2012-10-21 |
Ian Jackson | xeno-drivebay-bracket measurements of screws etc.
|
commit | commitdiff | tree |
2012-10-21 |
Ian Jackson | Makefile remove %.slic3r dep, fails to cope if missing
|
commit | commitdiff | tree |
2012-10-21 |
Ian Jackson | xeno-drivebay-bracket in Makefile
|
commit | commitdiff | tree |
2012-10-21 |
Ian Jackson | xeno-drivebay-bracket fancy web shape, kit, etc.
|
commit | commitdiff | tree |
2012-10-21 |
Ian Jackson | xeno-drivebay-bracket fancy wall shape
|
commit | commitdiff | tree |
2012-10-21 |
Ian Jackson | xeno-drivebay-bracket before wall polygon
|
commit | commitdiff | tree |
2012-10-21 |
Ian Jackson | xeno-drivebay-bracket wip
|
commit | commitdiff | tree |
2012-10-19 |
Ian Jackson | pawn good slic3r settings for use with glass bed
|
commit | commitdiff | tree |
2012-10-19 |
Ian Jackson | pawn 3 skirts
|
commit | commitdiff | tree |
2012-10-19 |
Ian Jackson | Makefile do dependency for %.slic3r
|
commit | commitdiff | tree |
2012-10-19 |
Ian Jackson | pawn higher temp for glass bed
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle kit for test #5
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle Trestle adjust pin holes #5
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle Trestle adjust pin holes
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle measurements
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle tuning
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle make bar resolution better
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle make hub more plausible
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle make hub more economical
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle make demo toplevel
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle remove demo
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle pinholes really all the way through
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle TestKit improve
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | axlepin provide AxlePin_zoffset
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | Makefile %.auto.{scads,stls} rule
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle extend pin
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle colourful demo
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle HubEnd
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | filamenttrestle HubEnd
|
commit | commitdiff | tree |
2012-10-18 |
Ian Jackson | doveclip break out ExtenderPillar nfc
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle wip HubEnd
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle wip HubEnd
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle pinhole all way through
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle adjustments
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle demo
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | axlepin move pin centre to origin
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle new bar
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle wip pin etc.
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | axlepin break out Washer from filamentspool
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | axlepin break out from filamentspool
|
commit | commitdiff | tree |
2012-10-17 |
Ian Jackson | filamenttrestle wip with spool core circular bar
|
commit | commitdiff | tree |
2012-10-14 |
Ian Jackson | slic3r-config warptest2 shows that higher temps work...
|
commit | commitdiff | tree |
2012-10-14 |
Ian Jackson | slic3r-config: warptest2 shows decreased nozzle temp...
|
commit | commitdiff | tree |
2012-10-14 |
Ian Jackson | warptest2 before print
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | filamenttrestle turn kit on again
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | slic3r-config set body temp to 190, help prevent warping?
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | filamenttrestle adjustments after 1
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | filamenttrestle define toplevels
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | pronsolerc work around dodgy temp control by setting...
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | filamenttrestle adjust block hole
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | filamenttrestle test kit
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | filamenttrestle triangular pins tuning etc.
|
commit | commitdiff | tree |
2012-10-11 |
Ian Jackson | filamenttrestle legw, more tuning
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle more tuning
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle thicker block
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle block side thick right
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle pin holes in right place
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle topcyl -> topblock nfc
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle plug hole height adjust right directions
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle plug hole height adjust right direction?
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle wip now triangular pins
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle wip square pin holes, before make triangular
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle wip square pin holes
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | filamenttrestle wip pin holes
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | Merge branch 'master' of chiark:/u/ianmdlvl/reprap...
|
commit | commitdiff | tree |
2012-10-10 |
Ian Jackson | Makefiles etc.: support *.slic3r files and move pawn...
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | pawn cooler is good, try bigger
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | pawn try cooler
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | trailerhubcap for print
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip wedges
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip before wedges
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip legs basewebs
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | doveclip ExtenderPillars optional baseweb
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip trestle looks good
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip plug fix some dimensions nfc
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip plug good
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | Revert "filamenttrestle wip use prong, before abandon...
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip use prong, before abandon prong
|
commit | commitdiff | tree |
2012-10-07 |
Ian Jackson | filamenttrestle wip not use doveclip
|
commit | commitdiff | tree |
2012-10-06 |
Ian Jackson | filamenttrestle wip before not use doveclip
|
commit | commitdiff | tree |
2012-10-06 |
Ian Jackson | filamenttrestle wip
|
commit | commitdiff | tree |
2012-10-03 |
Ian Jackson | pawn wip work around openscad issue https://github...
|
commit | commitdiff | tree |
2012-10-03 |
Ian Jackson | pawn wip bugfixes
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip introduce d
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip tuning
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip new template
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip tuning
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip fix
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip remove old version
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip
|
commit | commitdiff | tree |
2012-10-02 |
Ian Jackson | pawn wip
|
commit | commitdiff | tree |
2012-09-29 |
Ian Jackson | filament-test 2
|
commit | commitdiff | tree |
2012-09-29 |
Ian Jackson | filament-test
|
commit | commitdiff | tree |
2012-09-23 |
Ian Jackson | firmware rebuilt and reflashed
|
commit | commitdiff | tree |
2012-09-22 |
Ian Jackson | Makefile fix dependency generation after .tmp change
|
commit | commitdiff | tree |
2012-09-20 |
Ian Jackson | slic3r-config use cooling it is good
|
commit | commitdiff | tree |
2012-09-20 |
Ian Jackson | Makefile openscad use .tmp.stl
|
commit | commitdiff | tree |
2012-09-20 |
Ian Jackson | Makefile use PRECIOUS
|
commit | commitdiff | tree |
2012-09-20 |
Ian Jackson | Makefile work in own dir again
|
commit | commitdiff | tree |
next |