chiark / gitweb /
elogind.git
6 years agotimesyncd: only run when the system has a carrier on a network interface
Tom Gundersen [Wed, 7 May 2014 13:26:47 +0000 (15:26 +0200)]
timesyncd: only run when the system has a carrier on a network interface

As the operational state detection in sd-network is still too primitive, timesyncd
will likely try to connect a bit early, so the first attempt will fail.

6 years agonetworkd-wait-online: flush monitor events after processing
Tom Gundersen [Thu, 8 May 2014 11:14:42 +0000 (13:14 +0200)]
networkd-wait-online: flush monitor events after processing

Otherwise the event will trigger immediately again.

6 years agonetworkd-wait-online: fix false positives when checking if a link is managed by networkd
Tom Gundersen [Thu, 8 May 2014 11:11:23 +0000 (13:11 +0200)]
networkd-wait-online: fix false positives when checking if a link is managed by networkd

6 years agonetworkd: link - operstate is an enum, not a bitmask
Tom Gundersen [Thu, 8 May 2014 10:32:11 +0000 (12:32 +0200)]
networkd: link - operstate is an enum, not a bitmask

6 years agocore: check the right variable for failed open()
Łukasz Stelmach [Thu, 8 May 2014 10:57:26 +0000 (12:57 +0200)]
core: check the right variable for failed open()

6 years agodoc: balance C indirections in function prototypes
Jan Engelhardt [Wed, 7 May 2014 23:28:46 +0000 (01:28 +0200)]
doc: balance C indirections in function prototypes

Shift the asterisks in the documentation's prototypes such that they
are consistent among each other. Use the right side to match what is
used in source code.

Addendum to commit v209~82.

6 years agodoc: write out stdin/stdout file descriptors
Jan Engelhardt [Wed, 7 May 2014 23:28:47 +0000 (01:28 +0200)]
doc: write out stdin/stdout file descriptors

"When refering to code, STDOUT/STDOUT/STDERR are replaced with
stdin/stdout/stderr, and in other places they are replaced with
normal phrases like standard output, etc."

Addendum to commit v209~127.

6 years agodoc: comma placement corrections and word order
Jan Engelhardt [Wed, 7 May 2014 23:28:45 +0000 (01:28 +0200)]
doc: comma placement corrections and word order

Set commas where there should be some.
Some improvements to word order.

6 years agodoc: corrections to words and forms
Jan Engelhardt [Wed, 7 May 2014 23:28:44 +0000 (01:28 +0200)]
doc: corrections to words and forms

This patch exchange words which are inappropriate for a situation,
deletes duplicated words, and adds particles where needed.

6 years agobacklight: handle saved brightness exceeding max brightness
Jani Nikula [Wed, 7 May 2014 09:01:01 +0000 (12:01 +0300)]
backlight: handle saved brightness exceeding max brightness

If too high a brightness value has been saved (e.g. due to kernel
mechanism changing from one kernel version to another, or booting the
userspace on another system), the brightness update fails and the
process exits.

Clamp saved brightness between the policy minimum introduced in

commit 7b909d7407965c03caaba30daae7aee113627a83
Author: Josh Triplett <josh@joshtriplett.org>
Date:   Tue Mar 11 21:16:33 2014 -0700

    backlight: Avoid restoring brightness to an unreadably dim level

and the absolute maximum.

https://bugs.freedesktop.org/show_bug.cgi?id=78200

6 years agopo: add Greek translation
Dimitris Spingos [Wed, 7 May 2014 16:27:02 +0000 (18:27 +0200)]
po: add Greek translation

https://bugs.freedesktop.org/show_bug.cgi?id=78064

6 years agonetworkd-wait-online: rely purely on sd-network events and drop rtnl hooks
Tom Gundersen [Wed, 7 May 2014 14:35:52 +0000 (16:35 +0200)]
networkd-wait-online: rely purely on sd-network events and drop rtnl hooks

6 years agonetworkd: link - always maintain link operstate regardless of admin state
Tom Gundersen [Wed, 7 May 2014 14:42:47 +0000 (16:42 +0200)]
networkd: link - always maintain link operstate regardless of admin state

6 years agosd-network: expose both admin and operational state directly
Tom Gundersen [Wed, 7 May 2014 14:35:05 +0000 (16:35 +0200)]
sd-network: expose both admin and operational state directly

Also add a call to check if a link is loopback, as this should commonly be ignored.

