 years agobuild-sys: Fix move-to-rootlibdir v211
Mike Gilbert [Tue, 11 Mar 2014 22:14:18 +0000 (18:14 -0400)]
build-sys: Fix move-to-rootlibdir

Since we now use ln -s --relative, using this sed statement is redundant
and causes broken symlinks to be installed.

5 years agologind: move lid switch handling from logind-main to logind-core
Kay Sievers [Tue, 11 Mar 2014 21:38:54 +0000 (22:38 +0100)]
logind: move lid switch handling from logind-main to logind-core

../src/login/logind-dbus.c:1352: error: undefined reference to 'manager_set_lid_switch_ignore'
collect2: error: ld returned 1 exit status
make[2]: *** [test-login-tables]

5 years agobuild-sys: add libsystemd-label to network/dhcp users
Kay Sievers [Tue, 11 Mar 2014 20:46:36 +0000 (21:46 +0100)]
build-sys: add libsystemd-label to network/dhcp users

5 years agobuild-sys: we still want to rebuild the tarball though on upload
Lennart Poettering [Tue, 11 Mar 2014 19:57:17 +0000 (20:57 +0100)]
build-sys: we still want to rebuild the tarball though on upload

5 years agoNEWS: fix typo
David Herrmann [Tue, 11 Mar 2014 19:46:57 +0000 (20:46 +0100)]
NEWS: fix typo

sittings -> settings

5 years agobuild-sys: when I upload the tarball, don't run the whole distcheck thing again
Lennart Poettering [Tue, 11 Mar 2014 19:45:47 +0000 (20:45 +0100)]
build-sys: when I upload the tarball, don't run the whole distcheck thing again

I run this anyway, and given how slow it is now due to -flto, let's make
my workflow a bit faster...

5 years agoNEWS: update
Kay Sievers [Tue, 11 Mar 2014 19:41:12 +0000 (20:41 +0100)]
NEWS: update

5 years agobuild-sys: prepare release 211
Lennart Poettering [Tue, 11 Mar 2014 19:25:00 +0000 (20:25 +0100)]
build-sys: prepare release 211

5 years agoman: improve nspawn's --user= documentation
Lennart Poettering [Tue, 11 Mar 2014 19:20:54 +0000 (20:20 +0100)]
man: improve nspawn's --user= documentation

5 years agoNEWS: prepare for release 211
Lennart Poettering [Tue, 11 Mar 2014 19:18:06 +0000 (20:18 +0100)]
NEWS: prepare for release 211

5 years agoupdate TODO
Lennart Poettering [Tue, 11 Mar 2014 18:10:49 +0000 (19:10 +0100)]
update TODO

5 years agobus: replace sd_bus_label_{escape,unescape}() by new sd_bus_path_{encode,decode}()
Lennart Poettering [Tue, 11 Mar 2014 18:03:50 +0000 (19:03 +0100)]
bus: replace sd_bus_label_{escape,unescape}() by new sd_bus_path_{encode,decode}()

The new calls work similarly, but enforce a that a common, fixed bus
path prefix is used.

This follows discussions with Simon McVittie on IRC that it should be a
good idea to make sure that people don't use the escaping applied here
too wildly as anything other than the last label of a bus path.

5 years agoupdate TODO
Lennart Poettering [Tue, 11 Mar 2014 17:02:17 +0000 (18:02 +0100)]
update TODO

5 years agofstab-generator: when running in a container, ignore fstab entries referring to devic...
Lennart Poettering [Tue, 11 Mar 2014 16:57:15 +0000 (17:57 +0100)]
fstab-generator: when running in a container, ignore fstab entries referring to device nodes

Since these device nodes will never appear in the container anyway
there's no point in waiting for them.

This makes it easier to boot images generated with general purpose
installers like Anaconda which unconditionally populate /etc/fstab to
boot in containers.

5 years agobuild-sys: sign releases
Zbigniew Jędrzejewski-Szmek [Tue, 11 Mar 2014 16:55:17 +0000 (12:55 -0400)]
build-sys: sign releases

5 years agohostnamectl: read OS pretty_name and cpe_name from remote
Djalal Harouni [Tue, 11 Mar 2014 13:57:16 +0000 (14:57 +0100)]
hostnamectl: read OS pretty_name and cpe_name from remote

5 years agohostnamed: expose OperatingSystemPrettyName and OperatingSystemCPEName on the bus
Djalal Harouni [Tue, 11 Mar 2014 13:57:15 +0000 (14:57 +0100)]
hostnamed: expose OperatingSystemPrettyName and OperatingSystemCPEName on the bus

5 years agohostnamed: minor improvements in context_write_data_other()
Djalal Harouni [Tue, 11 Mar 2014 13:57:14 +0000 (14:57 +0100)]
hostnamed: minor improvements in context_write_data_other()

Prepare context_write_data_other() and rename it to
context_write_data_machine_info()

5 years agologind: Do not fail display count if a device has no parent
Mantas Mikulėnas [Tue, 11 Mar 2014 15:49:00 +0000 (17:49 +0200)]
logind: Do not fail display count if a device has no parent

udev_device_get_parent() may return NULL when the device doesn't have a
parent, as is the case with (for example) /sys/devices/virtual/drm/ttm.

