chiark / gitweb /
reprap-play.git
6 years agodungeonquest-cone: reduce temperatures
Ian Jackson [Sun, 25 Nov 2012 00:50:20 +0000 (00:50 +0000)]
dungeonquest-cone: reduce temperatures

6 years agoMerge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Sun, 25 Nov 2012 00:46:55 +0000 (00:46 +0000)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play

6 years agodungeonquest-cone: initial
Ian Jackson [Sun, 25 Nov 2012 00:46:01 +0000 (00:46 +0000)]
dungeonquest-cone: initial

6 years agofilamentspool: FilamentCup: two prongs
Ian Jackson [Sat, 24 Nov 2012 22:13:12 +0000 (22:13 +0000)]
filamentspool: FilamentCup: two prongs

6 years agoslic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable...
Ian Jackson [Sat, 24 Nov 2012 22:12:46 +0000 (22:12 +0000)]
slic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable for flattish things with poor adhesion

6 years agoINSTRUCTIONS: slic3r rune
Ian Jackson [Sat, 24 Nov 2012 18:56:31 +0000 (18:56 +0000)]
INSTRUCTIONS: slic3r rune

6 years agoxeno-drivebay-bracket: RearCableProtector: add 10mm to protinnerh
Ian Jackson [Sat, 17 Nov 2012 17:10:55 +0000 (17:10 +0000)]
xeno-drivebay-bracket: RearCableProtector: add 10mm to protinnerh

6 years agoxeno-drivebay-bracket: ChannelBracket: initial
Ian Jackson [Sat, 17 Nov 2012 16:12:11 +0000 (16:12 +0000)]
xeno-drivebay-bracket: ChannelBracket: initial

6 years agoxeno-drivebay-bracket: ChannelBracket: initial
Ian Jackson [Sat, 17 Nov 2012 16:12:02 +0000 (16:12 +0000)]
xeno-drivebay-bracket: ChannelBracket: initial

6 years agoxeno-drivebay-bracket: ChannelBracket: wip
Ian Jackson [Sat, 17 Nov 2012 16:06:22 +0000 (16:06 +0000)]
xeno-drivebay-bracket: ChannelBracket: wip

6 years agoxeno-drivebay-bracket: RearCableProtector: diagonal screw holes
Ian Jackson [Sat, 17 Nov 2012 15:37:11 +0000 (15:37 +0000)]
xeno-drivebay-bracket: RearCableProtector: diagonal screw holes

6 years agoxeno-drivebay-bracket: initial RearCableProtector
Ian Jackson [Sat, 17 Nov 2012 15:35:29 +0000 (15:35 +0000)]
xeno-drivebay-bracket: initial RearCableProtector

6 years agoxeno-drivebay-bracket: try again with no pad (less web)
Ian Jackson [Sat, 17 Nov 2012 14:49:03 +0000 (14:49 +0000)]
xeno-drivebay-bracket: try again with no pad (less web)

6 years agoxeno-drivebay-bracket: try again with no pad
Ian Jackson [Sat, 17 Nov 2012 14:46:29 +0000 (14:46 +0000)]
xeno-drivebay-bracket: try again with no pad

6 years agoxeno-drivebay-bracket: no pads since we need no lid any more
Ian Jackson [Sat, 17 Nov 2012 13:59:59 +0000 (13:59 +0000)]
xeno-drivebay-bracket: no pads since we need no lid any more

6 years agoxeno-drivebay-bracket: remove obsolete setting
Ian Jackson [Sat, 17 Nov 2012 13:59:45 +0000 (13:59 +0000)]
xeno-drivebay-bracket: remove obsolete setting

6 years agoslic3r-config add G1 Z10
Ian Jackson [Mon, 12 Nov 2012 01:34:34 +0000 (01:34 +0000)]
slic3r-config add G1 Z10

6 years agopawn change settings for sticking to new bed
Ian Jackson [Sun, 11 Nov 2012 16:27:22 +0000 (16:27 +0000)]
pawn change settings for sticking to new bed

7 years agoxeno-drivebay-bracket BracketR came out OK
Ian Jackson [Mon, 22 Oct 2012 00:47:41 +0000 (01:47 +0100)]
xeno-drivebay-bracket BracketR came out OK