6 years agotimesyncd: shorten log message
Kay Sievers [Wed, 7 May 2014 12:45:32 +0000 (14:45 +0200)]
timesyncd: shorten log message

6 years agodoc: adhere to XML syntax
Jan Engelhardt [Sat, 3 May 2014 17:15:27 +0000 (19:15 +0200)]
doc: adhere to XML syntax

6 years agodoc: typographical fine tuning
Jan Engelhardt [Sat, 3 May 2014 17:15:24 +0000 (19:15 +0200)]
doc: typographical fine tuning

6 years agodoc: use non-contracted forms in written documents
Jan Engelhardt [Sat, 3 May 2014 17:15:23 +0000 (19:15 +0200)]
doc: use non-contracted forms in written documents

6 years agosd-dhcp-client: use asynchronous_close()
Tom Gundersen [Tue, 6 May 2014 20:59:22 +0000 (22:59 +0200)]
sd-dhcp-client: use asynchronous_close()

close() is a blocking call, which may slow things down measurably when running many dhcp
clients in the same single-threaded main loop. Let's just use the asynchronous version
instead to avoid the problem.

6 years agosd-dhcp: network - don't leak sockets on failure
Tom Gundersen [Tue, 6 May 2014 20:02:32 +0000 (22:02 +0200)]
sd-dhcp: network - don't leak sockets on failure

Also some general cleanups

6 years agosd-dhcp: network - set TOS on outgoing packets
Tom Gundersen [Tue, 6 May 2014 20:02:14 +0000 (22:02 +0200)]
sd-dhcp: network - set TOS on outgoing packets

This should improve performance on busy wireless networks and the
like. Inspired by a similar change in dnsmasq.

6 years agodhcp-network: don't pass ifindex to bind_udp_socket
Tom Gundersen [Tue, 6 May 2014 19:57:09 +0000 (21:57 +0200)]
dhcp-network: don't pass ifindex to bind_udp_socket

UDP sockets can anyway not be bound to specific netdev's. The packages would have to be filtered
when received instead.

6 years agoman: document sd_event_add_time(3)
Lennart Poettering [Tue, 6 May 2014 16:51:08 +0000 (18:51 +0200)]
man: document sd_event_add_time(3)

6 years agotimesyncd: hook up systemd-timesyncd with systemd-timedated
Lennart Poettering [Tue, 6 May 2014 16:20:49 +0000 (18:20 +0200)]
timesyncd: hook up systemd-timesyncd with systemd-timedated

Later on we will probably remove support for controlling any other NTP
implementations but systemd-timesyncd, but for now, let's keep things
generic

6 years agotimesyncd: never accept NTP time from server that is older than systemd's release...
Lennart Poettering [Tue, 6 May 2014 16:08:04 +0000 (18:08 +0200)]
timesyncd: never accept NTP time from server that is older than systemd's release time

6 years agojournald: remove some dead code
Lennart Poettering [Tue, 6 May 2014 15:03:28 +0000 (17:03 +0200)]
journald: remove some dead code

6 years agoload-fragment: minor cleanup
Lennart Poettering [Tue, 6 May 2014 15:03:09 +0000 (17:03 +0200)]
load-fragment: minor cleanup

6 years agoupdate TODO
Lennart Poettering [Tue, 6 May 2014 15:02:54 +0000 (17:02 +0200)]
update TODO

6 years agotimesyncd: read server settings from a configuration file
Lennart Poettering [Tue, 6 May 2014 15:02:11 +0000 (17:02 +0200)]
timesyncd: read server settings from a configuration file

Also, allow compiling in a default server list via a configure command
line item.

