chiark / gitweb /
reprap-play.git
9 years agoincrease 1st layer bed temp., as we are printing now (well at first it was 65 for...
Ian Jackson [Tue, 14 Aug 2012 00:49:21 +0000 (01:49 +0100)]
increase 1st layer bed temp., as we are printing now (well at first it was 65 for a bit in the actual gcode, set manually to 70)

9 years agodovetailtest as just printed
Ian Jackson [Mon, 13 Aug 2012 23:18:15 +0000 (00:18 +0100)]
dovetailtest as just printed

9 years agogo back to slic3r in pronsolerc
Ian Jackson [Mon, 13 Aug 2012 22:56:39 +0000 (23:56 +0100)]
go back to slic3r in pronsolerc

9 years agoconfigs: better bed temp, seems to have done away with warping in warptest
Ian Jackson [Mon, 13 Aug 2012 22:40:38 +0000 (23:40 +0100)]
configs: better bed temp, seems to have done away with warping in warptest

9 years agowip warp test - try higher bed temp
Ian Jackson [Mon, 13 Aug 2012 01:12:34 +0000 (02:12 +0100)]
wip warp test - try higher bed temp

9 years agogo back to slic3r since skeinforge still unconvincing
Ian Jackson [Mon, 13 Aug 2012 00:32:03 +0000 (01:32 +0100)]
go back to slic3r since skeinforge still unconvincing

9 years agowip trying skeinforge again, more
Ian Jackson [Mon, 13 Aug 2012 00:14:01 +0000 (01:14 +0100)]
wip trying skeinforge again, more

9 years agowip trying skeinforge again
Ian Jackson [Sun, 12 Aug 2012 23:50:38 +0000 (00:50 +0100)]
wip trying skeinforge again

9 years agosize-tests: as just printed, extrusion rate tests
Ian Jackson [Sun, 12 Aug 2012 22:45:28 +0000 (23:45 +0100)]
size-tests: as just printed, extrusion rate tests

9 years agosize-tests: break out size_tests
Ian Jackson [Sun, 12 Aug 2012 22:11:24 +0000 (23:11 +0100)]
size-tests: break out size_tests

9 years agosize-tests: break out org_oblong
Ian Jackson [Sun, 12 Aug 2012 22:10:41 +0000 (23:10 +0100)]
size-tests: break out org_oblong

9 years agocalib-fit: regen with different settings, still comes out off
Ian Jackson [Sun, 12 Aug 2012 22:08:09 +0000 (23:08 +0100)]
calib-fit: regen with different settings, still comes out off

9 years agoslic3r: better epilogue
Ian Jackson [Sun, 12 Aug 2012 22:03:29 +0000 (23:03 +0100)]
slic3r: better epilogue

9 years agoslic3r: play with nozzle dia
Ian Jackson [Sun, 12 Aug 2012 22:02:45 +0000 (23:02 +0100)]
slic3r: play with nozzle dia

9 years agoconfig, calib-fit: 1 perimiter only
Ian Jackson [Sun, 12 Aug 2012 21:22:45 +0000 (22:22 +0100)]
config, calib-fit: 1 perimiter only

9 years agosize-test: squash down by 0.1mm to aid adhesion
Ian Jackson [Sun, 12 Aug 2012 21:19:56 +0000 (22:19 +0100)]
size-test: squash down by 0.1mm to aid adhesion

9 years agosize-test: remove edge ticks; our printer is printing in right places
Ian Jackson [Sun, 12 Aug 2012 21:19:41 +0000 (22:19 +0100)]
size-test: remove edge ticks; our printer is printing in right places

9 years agosize-test: calib-fit.gcode as uses as a basis
Ian Jackson [Sun, 12 Aug 2012 21:18:31 +0000 (22:18 +0100)]
size-test: calib-fit.gcode as uses as a basis

9 years agosize-test: test objects as printing just now
Ian Jackson [Sun, 12 Aug 2012 19:48:53 +0000 (20:48 +0100)]
size-test: test objects as printing just now

9 years agosize-test: test objects
Ian Jackson [Sun, 12 Aug 2012 19:43:30 +0000 (20:43 +0100)]
size-test: test objects

9 years agomanual-gcode-generator: perl-mode fix
Ian Jackson [Sun, 12 Aug 2012 19:43:18 +0000 (20:43 +0100)]
manual-gcode-generator: perl-mode fix

9 years agomanual-gcode-generator: allow ws before !; support orgx/orgy
Ian Jackson [Sun, 12 Aug 2012 19:43:04 +0000 (20:43 +0100)]
manual-gcode-generator: allow ws before !; support orgx/orgy