7 years agoxeno-drivebay-bracket final(?) size adjustments
Ian Jackson [Sun, 21 Oct 2012 23:52:41 +0000 (00:52 +0100)]
xeno-drivebay-bracket final(?) size adjustments

7 years agoxeno-drivebay-bracket adjustments
Ian Jackson [Sun, 21 Oct 2012 23:15:20 +0000 (00:15 +0100)]
xeno-drivebay-bracket adjustments

7 years agoxeno-drivebay-bracket measurements of screws etc.
Ian Jackson [Sun, 21 Oct 2012 22:09:02 +0000 (23:09 +0100)]
xeno-drivebay-bracket measurements of screws etc.

7 years agoMakefile remove %.slic3r dep, fails to cope if missing
Ian Jackson [Sun, 21 Oct 2012 19:04:47 +0000 (20:04 +0100)]
Makefile remove %.slic3r dep, fails to cope if missing

7 years agoxeno-drivebay-bracket in Makefile
Ian Jackson [Sun, 21 Oct 2012 19:01:10 +0000 (20:01 +0100)]
xeno-drivebay-bracket in Makefile

7 years agoxeno-drivebay-bracket fancy web shape, kit, etc.
Ian Jackson [Sun, 21 Oct 2012 18:59:58 +0000 (19:59 +0100)]
xeno-drivebay-bracket fancy web shape, kit, etc.

7 years agoxeno-drivebay-bracket fancy wall shape
Ian Jackson [Sun, 21 Oct 2012 18:52:39 +0000 (19:52 +0100)]
xeno-drivebay-bracket fancy wall shape

7 years agoxeno-drivebay-bracket before wall polygon
Ian Jackson [Sun, 21 Oct 2012 18:45:49 +0000 (19:45 +0100)]
xeno-drivebay-bracket before wall polygon

7 years agoxeno-drivebay-bracket wip
Ian Jackson [Sun, 21 Oct 2012 17:33:32 +0000 (18:33 +0100)]
xeno-drivebay-bracket wip

7 years agopawn good slic3r settings for use with glass bed
Ian Jackson [Fri, 19 Oct 2012 21:06:58 +0000 (22:06 +0100)]
pawn  good slic3r settings for use with glass bed

7 years agopawn 3 skirts
Ian Jackson [Fri, 19 Oct 2012 18:33:50 +0000 (19:33 +0100)]
pawn 3 skirts

7 years agoMakefile do dependency for %.slic3r
Ian Jackson [Fri, 19 Oct 2012 18:32:09 +0000 (19:32 +0100)]
Makefile do dependency for %.slic3r

7 years agopawn higher temp for glass bed
Ian Jackson [Fri, 19 Oct 2012 18:30:35 +0000 (19:30 +0100)]
pawn higher temp for glass bed

7 years agofilamenttrestle kit for test #5
Ian Jackson [Thu, 18 Oct 2012 20:01:59 +0000 (21:01 +0100)]
filamenttrestle kit for test #5

7 years agofilamenttrestle Trestle adjust pin holes #5
Ian Jackson [Thu, 18 Oct 2012 19:59:14 +0000 (20:59 +0100)]
filamenttrestle Trestle adjust pin holes #5

7 years agofilamenttrestle Trestle adjust pin holes
Ian Jackson [Thu, 18 Oct 2012 19:05:56 +0000 (20:05 +0100)]
filamenttrestle Trestle adjust pin holes

7 years agofilamenttrestle measurements
Ian Jackson [Thu, 18 Oct 2012 09:15:25 +0000 (10:15 +0100)]
filamenttrestle measurements

7 years agofilamenttrestle tuning
Ian Jackson [Thu, 18 Oct 2012 01:43:59 +0000 (02:43 +0100)]
filamenttrestle tuning

7 years agofilamenttrestle make bar resolution better
Ian Jackson [Thu, 18 Oct 2012 01:30:53 +0000 (02:30 +0100)]
filamenttrestle make bar resolution better

