fairphone-case: switch to no bumpers

And adjust camera_pos_* so the resulting camera pos from the case TR
corner is the same.

This will let us adjust the camera window with a non-rubberised test
piece (v6).

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

diff --git a/fairphone-case.scad b/fairphone-case.scad
index 77d81ae9715b0a1125600b8381e47d09d729d62c..0b6df0ec1f72332ddc93bcc539dbb6024920146b 100644 (file)
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -2,7 +2,7 @@
 
 phone = [ 145.0, 75.0 ];
 
-bumper = [ 0.750, 0.875 ];
+bumper = [ 0.250, 0.250 ];
 // ^ One side.  Overall size is increased by twice this.
 // If no bumpers, is the gap around the phone.
 
@@ -15,8 +15,8 @@ phone_total_thick = 12.0;
 phone_backside_slope_inner = 1.5; // larger means shallower
 phone_backside_slope_outer = 1.0; // larger means shallower
 
-camera_pos_tl = [  6.250, 12.125 ]; // measured from tl corner
-camera_pos_br = [ 22.10,  36.975 ]; // tl/br as seen from back
+camera_pos_tl = [  6.750, 12.750 ]; // measured from tl corner
+camera_pos_br = [ 22.600, 37.600 ]; // tl/br as seen from back
 
 case_th_bottom = 2.5;
 case_th_lid = 2.5;