9 years agosize-tests - before coord adjusts
Ian Jackson [Sun, 12 Aug 2012 19:20:09 +0000 (20:20 +0100)]
size-tests - before coord adjusts

9 years agosize-tests - wip - printed, looks good
Ian Jackson [Sun, 12 Aug 2012 17:58:14 +0000 (18:58 +0100)]
size-tests - wip - printed, looks good

9 years agosize-tests - wip - printed, fix up final thing
Ian Jackson [Sun, 12 Aug 2012 17:49:40 +0000 (18:49 +0100)]
size-tests - wip - printed, fix up final thing

9 years agosize-tests - wip - size tests initial version ready for test
Ian Jackson [Sun, 12 Aug 2012 16:50:04 +0000 (17:50 +0100)]
size-tests - wip - size tests initial version ready for test

9 years agosize-tests - wip - movement generator in separate file
Ian Jackson [Sun, 12 Aug 2012 16:48:35 +0000 (17:48 +0100)]
size-tests - wip - movement generator in separate file

9 years agosize-tests - wip - movement generator produces layers
Ian Jackson [Sun, 12 Aug 2012 16:45:40 +0000 (17:45 +0100)]
size-tests - wip - movement generator produces layers

9 years agosize-tests - wip - movement generator seems to work and can generate a drawing
Ian Jackson [Sun, 12 Aug 2012 16:25:10 +0000 (17:25 +0100)]
size-tests - wip - movement generator seems to work and can generate a drawing

9 years agosize-tests - wip - movement generator seems to work a bit
Ian Jackson [Sun, 12 Aug 2012 16:12:15 +0000 (17:12 +0100)]
size-tests - wip - movement generator seems to work a bit

9 years agosize-tests - wip - movement generator
Ian Jackson [Sun, 12 Aug 2012 15:21:30 +0000 (16:21 +0100)]
size-tests - wip - movement generator

9 years agosize-tests - wip - some notes on some commands found in the file
Ian Jackson [Sun, 12 Aug 2012 15:21:19 +0000 (16:21 +0100)]
size-tests - wip - some notes on some commands found in the file

9 years agosize-tests - wip
Ian Jackson [Sun, 12 Aug 2012 13:00:09 +0000 (14:00 +0100)]
size-tests - wip

9 years agosize-tests - rename, for manual processing
Ian Jackson [Sun, 12 Aug 2012 12:59:59 +0000 (13:59 +0100)]
size-tests - rename, for manual processing

9 years agosize-tests: start with a copy of calib-fit.gcode
Ian Jackson [Sun, 12 Aug 2012 12:49:29 +0000 (13:49 +0100)]
size-tests: start with a copy of calib-fit.gcode

9 years agowarp test file, not yet printed
Ian Jackson [Sat, 11 Aug 2012 00:14:56 +0000 (01:14 +0100)]
warp test file, not yet printed

9 years agobump temperature to 215/210 as that sticks better on first layer
Ian Jackson [Fri, 10 Aug 2012 23:43:17 +0000 (00:43 +0100)]
bump temperature to 215/210 as that sticks better on first layer

9 years agoslic3r tuning: produces better output but hole is much too small
Ian Jackson [Fri, 10 Aug 2012 22:56:51 +0000 (23:56 +0100)]
slic3r tuning: produces better output but hole is much too small

9 years agoslic3r: wip better config, nozzle dia, etc.
Ian Jackson [Fri, 10 Aug 2012 22:16:59 +0000 (23:16 +0100)]
slic3r: wip better config, nozzle dia, etc.

9 years agocalib-fit: as just printed
Ian Jackson [Fri, 10 Aug 2012 19:32:59 +0000 (20:32 +0100)]
calib-fit: as just printed

9 years agoslic3r with z offset
Ian Jackson [Fri, 10 Aug 2012 19:26:09 +0000 (20:26 +0100)]
slic3r with z offset

9 years agokeep some of our own settings
Ian Jackson [Fri, 10 Aug 2012 19:24:06 +0000 (20:24 +0100)]
keep some of our own settings

9 years agoslic3r defaults
Ian Jackson [Fri, 10 Aug 2012 19:21:01 +0000 (20:21 +0100)]
slic3r defaults

9 years agoback to play directory
Ian Jackson [Fri, 10 Aug 2012 19:16:21 +0000 (20:16 +0100)]
back to play directory