7 years agofilamenttrestle make hub more plausible
Ian Jackson [Thu, 18 Oct 2012 01:22:21 +0000 (02:22 +0100)]
filamenttrestle make hub more plausible

7 years agofilamenttrestle make hub more economical
Ian Jackson [Thu, 18 Oct 2012 01:22:14 +0000 (02:22 +0100)]
filamenttrestle make hub more economical

7 years agofilamenttrestle make demo toplevel
Ian Jackson [Thu, 18 Oct 2012 00:53:07 +0000 (01:53 +0100)]
filamenttrestle make demo toplevel

7 years agofilamenttrestle remove demo
Ian Jackson [Thu, 18 Oct 2012 00:52:52 +0000 (01:52 +0100)]
filamenttrestle remove demo

7 years agofilamenttrestle pinholes really all the way through
Ian Jackson [Thu, 18 Oct 2012 00:49:09 +0000 (01:49 +0100)]
filamenttrestle pinholes really all the way through

7 years agofilamenttrestle TestKit improve
Ian Jackson [Thu, 18 Oct 2012 00:46:15 +0000 (01:46 +0100)]
filamenttrestle TestKit improve

7 years agoaxlepin provide AxlePin_zoffset
Ian Jackson [Thu, 18 Oct 2012 00:45:53 +0000 (01:45 +0100)]
axlepin provide AxlePin_zoffset

7 years agoMakefile %.auto.{scads,stls} rule
Ian Jackson [Thu, 18 Oct 2012 00:38:37 +0000 (01:38 +0100)]
Makefile %.auto.{scads,stls} rule

7 years agofilamenttrestle extend pin
Ian Jackson [Thu, 18 Oct 2012 00:31:30 +0000 (01:31 +0100)]
filamenttrestle extend pin

7 years agofilamenttrestle colourful demo
Ian Jackson [Thu, 18 Oct 2012 00:25:26 +0000 (01:25 +0100)]
filamenttrestle colourful demo

7 years agofilamenttrestle HubEnd
Ian Jackson [Thu, 18 Oct 2012 00:25:16 +0000 (01:25 +0100)]
filamenttrestle HubEnd

7 years agofilamenttrestle HubEnd
Ian Jackson [Thu, 18 Oct 2012 00:11:06 +0000 (01:11 +0100)]
filamenttrestle HubEnd

7 years agodoveclip break out ExtenderPillar nfc
Ian Jackson [Thu, 18 Oct 2012 00:06:29 +0000 (01:06 +0100)]
doveclip break out ExtenderPillar nfc

7 years agofilamenttrestle wip HubEnd
Ian Jackson [Wed, 17 Oct 2012 23:59:26 +0000 (00:59 +0100)]
filamenttrestle wip HubEnd

7 years agofilamenttrestle wip HubEnd
Ian Jackson [Wed, 17 Oct 2012 23:54:10 +0000 (00:54 +0100)]
filamenttrestle wip HubEnd

7 years agofilamenttrestle pinhole all way through
Ian Jackson [Wed, 17 Oct 2012 20:51:33 +0000 (21:51 +0100)]
filamenttrestle pinhole all way through

7 years agofilamenttrestle adjustments
Ian Jackson [Wed, 17 Oct 2012 20:41:03 +0000 (21:41 +0100)]
filamenttrestle adjustments

7 years agofilamenttrestle demo
Ian Jackson [Wed, 17 Oct 2012 20:30:35 +0000 (21:30 +0100)]
filamenttrestle demo

7 years agoaxlepin move pin centre to origin
Ian Jackson [Wed, 17 Oct 2012 20:30:23 +0000 (21:30 +0100)]
axlepin  move pin centre to origin

7 years agofilamenttrestle new bar
Ian Jackson [Wed, 17 Oct 2012 20:17:33 +0000 (21:17 +0100)]
filamenttrestle new bar

7 years agofilamenttrestle wip pin etc.
Ian Jackson [Wed, 17 Oct 2012 17:29:48 +0000 (18:29 +0100)]
filamenttrestle wip pin etc.

