chiark / gitweb /
slic3r-config warptest2 shows that higher temps work better
authorIan Jackson <ijackson@chiark.greenend.org.uk>
Sun, 14 Oct 2012 22:13:44 +0000 (23:13 +0100)
committerIan Jackson <ijackson@chiark.greenend.org.uk>
Sun, 14 Oct 2012 22:13:44 +0000 (23:13 +0100)
slic3r-config.ini

index e486180..794667c 100644 (file)
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sun Oct 14 22:11:17 2012
+# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 80
+bed_temperature = 90
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 70
+first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 210
+temperature = 215
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130