6 years agotimesyncd: when an NTP server doesn't respond, proceed with the next
Lennart Poettering [Tue, 6 May 2014 14:15:02 +0000 (16:15 +0200)]
timesyncd: when an NTP server doesn't respond, proceed with the next

6 years agolist: make LIST_FIND_TAIL work for empty lists
Lennart Poettering [Tue, 6 May 2014 11:07:15 +0000 (13:07 +0200)]
list: make LIST_FIND_TAIL work for empty lists

6 years agoupdate TODO
Lennart Poettering [Tue, 6 May 2014 11:04:29 +0000 (13:04 +0200)]
update TODO

6 years agotimesyncd: keep order of NTP servers
Lennart Poettering [Tue, 6 May 2014 10:34:03 +0000 (12:34 +0200)]
timesyncd: keep order of NTP servers

6 years agoupdate TODO
Lennart Poettering [Tue, 6 May 2014 10:33:53 +0000 (12:33 +0200)]
update TODO

6 years agotimesyncd: make sure to reread /etc/resolv.conf when we try the next NTP server
Lennart Poettering [Tue, 6 May 2014 10:33:43 +0000 (12:33 +0200)]
timesyncd: make sure to reread /etc/resolv.conf when we try the next NTP server

6 years agotimesyncd: accept NTP version 3 responses
Kay Sievers [Tue, 6 May 2014 10:29:20 +0000 (12:29 +0200)]
timesyncd: accept NTP version 3 responses

6 years agotimesyncd: add a more servers by default
Lennart Poettering [Mon, 5 May 2014 23:37:29 +0000 (01:37 +0200)]
timesyncd: add a more servers by default

6 years agotimesyncd: also try next server when sendto() fails
Lennart Poettering [Mon, 5 May 2014 23:37:13 +0000 (01:37 +0200)]
timesyncd: also try next server when sendto() fails

6 years agotimesyncd: don't busy loop when we cannot connect to any servers
Lennart Poettering [Mon, 5 May 2014 23:29:47 +0000 (01:29 +0200)]
timesyncd: don't busy loop when we cannot connect to any servers

6 years agotimesyncd: properly handle multiple configured NTP servers and multiplei IP addresses...
Lennart Poettering [Mon, 5 May 2014 23:17:35 +0000 (01:17 +0200)]
timesyncd: properly handle multiple configured NTP servers and multiplei IP addresses per server name

6 years agotimesyncd: lookup name server via sd-resolve, support IPv6, react to SIGINT/SITERM
Lennart Poettering [Mon, 5 May 2014 21:53:17 +0000 (23:53 +0200)]
timesyncd: lookup name server via sd-resolve, support IPv6, react to SIGINT/SITERM

6 years agosd-resolve: make sure we can destroy a query object from its own callback handler
Lennart Poettering [Mon, 5 May 2014 21:49:19 +0000 (23:49 +0200)]
sd-resolve: make sure we can destroy a query object from its own callback handler

6 years agosd-event: allow disabling event sources when an event object is dying anyway
Lennart Poettering [Mon, 5 May 2014 21:48:25 +0000 (23:48 +0200)]
sd-event: allow disabling event sources when an event object is dying anyway

6 years agosd-event: make it easy to bind signal handling to event loop exits
Lennart Poettering [Mon, 5 May 2014 21:47:56 +0000 (23:47 +0200)]
sd-event: make it easy to bind signal handling to event loop exits

By passing a NULL callback provide a simple way to make event loops exit
on SIGTERM and other signals.

6 years agotimesync: use safe_close() where possible
Lennart Poettering [Mon, 5 May 2014 19:47:38 +0000 (21:47 +0200)]
timesync: use safe_close() where possible

6 years agotimesync: always initialize structs when declaring them as far as possible with conts...
Lennart Poettering [Mon, 5 May 2014 19:47:09 +0000 (21:47 +0200)]
timesync: always initialize structs when declaring them as far as possible with contsant values

6 years agobuild-sys: enable timesyncd by default
Lennart Poettering [Mon, 5 May 2014 19:39:10 +0000 (21:39 +0200)]
build-sys: enable timesyncd by default

6 years agoupdate TODO
Lennart Poettering [Mon, 5 May 2014 19:18:54 +0000 (21:18 +0200)]
update TODO

6 years agobuild-sys: move async.[ch] to src/shared
Lennart Poettering [Mon, 5 May 2014 19:18:34 +0000 (21:18 +0200)]
build-sys: move async.[ch] to src/shared

So that we can use it at multiple places.

