| 2017-06-03 |
Ian Jackson | Makefile: drop utils.scad from AUTOINCS
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: Test uses hull, not minkowski
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: Test: introduce shufflesz (nfc)
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: Machine Rear: add z slop to "tablet"
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: FitTest: remove bracing from Front and...
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: Machine: extend and fix
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: FitTest: Front and Rear
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: FitTest: break out FitTest_general (nfc)
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: adjust FitTest
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: adjust tablet
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: deploy
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: correct z
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: slant
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: swap coords to same way...
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: wip, front section
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: wip, rear section
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: wip, mid section
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: scale
|
commit | commitdiff | tree |
| 2017-06-03 |
Ian Jackson | sewing-table: NewRearCurve: wip, need scale
|
commit | commitdiff | tree |
| 2017-05-31 |
Ian Jackson | sewing-table: Machine_NewRearProfile wip
|
commit | commitdiff | tree |
| 2017-05-31 |
Ian Jackson | sewing-table: Machine_NewRearProfile wip
|
commit | commitdiff | tree |
| 2017-05-31 |
Ian Jackson | sewing-table: rear-profile: profile main spline
|
commit | commitdiff | tree |
| 2017-05-31 |
Ian Jackson | sewing-table: profile wip
|
commit | commitdiff | tree |
| 2017-05-29 |
Ian Jackson | sewing-table: FitTest bracing
|
commit | commitdiff | tree |
| 2017-05-26 |
Ian Jackson | sewing-table: FitTest bracing wip
|
commit | commitdiff | tree |
| 2017-05-26 |
Ian Jackson | sewing-table: FitTest move (nfc)
|
commit | commitdiff | tree |
| 2017-05-26 |
Ian Jackson | sewing-table: FitTest wip
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: commitid (non-TEST): centering
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: commitids (non-TEST): break out cidsz...
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: TEST commitid: put roughly in middle...
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: TEST commitid: rotate so counter is in...
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: TEST commitid: break out cidsz (nfc)
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: fix commitid overlap bug
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: introduce POST_TCROSSSZ (for TEST only...
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: add some z slop to front curve
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: fix post calculation (nfc for Tile10...
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: wip Tile00
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: move tile_01_00_cnr (nfc)
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: adjust some c0 formulae (nfc)
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: add front curve
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: move first_front (nfc)
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: rename Rear to Curves - we will do them...
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: fix wrong rearcurve_strt_len setting
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: remove some obsolete settings (nfc)
|
commit | commitdiff | tree |
| 2017-05-25 |
Ian Jackson | sewing-table: make rearcurve_avoid_y a constant
|
commit | commitdiff | tree |
| 2017-05-24 |
Ian Jackson | sewing-table: fix Machine_Rear to have slop again
|
commit | commitdiff | tree |
| 2017-05-24 |
Ian Jackson | sewing-table: replace Machine_Rear with new profile...
|
commit | commitdiff | tree |
| 2017-05-24 |
Ian Jackson | sewing-table: Machine_Rear: break up a translate (nfc)
|
commit | commitdiff | tree |
| 2017-05-24 |
Ian Jackson | sewing-table: Machine_RearProfile
|
commit | commitdiff | tree |
| 2017-05-24 |
Ian Jackson | sewing-table: Machine profile adjustments by eye to...
|
commit | commitdiff | tree |
| 2017-05-24 |
Ian Jackson | sewing-table: wip new machine profile
|
commit | commitdiff | tree |
| 2017-05-23 |
Ian Jackson | sewing-table: move origin (nfc other than translation)
|
commit | commitdiff | tree |
| 2017-05-23 |
Ian Jackson | sewing-table: introduce tile02_tr and use it and tile01_tr...
|
commit | commitdiff | tree |
| 2017-05-22 |
Ian Jackson | sewing-table: Machine_Rear: adj rearcurve_rad_slop...
|
commit | commitdiff | tree |
| 2017-05-22 |
Ian Jackson | sewing-table: Machine_Rear: reartablet, and fix x
|
commit | commitdiff | tree |
| 2017-05-22 |
Ian Jackson | sewing-table: Machine_Rear: reartablet wip
|
commit | commitdiff | tree |
| 2017-05-22 |
Ian Jackson | sewing-table: Tile10: fixes, just reartablet to do
|
commit | commitdiff | tree |
| 2017-05-22 |
Ian Jackson | sewing-table: MachineRear: fixes
|
commit | commitdiff | tree |
| 2017-05-22 |
Ian Jackson | sewing-table: MachineRear: fixed too slow, other fixes
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: MachineRear: wip trying to fix too slow
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile10, MachineRear: wip fixing
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: MachineRear seems plausible
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: break out cutout_l_end_x (nfc)
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile01 seems good!
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile01 wip
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile11 seems good!
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: MachineArm cutout round end
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: work around machine cutout in test pieces
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile11 wip machine cutout
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile11 wip
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Introduce Rectangle_TileBase, and a call...
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile12: add interlock edge for Tile11
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: introduce some cutout_* parameters (nfc)
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: introduce R_EDGE (nfc)
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: Tile12: rounded corner in right place
|
commit | commitdiff | tree |
| 2017-05-21 |
Ian Jackson | sewing-table: some comments (nfc)
|
commit | commitdiff | tree |
| 2017-02-26 |
Ian Jackson | Makefile: set AUTOINCS with +=
|
commit | commitdiff | tree |
| 2017-02-11 |
Ian Jackson | maglite-holder: set miniature to 1
|
commit | commitdiff | tree |
| 2017-02-02 |
Ian Jackson | maglite-holder: introduce movement_extra_angle
|
commit | commitdiff | tree |
| 2017-02-02 |
Ian Jackson | maglite-holder: more slop
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: test print
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: miniature feature
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: Commitid really
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: Commitid
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: Bracket as toplevel
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: toplevels in Makefile
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: toplevels
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: torch slop done
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: compute scaling and centre translation...
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: torch colour for test
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: torch scale adjustment
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: soup up demo
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: adjust
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: torch slop
|
commit | commitdiff | tree |
| 2017-02-01 |
Ian Jackson | maglite-holder: screw holes
|
commit | commitdiff | tree |
| 2017-01-31 |
Ian Jackson | maglite-holder: some xxxs
|
commit | commitdiff | tree |
| 2017-01-31 |
Ian Jackson | maglite-holder: quite nice now
|
commit | commitdiff | tree |
| 2017-01-31 |
Ian Jackson | maglite-holder: shape tuning
|
commit | commitdiff | tree |
| 2017-01-31 |
Ian Jackson | maglite-holder: nice shape...
|
commit | commitdiff | tree |
| 2017-01-31 |
Ian Jackson | maglite-holder: wip holder, before project
|
commit | commitdiff | tree |
| next |
~ianmdlvl / reprap-play.git / search