7 years agoaxlepin break out Washer from filamentspool
Ian Jackson [Wed, 17 Oct 2012 17:27:41 +0000 (18:27 +0100)]
axlepin  break out Washer from filamentspool

7 years agoaxlepin break out from filamentspool
Ian Jackson [Wed, 17 Oct 2012 17:23:32 +0000 (18:23 +0100)]
axlepin  break out from filamentspool

7 years agofilamenttrestle wip with spool core circular bar
Ian Jackson [Wed, 17 Oct 2012 17:06:22 +0000 (18:06 +0100)]
filamenttrestle wip  with spool core  circular bar

7 years agoslic3r-config warptest2 shows that higher temps work better
Ian Jackson [Sun, 14 Oct 2012 22:13:44 +0000 (23:13 +0100)]
slic3r-config warptest2 shows that higher temps work better

7 years agoslic3r-config: warptest2 shows decreased nozzle temp hurts not helps
Ian Jackson [Sun, 14 Oct 2012 21:11:45 +0000 (22:11 +0100)]
slic3r-config: warptest2 shows decreased nozzle temp hurts not helps

7 years agowarptest2 before print
Ian Jackson [Sun, 14 Oct 2012 19:27:42 +0000 (20:27 +0100)]
warptest2 before print

7 years agofilamenttrestle turn kit on again
Ian Jackson [Thu, 11 Oct 2012 15:41:30 +0000 (16:41 +0100)]
filamenttrestle turn kit on again

7 years agoslic3r-config set body temp to 190, help prevent warping?
Ian Jackson [Thu, 11 Oct 2012 15:41:12 +0000 (16:41 +0100)]
slic3r-config set body temp to 190, help prevent warping?

7 years agofilamenttrestle adjustments after 1
Ian Jackson [Thu, 11 Oct 2012 15:40:15 +0000 (16:40 +0100)]
filamenttrestle adjustments after 1

7 years agofilamenttrestle define toplevels
Ian Jackson [Thu, 11 Oct 2012 15:00:48 +0000 (16:00 +0100)]
filamenttrestle define toplevels

7 years agopronsolerc work around dodgy temp control by setting ui nozzle temp to 225
Ian Jackson [Thu, 11 Oct 2012 15:00:38 +0000 (16:00 +0100)]
pronsolerc work around dodgy temp control by setting ui nozzle temp to 225

7 years agofilamenttrestle adjust block hole
Ian Jackson [Thu, 11 Oct 2012 00:42:49 +0000 (01:42 +0100)]
filamenttrestle adjust block hole

7 years agofilamenttrestle test kit
Ian Jackson [Thu, 11 Oct 2012 00:42:39 +0000 (01:42 +0100)]
filamenttrestle test kit

7 years agofilamenttrestle triangular pins tuning etc.
Ian Jackson [Thu, 11 Oct 2012 00:34:24 +0000 (01:34 +0100)]
filamenttrestle triangular pins tuning etc.

7 years agofilamenttrestle legw, more tuning
Ian Jackson [Thu, 11 Oct 2012 00:02:27 +0000 (01:02 +0100)]
filamenttrestle legw, more tuning

7 years agofilamenttrestle more tuning
Ian Jackson [Wed, 10 Oct 2012 23:59:30 +0000 (00:59 +0100)]
filamenttrestle more tuning

7 years agofilamenttrestle thicker block
Ian Jackson [Wed, 10 Oct 2012 23:57:00 +0000 (00:57 +0100)]
filamenttrestle thicker block

7 years agofilamenttrestle block side thick right
Ian Jackson [Wed, 10 Oct 2012 23:56:53 +0000 (00:56 +0100)]
filamenttrestle block side thick right

7 years agofilamenttrestle pin holes in right place
Ian Jackson [Wed, 10 Oct 2012 23:56:10 +0000 (00:56 +0100)]
filamenttrestle pin holes in right place

7 years agofilamenttrestle topcyl -> topblock nfc
Ian Jackson [Wed, 10 Oct 2012 23:51:39 +0000 (00:51 +0100)]
filamenttrestle topcyl -> topblock nfc

7 years agofilamenttrestle plug hole height adjust right directions
Ian Jackson [Wed, 10 Oct 2012 23:50:45 +0000 (00:50 +0100)]
filamenttrestle plug hole height adjust right directions

7 years agofilamenttrestle plug hole height adjust right direction?
Ian Jackson [Wed, 10 Oct 2012 23:47:16 +0000 (00:47 +0100)]
filamenttrestle plug hole height adjust right direction?