Also, log an actual error message instead of "-12 displays connected".

5 years agonspawn: fix argv[0] for getent
Mantas Mikulėnas [Tue, 11 Mar 2014 16:00:13 +0000 (18:00 +0200)]
nspawn: fix argv[0] for getent

5 years agonspawn: allow using kdbus from nspawn containers
Lennart Poettering [Tue, 11 Mar 2014 16:43:00 +0000 (17:43 +0100)]
nspawn: allow using kdbus from nspawn containers

5 years agocore: support globbing matches in DeviceAllow= when checking for device groups
Lennart Poettering [Tue, 11 Mar 2014 16:42:24 +0000 (17:42 +0100)]
core: support globbing matches in DeviceAllow= when checking for device groups

5 years agogpt-auto-generator: rename root device node symlink to /dev/gpt-auto-root
Lennart Poettering [Tue, 11 Mar 2014 16:27:58 +0000 (17:27 +0100)]
gpt-auto-generator: rename root device node symlink to /dev/gpt-auto-root

Before it was placed in /dev/disk/by-id, which makes it a bit too much
API. However, it's mostly an implementation detail for now, hence move
it out of the stable block device dir.

5 years agohwdb: Update database of Bluetooth company identifiers
Marcel Holtmann [Tue, 11 Mar 2014 16:33:31 +0000 (09:33 -0700)]
hwdb: Update database of Bluetooth company identifiers

5 years agoudev: properly detect reference to unexisting part of PROGRAM's result
Lukas Nykryn [Mon, 24 Feb 2014 16:06:21 +0000 (17:06 +0100)]
udev: properly detect reference to unexisting part of PROGRAM's result

5 years agosd-dhcp-client: use close_nointr_nofail()
Tom Gundersen [Tue, 11 Mar 2014 09:57:00 +0000 (10:57 +0100)]
sd-dhcp-client: use close_nointr_nofail()

We are already assuming the close() will not fail, so make it explicit.

5 years agonetworkd: rework startup
Tom Gundersen [Mon, 10 Mar 2014 22:40:34 +0000 (23:40 +0100)]
networkd: rework startup

Open all listenerns before loading configuration.

5 years agosd-dhcp: generalise ip header generation
Tom Gundersen [Sun, 9 Mar 2014 21:51:07 +0000 (22:51 +0100)]
sd-dhcp: generalise ip header generation

This will be needed for sd-dhcp-server.

5 years agoREADME: document that we still encourage people to turn off audit when they want...
Lennart Poettering [Tue, 11 Mar 2014 04:40:36 +0000 (05:40 +0100)]
README: document that we still encourage people to turn off audit when they want to use containers

5 years agologind: add a debug message in case the session already exists
Djalal Harouni [Wed, 19 Feb 2014 22:17:45 +0000 (23:17 +0100)]
logind: add a debug message in case the session already exists

If the session already exists then the only way to log it is to set the
debug option of pam_systemd. There are no debug messages in the login
service that permits to log if the session already exists.

So just add it, and while we are it add the "uid" field to the debug
message that indicates that the session was created.

5 years agoman: fix description of systemctl --after/--before
Andrey Borzenkov [Fri, 21 Feb 2014 16:44:06 +0000 (20:44 +0400)]
man: fix description of systemctl --after/--before

It was backward - --after fetches After property, so units shown really
come *before* unit given as argument. Same for --before.

5 years agoman: multiple sleep modes are to be separated by whitespace, not commas
Lennart Poettering [Tue, 11 Mar 2014 04:23:39 +0000 (05:23 +0100)]
man: multiple sleep modes are to be separated by whitespace, not commas

As pointed out by Jason A. Donenfeld.

5 years agosystemctl: for switch-root check, if we switch to a systemd init
Harald Hoyer [Thu, 6 Mar 2014 15:35:02 +0000 (16:35 +0100)]
systemctl: for switch-root check, if we switch to a systemd init

If "systemctl switch-root" is called with a specific "INIT" or
/proc/cmdline contains "init=", then systemd would not serialize
itsself.

Let systemctl check, if the new init is in the standard systemd
installation path and if so, clear the INIT parameter,
to let systemd serialize itsself.