6 years agocore: require cgroups filesystem to be available
Kay Sievers [Mon, 5 May 2014 16:49:43 +0000 (18:49 +0200)]
core: require cgroups filesystem to be available

We should no longer pretend that we can run in any sensible way
without the kernel supporting us with cgroups functionality.

6 years agohwdb: update
Kay Sievers [Mon, 5 May 2014 12:23:10 +0000 (14:23 +0200)]
hwdb: update

6 years agotimesyncd: log drift value as signed
Kay Sievers [Mon, 5 May 2014 12:21:40 +0000 (14:21 +0200)]
timesyncd: log drift value as signed

6 years agosd-rtnl-message: append - fix uninitialized memory
Tom Gundersen [Fri, 2 May 2014 20:29:18 +0000 (22:29 +0200)]
sd-rtnl-message: append - fix uninitialized memory

We were not properly clearing the padding at the front of some containers.

6 years agosd-rtnl: route - allow setting multiple matching routes
Tom Gundersen [Fri, 2 May 2014 13:49:40 +0000 (15:49 +0200)]
sd-rtnl: route - allow setting multiple matching routes

6 years agoTODO
Tom Gundersen [Wed, 30 Apr 2014 08:37:13 +0000 (10:37 +0200)]
TODO

6 years agotimesyncd: log drift correction
Kay Sievers [Sat, 3 May 2014 13:03:27 +0000 (15:03 +0200)]
timesyncd: log drift correction

6 years agoasync: add asynchronous close() call
Lennart Poettering [Fri, 2 May 2014 15:56:05 +0000 (17:56 +0200)]
async: add asynchronous close() call

6 years agoupdate TODO
Lennart Poettering [Fri, 2 May 2014 15:56:01 +0000 (17:56 +0200)]
update TODO

6 years agotimesyncd: use nanosecond mode
Kay Sievers [Wed, 30 Apr 2014 14:55:10 +0000 (16:55 +0200)]
timesyncd: use nanosecond mode

6 years agotimesyncd: remove debug code
Kay Sievers [Wed, 30 Apr 2014 07:37:47 +0000 (09:37 +0200)]
timesyncd: remove debug code

6 years agonetworkd: dont configure route if lease doesn't have one
Umut Tezduyar Lindskog [Tue, 29 Apr 2014 20:40:38 +0000 (22:40 +0200)]
networkd: dont configure route if lease doesn't have one

6 years agosd-network: add support for only listening to some types of changes
Tom Gundersen [Tue, 29 Apr 2014 20:27:29 +0000 (22:27 +0200)]
sd-network: add support for only listening to some types of changes

6 years agotimesyncd: limit debug values to milliseconds
Kay Sievers [Tue, 29 Apr 2014 21:48:23 +0000 (23:48 +0200)]
timesyncd: limit debug values to milliseconds

6 years agoupdate TODO
Michal Sekletar [Tue, 29 Apr 2014 20:15:47 +0000 (22:15 +0200)]
update TODO

6 years agosd-dhcp-lease: fix double realloc
Tom Gundersen [Tue, 29 Apr 2014 19:57:11 +0000 (21:57 +0200)]
sd-dhcp-lease: fix double realloc

6 years agobuild-sys: fix linking order for networkd-wait-only
Kay Sievers [Tue, 29 Apr 2014 14:26:09 +0000 (16:26 +0200)]
build-sys: fix linking order for networkd-wait-only

6 years agosd-resolve: rework sd-resolve to be callback based, similar in style to sd-bus and...
Lennart Poettering [Tue, 29 Apr 2014 13:44:31 +0000 (15:44 +0200)]
sd-resolve: rework sd-resolve to be callback based, similar in style to sd-bus and sd-event

6 years agonetworkd: fix distcheck
Tom Gundersen [Tue, 29 Apr 2014 13:42:05 +0000 (15:42 +0200)]
networkd: fix distcheck

6 years agosd-dhcp-lease: (de)serialize DNS and NTP servers
Tom Gundersen [Tue, 29 Apr 2014 11:29:12 +0000 (13:29 +0200)]
sd-dhcp-lease: (de)serialize DNS and NTP servers

Also use inet_ntoa rather than inet_ntop.