7 years agofilamenttrestle wip now triangular pins
Ian Jackson [Wed, 10 Oct 2012 23:46:59 +0000 (00:46 +0100)]
filamenttrestle wip now triangular pins

7 years agofilamenttrestle wip square pin holes, before make triangular
Ian Jackson [Wed, 10 Oct 2012 23:31:46 +0000 (00:31 +0100)]
filamenttrestle wip square pin holes, before make triangular

7 years agofilamenttrestle wip square pin holes
Ian Jackson [Wed, 10 Oct 2012 20:47:14 +0000 (21:47 +0100)]
filamenttrestle wip square pin holes

7 years agofilamenttrestle wip pin holes
Ian Jackson [Wed, 10 Oct 2012 20:39:21 +0000 (21:39 +0100)]
filamenttrestle wip pin holes

7 years agoMerge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Wed, 10 Oct 2012 20:23:43 +0000 (21:23 +0100)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play

7 years agoMakefiles etc.: support *.slic3r files and move pawn cooler into it; nfc
Ian Jackson [Wed, 10 Oct 2012 20:18:10 +0000 (21:18 +0100)]
Makefiles etc.: support *.slic3r files and move pawn cooler into it; nfc

7 years agopawn cooler is good, try bigger
Ian Jackson [Sun, 7 Oct 2012 20:54:14 +0000 (21:54 +0100)]
pawn cooler is good, try bigger

7 years agopawn try cooler
Ian Jackson [Sun, 7 Oct 2012 20:25:24 +0000 (21:25 +0100)]
pawn try cooler

7 years agotrailerhubcap for print
Ian Jackson [Sun, 7 Oct 2012 20:01:31 +0000 (21:01 +0100)]
trailerhubcap for print

7 years agofilamenttrestle wip wedges
Ian Jackson [Sun, 7 Oct 2012 19:56:44 +0000 (20:56 +0100)]
filamenttrestle wip wedges

7 years agofilamenttrestle wip before wedges
Ian Jackson [Sun, 7 Oct 2012 19:13:33 +0000 (20:13 +0100)]
filamenttrestle wip before wedges

7 years agofilamenttrestle wip legs basewebs
Ian Jackson [Sun, 7 Oct 2012 16:49:32 +0000 (17:49 +0100)]
filamenttrestle wip legs basewebs

7 years agodoveclip ExtenderPillars optional baseweb
Ian Jackson [Sun, 7 Oct 2012 16:46:51 +0000 (17:46 +0100)]
doveclip ExtenderPillars optional baseweb

7 years agofilamenttrestle wip trestle looks good
Ian Jackson [Sun, 7 Oct 2012 15:35:22 +0000 (16:35 +0100)]
filamenttrestle wip trestle looks good

7 years agofilamenttrestle wip plug fix some dimensions nfc
Ian Jackson [Sun, 7 Oct 2012 15:04:08 +0000 (16:04 +0100)]
filamenttrestle wip plug fix some dimensions nfc

7 years agofilamenttrestle wip plug good
Ian Jackson [Sun, 7 Oct 2012 15:00:54 +0000 (16:00 +0100)]
filamenttrestle wip plug good

7 years agoRevert "filamenttrestle wip use prong, before abandon prong"
Ian Jackson [Sun, 7 Oct 2012 14:30:19 +0000 (15:30 +0100)]
Revert "filamenttrestle wip use prong, before abandon prong"

This reverts commit 6a9d142873c332004002d3f92b36e846b99b4388.

7 years agofilamenttrestle wip use prong, before abandon prong
Ian Jackson [Sun, 7 Oct 2012 14:30:10 +0000 (15:30 +0100)]
filamenttrestle wip use prong, before abandon prong

7 years agofilamenttrestle wip not use doveclip
Ian Jackson [Sun, 7 Oct 2012 14:29:48 +0000 (15:29 +0100)]
filamenttrestle wip not use doveclip