| 2012-11-29 |
Ian Jackson | anke-gps-bracket: post-prototype size adjustments
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | pronsolerc: retract and prefeed buttons
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: better list of debugging toplevels...
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: bevel the back
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: should fit in one plate
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: actual sizes
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: body lhs and rhs ok
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: gps assembled ok
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: before plug adjust
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: plugslop
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: initial gps body model
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | dungeonquest-cone: One and Four toplevels
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | dungeonquest-cone: reduce temperatures
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | Merge branch 'master' of chiark:/u/ianmdlvl/reprap...
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | dungeonquest-cone: initial
|
commit | commitdiff | tree |
| 2012-11-24 |
Ian Jackson | filamentspool: FilamentCup: two prongs
|
commit | commitdiff | tree |
| 2012-11-24 |
Ian Jackson | slic3r-config, etc.: increase temperatures, restore...
|
commit | commitdiff | tree |
| 2012-11-24 |
Ian Jackson | INSTRUCTIONS: slic3r rune
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: RearCableProtector: add 10mm...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: ChannelBracket: initial
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: ChannelBracket: initial
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: ChannelBracket: wip
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: RearCableProtector: diagonal...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: initial RearCableProtector
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: try again with no pad (less...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: try again with no pad
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: no pads since we need no lid...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: remove obsolete setting
|
commit | commitdiff | tree |
| 2012-11-12 |
Ian Jackson | slic3r-config add G1 Z10
|
commit | commitdiff | tree |
| 2012-11-11 |
Ian Jackson | pawn change settings for sticking to new bed
|
commit | commitdiff | tree |
| 2012-10-22 |
Ian Jackson | xeno-drivebay-bracket BracketR came out OK
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket final(?) size adjustments
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket adjustments
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket measurements of screws etc.
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | Makefile remove %.slic3r dep, fails to cope if missing
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket in Makefile
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket fancy web shape, kit, etc.
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket fancy wall shape
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket before wall polygon
|
commit | commitdiff | tree |
| 2012-10-21 |
Ian Jackson | xeno-drivebay-bracket wip
|
commit | commitdiff | tree |
| 2012-10-19 |
Ian Jackson | pawn good slic3r settings for use with glass bed
|
commit | commitdiff | tree |
| 2012-10-19 |
Ian Jackson | pawn 3 skirts
|
commit | commitdiff | tree |
| 2012-10-19 |
Ian Jackson | Makefile do dependency for %.slic3r
|
commit | commitdiff | tree |
| 2012-10-19 |
Ian Jackson | pawn higher temp for glass bed
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle kit for test #5
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle Trestle adjust pin holes #5
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle Trestle adjust pin holes
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle measurements
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle tuning
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle make bar resolution better
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle make hub more plausible
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle make hub more economical
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle make demo toplevel
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle remove demo
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle pinholes really all the way through
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle TestKit improve
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | axlepin provide AxlePin_zoffset
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | Makefile %.auto.{scads,stls} rule
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle extend pin
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle colourful demo
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle HubEnd
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | filamenttrestle HubEnd
|
commit | commitdiff | tree |
| 2012-10-18 |
Ian Jackson | doveclip break out ExtenderPillar nfc
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle wip HubEnd
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle wip HubEnd
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle pinhole all way through
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle adjustments
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle demo
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | axlepin move pin centre to origin
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle new bar
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle wip pin etc.
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | axlepin break out Washer from filamentspool
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | axlepin break out from filamentspool
|
commit | commitdiff | tree |
| 2012-10-17 |
Ian Jackson | filamenttrestle wip with spool core circular bar
|
commit | commitdiff | tree |
| 2012-10-14 |
Ian Jackson | slic3r-config warptest2 shows that higher temps work...
|
commit | commitdiff | tree |
| 2012-10-14 |
Ian Jackson | slic3r-config: warptest2 shows decreased nozzle temp...
|
commit | commitdiff | tree |
| 2012-10-14 |
Ian Jackson | warptest2 before print
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | filamenttrestle turn kit on again
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | slic3r-config set body temp to 190, help prevent warping?
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | filamenttrestle adjustments after 1
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | filamenttrestle define toplevels
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | pronsolerc work around dodgy temp control by setting...
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | filamenttrestle adjust block hole
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | filamenttrestle test kit
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | filamenttrestle triangular pins tuning etc.
|
commit | commitdiff | tree |
| 2012-10-11 |
Ian Jackson | filamenttrestle legw, more tuning
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle more tuning
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle thicker block
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle block side thick right
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle pin holes in right place
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle topcyl -> topblock nfc
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle plug hole height adjust right directions
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle plug hole height adjust right direction?
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle wip now triangular pins
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle wip square pin holes, before make triangular
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle wip square pin holes
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | filamenttrestle wip pin holes
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | Merge branch 'master' of chiark:/u/ianmdlvl/reprap...
|
commit | commitdiff | tree |
| 2012-10-10 |
Ian Jackson | Makefiles etc.: support *.slic3r files and move pawn...
|
commit | commitdiff | tree |
| 2012-10-07 |
Ian Jackson | pawn cooler is good, try bigger
|
commit | commitdiff | tree |
| next |
~ianmdlvl / reprap-play.git / search