chiark / gitweb /
Ian Jackson [Sun, 21 Jan 2018 13:39:51 +0000 (13:39 +0000)]
fairphone-case: adjust button fudge (nfc)
From remeasuring power button.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:38:24 +0000 (13:38 +0000)]
fairphone-case: adjust power button (from v6 with no bumpers)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:30:40 +0000 (13:30 +0000)]
fairphone-case: adjust camera again (from v6 with no bumpers)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:24:11 +0000 (13:24 +0000)]
fairphone-case: switch to no bumpers
And adjust camera_pos_* so the resulting camera pos from the case TR
corner is the same.
This will let us adjust the camera window with a non-rubberised test
piece (v6).
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:22:37 +0000 (13:22 +0000)]
fairphone-case: change some debug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:13:21 +0000 (13:13 +0000)]
fairphone-case: turn "bumpers" into "bumper" and fix off-by- x2 bugs
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:07:05 +0000 (13:07 +0000)]
fairphone-case: add "bumpers" into camera pos (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:03:59 +0000 (13:03 +0000)]
fairphone-case: adjust "bumpers" comment
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:02:55 +0000 (13:02 +0000)]
fairphone-case: introduce "bumpers" (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 12:53:29 +0000 (12:53 +0000)]
fairphone-case: introduce "phone" (nfc)
This is part of letting us separate out rubber bumpers etc., which
change the phone size but also move the features of the phone a bit.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 12:19:08 +0000 (12:19 +0000)]
fairphone-case: fix button cover
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 12:15:03 +0000 (12:15 +0000)]
fairphone-case: refactor tests (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:40:24 +0000 (01:40 +0000)]
fairphone-case: Add TestLidByCameraPrint
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:32:33 +0000 (01:32 +0000)]
fairphone-case: Button cover, fix a bug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:29:25 +0000 (01:29 +0000)]
fairphone-case: Button cover
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:29:14 +0000 (01:29 +0000)]
fairphone-case: Button cover
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:25:25 +0000 (01:25 +0000)]
fairphone-case: move some coord trickery (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:17:33 +0000 (01:17 +0000)]
Revert "fairphone-case: thicker again (from lid test 4)"
this is excessive
This reverts commit
05a844f3521ba8ac26be435bc93d4588cfc71a0c.
Ian Jackson [Sun, 21 Jan 2018 01:15:56 +0000 (01:15 +0000)]
fairphone-case: thicker again (from lid test 4)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:13:20 +0000 (01:13 +0000)]
fairphone-case: Button: fix plan to not leave dangling bits of ledge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 00:24:06 +0000 (00:24 +0000)]
fairphone-case: adjust sizes for inner tube (back to v1 sizes)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 00:07:58 +0000 (00:07 +0000)]
fairphone-case: wip buttons
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:35:27 +0000 (23:35 +0000)]
fairphone-case: Lid: Struts - fix to remove a debugging %
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:35:15 +0000 (23:35 +0000)]
fairphone-case: Lid: whitespace (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:17:42 +0000 (23:17 +0000)]
fairphone-case: Lid: Struts
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:13:14 +0000 (23:13 +0000)]
fairphone-case: Lid: add intersection/union (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:12:47 +0000 (23:12 +0000)]
fairphone-case: Struts: add x_start parameter (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:10:15 +0000 (23:10 +0000)]
fairphone-case: Struts: support negative thickness for inverted objects (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:09:16 +0000 (23:09 +0000)]
fairphone-case: Struts: split up a translate (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:08:24 +0000 (23:08 +0000)]
fairphone-case: fix struts above/below