6 years agosd-dhcp-leaes: use newdup()
Tom Gundersen [Tue, 29 Apr 2014 10:46:06 +0000 (12:46 +0200)]
sd-dhcp-leaes: use newdup()

6 years agosd-dhcp-lease: add NTP support
Tom Gundersen [Tue, 29 Apr 2014 10:17:27 +0000 (12:17 +0200)]
sd-dhcp-lease: add NTP support

Export the NTP servers so timesyncd can use them.

6 years agotimesyncd: update log message
Kay Sievers [Tue, 29 Apr 2014 08:16:07 +0000 (10:16 +0200)]
timesyncd: update log message

6 years agotimesyncd: add unit and man page
Kay Sievers [Tue, 29 Apr 2014 06:57:51 +0000 (08:57 +0200)]
timesyncd: add unit and man page

6 years agomachine-id: only look into KVM uuid when we are not running in a
Lennart Poettering [Mon, 28 Apr 2014 16:11:40 +0000 (18:11 +0200)]
machine-id: only look into KVM uuid when we are not running in a
container

6 years agorename timedate-sntp to timesync
Kay Sievers [Mon, 28 Apr 2014 12:45:42 +0000 (14:45 +0200)]
rename timedate-sntp to timesync

6 years agoconf-parser: Fix typo in comment
Jonathan Boulle [Mon, 28 Apr 2014 06:15:50 +0000 (08:15 +0200)]
conf-parser: Fix typo in comment

Fix minor typo in conf parser

6 years agonetworkd: link - don't fail a link if RF kill is active
Tom Gundersen [Sun, 27 Apr 2014 22:16:46 +0000 (00:16 +0200)]
networkd: link - don't fail a link if RF kill is active

6 years agoTODO: network
Tom Gundersen [Sun, 27 Apr 2014 09:23:30 +0000 (11:23 +0200)]
TODO: network

6 years agonetworkd: netdev - log when loading a .netdev file
Tom Gundersen [Sun, 27 Apr 2014 11:15:35 +0000 (13:15 +0200)]
networkd: netdev - log when loading a .netdev file

6 years agonetworkd: update TODO
Umut Tezduyar Lindskog [Sun, 27 Apr 2014 21:45:42 +0000 (23:45 +0200)]
networkd: update TODO

6 years agosd-dhcp-client: log positive error number
Umut Tezduyar Lindskog [Sun, 27 Apr 2014 20:01:42 +0000 (22:01 +0200)]
sd-dhcp-client: log positive error number

Log error no for such client_stop(client, DHCP_EVENT_STOP)

6 years agolibnetworkd: add link local tests
Umut Tezduyar Lindskog [Sun, 27 Apr 2014 19:58:26 +0000 (21:58 +0200)]
libnetworkd: add link local tests

- Also only allow positive ifindex on both dhcp and ipv4ll

[tomegun: the kernel always sets a positive ifindex, but some APIs accept
          ifindex=0 with various meanings, so we should protect against
          accidentally passing ifindex=0 along.]

6 years agonetworkd: do not complain about IFF_RUNNING
Umut Tezduyar Lindskog [Sun, 27 Apr 2014 20:33:42 +0000 (22:33 +0200)]
networkd: do not complain about IFF_RUNNING

Otherwise:
eth0: unknown link flags gained: 0x00040 (ignoring)

[tomegun: hiding these messages is ok, as IFF_RUNNING is redundant
          and can be deduced from operstate and IFF_LOWER_UP]

6 years agojob: add waiting jobs to run queue in unit_coldplug
Brandon Philips [Fri, 25 Apr 2014 15:31:59 +0000 (09:31 -0600)]
job: add waiting jobs to run queue in unit_coldplug

When we have job installed and added to run queue for service which is
still in dead state and systemd initiates reload then after reload we
never add deserialized job to the run queue again. This is caused by
check in service_coldplug() where we check if deserialized state is
something else than dead state, which is not the case thus we never call
service_set_state() and finally unit_notify() where we would have added
job to the run queue.