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 23:07:25 +0000 (23:07 +0000)]
fairphone-case: fix lid thick
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 22:53:32 +0000 (22:53 +0000)]
fairphone-case: break out Struts (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 22:44:14 +0000 (22:44 +0000)]
fairphone-case: adjustments from v2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 22:43:15 +0000 (22:43 +0000)]
fairphone-case: slant keeper
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 22:39:39 +0000 (22:39 +0000)]
fairphone-case: adjust keeper (from v2)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:27:46 +0000 (21:27 +0000)]
fairphone-case: ButtonPlan: fix lengths, with fudge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:21:26 +0000 (21:21 +0000)]
fairphone-case: ButtonPlan: fix whitespace (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:20:26 +0000 (21:20 +0000)]
fairphone-case: ButtonPlan: fix heights
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:17:04 +0000 (21:17 +0000)]
fairphone-case: ButtonPlan: wip fix height
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:13:46 +0000 (21:13 +0000)]
fairphone-case: ButtonPlan: swap args in demo (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:13:11 +0000 (21:13 +0000)]
fairphone-case: ButtonPlan: move bigger and d_D1_y calculations into ButtonPlan (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:09:06 +0000 (21:09 +0000)]
fairphone-case: ButtonPlan new approach
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 21:03:14 +0000 (21:03 +0000)]
fairphone-case: wip ButtonPlan, needs new approach
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 20:12:04 +0000 (20:12 +0000)]
fairphone-case: wip ButtonPlan
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 20:08:38 +0000 (20:08 +0000)]
fairphone-case: wip ButtonPlan
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 19:57:02 +0000 (19:57 +0000)]
fairphone-case: wip ButtonPlan
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 19:00:34 +0000 (19:00 +0000)]
fairphone-case: add TestLidWidthPrint
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:55:07 +0000 (18:55 +0000)]
fairphone-case: struts adj from cura
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:50:06 +0000 (18:50 +0000)]
fairphone-case: wip struts to strengthen
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:38:26 +0000 (18:38 +0000)]
fairphone-case: strengthen bottom edge (from v1)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:34:36 +0000 (18:34 +0000)]
fairphone-case: strengthen (from v1)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:28:44 +0000 (18:28 +0000)]
fairphone-case: cnr rad bigger from v1
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:18:10 +0000 (18:18 +0000)]
fairphone-case: optimise one keeper (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:12:59 +0000 (18:12 +0000)]
fairphone-case: one keeper
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 18:02:49 +0000 (18:02 +0000)]
fairphone-case: keeper slot adj from v1
The keeper is specified to be symmetrical (ie, left and right keepers
are the same) but actually it prints quite asymmetrically. The
squishing on the printbed mades one of the ledges much deeper, and it
now only fits one way!
We probably don't want to try compensating for this in the keeper
shape. Instead, add some more slop in a place which is basically
harmless.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 17:51:23 +0000 (17:51 +0000)]
fairphone-case: camera adj from v1
feeler gauge says 115 * 10um
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 17:44:41 +0000 (17:44 +0000)]
fairphone-case: camera adj from v1
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 01:16:52 +0000 (01:16 +0000)]
fairphone-case: Lid
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 01:04:36 +0000 (01:04 +0000)]
fairphone-case: introduce AroundEdges (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 01:00:53 +0000 (01:00 +0000)]
fairphone-case: slight optimisation
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 01:00:48 +0000 (01:00 +0000)]
fairphone-case: LidEdge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 00:49:07 +0000 (00:49 +0000)]