Thanks to Michal Sekletar <msekleta@redhat.com> for the original patch.

6 years agobuild-sys: add configure switch for -fsanitize=undefined
Zbigniew Jędrzejewski-Szmek [Thu, 24 Apr 2014 18:49:15 +0000 (20:49 +0200)]
build-sys: add configure switch for -fsanitize=undefined

--enable-undefined-sanitizer mirrors --enable-memory-sanitizer.

6 years agotest-journal-flush: avoid predictable names in /var/tmp
Zbigniew Jędrzejewski-Szmek [Fri, 25 Apr 2014 23:58:21 +0000 (19:58 -0400)]
test-journal-flush: avoid predictable names in /var/tmp

6 years agoman: networkd typo fixes
poma [Sat, 26 Apr 2014 09:09:45 +0000 (11:09 +0200)]
man: networkd typo fixes

6 years agonetworkd-wait-online: refactor a bit
Tom Gundersen [Thu, 24 Apr 2014 19:32:25 +0000 (21:32 +0200)]
networkd-wait-online: refactor a bit

Clarify that we are waiting for any link to reach 'carrier' state, regardless
of who manages it. This will be useful when we add support for waiting for more
operational states.

6 years agonetworkd-wait-online: drop config file and add commandline options instead
Tom Gundersen [Thu, 24 Apr 2014 19:28:46 +0000 (21:28 +0200)]
networkd-wait-online: drop config file and add commandline options instead

6 years agocore: reindent {selinux, ima, smack}-setup.c
Will Woods [Fri, 25 Apr 2014 22:26:33 +0000 (18:26 -0400)]
core: reindent {selinux, ima, smack}-setup.c

7-space indentation is just too weird to leave alone.
Make it 8 spaces, as per CODING_STYLE. No other changes.

6 years agoupdate TODO
Lennart Poettering [Fri, 25 Apr 2014 11:28:02 +0000 (13:28 +0200)]
update TODO

6 years agocore: expose CFS CPU time quota as high-level unit properties
Lennart Poettering [Fri, 25 Apr 2014 11:27:25 +0000 (13:27 +0200)]
core: expose CFS CPU time quota as high-level unit properties

6 years agocore: make sure we always write changed cgroup attributes to the cgroupfs
Lennart Poettering [Fri, 25 Apr 2014 11:26:37 +0000 (13:26 +0200)]
core: make sure we always write changed cgroup attributes to the cgroupfs

6 years agoupdate TODO
Lennart Poettering [Fri, 25 Apr 2014 05:16:01 +0000 (07:16 +0200)]
update TODO

6 years agobootchart: print to stdout and display default values in help
Zbigniew Jędrzejewski-Szmek [Thu, 24 Apr 2014 23:16:37 +0000 (19:16 -0400)]
bootchart: print to stdout and display default values in help

6 years agobootchart: rewrite usage message more generally
WaLyong Cho [Thu, 24 Apr 2014 15:50:52 +0000 (00:50 +0900)]
bootchart: rewrite usage message more generally

6 years agobootchart: add control group option
WaLyong Cho [Thu, 24 Apr 2014 15:50:51 +0000 (00:50 +0900)]
bootchart: add control group option

6 years agoudev: warn when name_to_handle_at is not implemented
Zbigniew Jędrzejewski-Szmek [Sun, 20 Apr 2014 17:57:26 +0000 (13:57 -0400)]
udev: warn when name_to_handle_at is not implemented

We have a bunch of reports from people who have a custom kernel and
are confused why udev is not running. Issue a warning on
error. Barring an error in the code, the only error that is possible
is ENOSYS.

https://bugzilla.redhat.com/show_bug.cgi?id=1072966

6 years agoservice: rename StartLimitAction enum to FailureAction
Michael Olbrich [Thu, 24 Apr 2014 07:35:38 +0000 (09:35 +0200)]
service: rename StartLimitAction enum to FailureAction

It's used for the FailureAction property as well.

6 years agoservice: add FailureAction= option
Michael Olbrich [Thu, 24 Apr 2014 07:35:37 +0000 (09:35 +0200)]
service: add FailureAction= option

It has the same possible values as StartLimitAction= and is executed
immediately if a service fails.