fairphone-case: Makefile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 00:26:24 +0000 (00:26 +0000)]
fairphone-case: TestCamera
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sat, 20 Jan 2018 00:19:31 +0000 (00:19 +0000)]
fairphone-case: some toplevels etc.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 23:50:05 +0000 (23:50 +0000)]
fairphone-case: keeper with holes
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 23:24:05 +0000 (23:24 +0000)]
fairphone-case: keeper
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 23:12:06 +0000 (23:12 +0000)]
fairphone-case: wip new slide lock thing
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 22:40:56 +0000 (22:40 +0000)]
fairphone-case: all way round, before new slide lock thing
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 21:22:32 +0000 (21:22 +0000)]
fairphone-case: refactor to put loops inside flips (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 21:21:13 +0000 (21:21 +0000)]
fairphone-case: fix CodeBase_*flip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 21:16:14 +0000 (21:16 +0000)]
fairphone-case: refactor a bit (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 21:13:15 +0000 (21:13 +0000)]
fairphone-case: introduce CaseBase_rhsflip (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 21:10:33 +0000 (21:10 +0000)]
fairphone-case: wip, have top and sides
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 21:05:28 +0000 (21:05 +0000)]
fairphone-case: wip, have edges
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 20:45:18 +0000 (20:45 +0000)]
fairphone-case: wip, have EdgeProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Fri, 19 Jan 2018 19:56:05 +0000 (19:56 +0000)]
fairphone-case: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 7 Jan 2018 23:05:50 +0000 (23:05 +0000)]
distort-stl: seems to work now
Ian Jackson [Sun, 7 Jan 2018 22:57:21 +0000 (22:57 +0000)]
distort-stl: better, but still needs work
Ian Jackson [Sun, 7 Jan 2018 22:40:53 +0000 (22:40 +0000)]
distort-stl: fix output
Ian Jackson [Sun, 7 Jan 2018 22:37:03 +0000 (22:37 +0000)]
distort-stl: raw mode
Ian Jackson [Sun, 7 Jan 2018 22:24:37 +0000 (22:24 +0000)]
distort-stl: new approach, wip fixes
Ian Jackson [Sun, 7 Jan 2018 21:44:52 +0000 (21:44 +0000)]
distort-stl: new approach
Ian Jackson [Sun, 7 Jan 2018 20:21:44 +0000 (20:21 +0000)]
distort-stl: works now but needs to do something about lines
Ian Jackson [Sun, 7 Jan 2018 20:14:43 +0000 (20:14 +0000)]
distort-stl: seems to handle pipes etc.
Ian Jackson [Sun, 7 Jan 2018 19:59:16 +0000 (19:59 +0000)]
distort-stl: wip, does not work because admesh
Ian Jackson [Fri, 22 Dec 2017 00:46:14 +0000 (00:46 +0000)]
Huxley-INSTRUCTIONS
Ian Jackson [Fri, 20 Oct 2017 22:42:45 +0000 (23:42 +0100)]
poster-tube-lid: add -parametric.scad to .gitignore
Ian Jackson [Fri, 20 Oct 2017 22:36:43 +0000 (23:36 +0100)]
poster-tube-lid: ImplHeadCup debugging
Ian Jackson [Fri, 20 Oct 2017 22:36:15 +0000 (23:36 +0100)]
poster-tube-lid: ImplHeadCup debugging
Ian Jackson [Fri, 20 Oct 2017 22:36:05 +0000 (23:36 +0100)]
poster-tube-lid: minor edit to ImplHeadCup
Ian Jackson [Fri, 20 Oct 2017 22:35:55 +0000 (23:35 +0100)]
poster-tube-lid: fix ImplHeadCup
Ian Jackson [Fri, 20 Oct 2017 21:36:37 +0000 (22:36 +0100)]
poster-tube-lid: tuning ImplHeadCup
Ian Jackson [Fri, 20 Oct 2017 21:36:13 +0000 (22:36 +0100)]
poster-tube-lid: new shape, fix balls
Ian Jackson [Fri, 20 Oct 2017 21:24:56 +0000 (22:24 +0100)]
poster-tube-lid: wip new shape (unfinished, ball[02] is wrong)
Ian Jackson [Fri, 20 Oct 2017 20:56:57 +0000 (21:56 +0100)]
poster-tube-lid: wip parametric integration
Ian Jackson [Fri, 20 Oct 2017 19:43:22 +0000 (20:43 +0100)]
poster-tube-lid: wip parametric integration, rework
Ian Jackson [Fri, 20 Oct 2017 19:39:00 +0000 (20:39 +0100)]
poster-tube-lid: wip parametric integration, rework
Ian Jackson [Fri, 20 Oct 2017 19:26:48 +0000 (20:26 +0100)]
poster-tube-lid: wip parametric integration
Ian Jackson [Fri, 20 Oct 2017 19:12:06 +0000 (20:12 +0100)]
poster-tube-lid-parametric: drop a debugging thing which looks odd
Ian Jackson [Fri, 20 Oct 2017 19:11:55 +0000 (20:11 +0100)]
poster-tube-lid-parametric: incorporate, fix Makefiles, etc.
~ianmdlvl / reprap-play.git / log