9 years agofirmware loaded and tested firmware-tested-2012-08-10
Ian Jackson [Fri, 10 Aug 2012 18:33:58 +0000 (19:33 +0100)]
firmware loaded and tested

9 years agoslic3r-config: put skirts back
Ian Jackson [Fri, 10 Aug 2012 15:30:45 +0000 (16:30 +0100)]
slic3r-config: put skirts back

9 years agocalib-fit for debug slic3r
Ian Jackson [Fri, 10 Aug 2012 15:30:10 +0000 (16:30 +0100)]
calib-fit for debug slic3r

9 years agoMakefile: better handling of slic3r config
Ian Jackson [Fri, 10 Aug 2012 15:29:39 +0000 (16:29 +0100)]
Makefile: better handling of slic3r config

9 years agowrite-firmware
Ian Jackson [Thu, 9 Aug 2012 19:06:54 +0000 (20:06 +0100)]
write-firmware

9 years agosave firmware we loaded and tested firmware-tested-2012-08-04
Ian Jackson [Sat, 4 Aug 2012 18:26:33 +0000 (19:26 +0100)]
save firmware we loaded and tested

9 years agocalib-fit: initial test objects
Ian Jackson [Thu, 2 Aug 2012 17:36:03 +0000 (18:36 +0100)]
calib-fit: initial test objects

9 years agoMakefile for noninteractive processing
Ian Jackson [Thu, 2 Aug 2012 17:35:26 +0000 (18:35 +0100)]
Makefile for noninteractive processing

9 years agoas for brackets 2012-08-01
Ian Jackson [Thu, 2 Aug 2012 00:43:53 +0000 (01:43 +0100)]
as for brackets 2012-08-01

9 years agofor thin wall box 5573 as printed
Ian Jackson [Tue, 31 Jul 2012 23:49:10 +0000 (00:49 +0100)]
for thin wall box 5573 as printed

9 years agobiscuits as printed
Ian Jackson [Tue, 31 Jul 2012 23:48:47 +0000 (00:48 +0100)]
biscuits as printed

9 years agobiscuits as printed
Ian Jackson [Tue, 31 Jul 2012 23:48:22 +0000 (00:48 +0100)]
biscuits as printed

9 years agorefactor parameters, no functional change, really
Ian Jackson [Tue, 31 Jul 2012 22:27:43 +0000 (23:27 +0100)]
refactor parameters, no functional change, really

9 years agorefactor parameters, no functional change
Ian Jackson [Tue, 31 Jul 2012 22:26:35 +0000 (23:26 +0100)]
refactor parameters, no functional change

9 years agoadjustments vefore resize
Ian Jackson [Tue, 31 Jul 2012 22:24:07 +0000 (23:24 +0100)]
adjustments vefore resize

9 years agobefore test print
Ian Jackson [Tue, 31 Jul 2012 21:39:44 +0000 (22:39 +0100)]
before test print

9 years agobefore THE HOLLOWING woooooo
Ian Jackson [Tue, 31 Jul 2012 21:29:35 +0000 (22:29 +0100)]
before THE HOLLOWING woooooo

9 years agorestore skirt distance
Ian Jackson [Tue, 31 Jul 2012 00:13:51 +0000 (01:13 +0100)]
restore skirt distance

9 years agobracket as printed - NB changed bed temperature and skirt margin too
Ian Jackson [Tue, 31 Jul 2012 00:12:06 +0000 (01:12 +0100)]
bracket as printed - NB changed bed temperature and skirt margin too

9 years agore repsnapper
Ian Jackson [Sun, 29 Jul 2012 23:59:05 +0000 (00:59 +0100)]
re repsnapper

9 years agosome more notes iwj-success-2012-07-29
Ian Jackson [Sun, 29 Jul 2012 19:14:01 +0000 (20:14 +0100)]
some more notes

9 years agosome more notes
Ian Jackson [Sun, 29 Jul 2012 19:12:15 +0000 (20:12 +0100)]
some more notes

9 years agosome more notes
Ian Jackson [Sun, 29 Jul 2012 19:11:53 +0000 (20:11 +0100)]
some more notes

9 years agouse /home/reprap
Ian Jackson [Sun, 29 Jul 2012 19:03:06 +0000 (20:03 +0100)]
use /home/reprap

9 years agosome notes on how to print
Ian Jackson [Sun, 29 Jul 2012 18:59:24 +0000 (19:59 +0100)]
some notes on how to print

9 years agoas printed today
Ian Jackson [Sun, 29 Jul 2012 16:48:19 +0000 (17:48 +0100)]
as printed today

9 years agoRevert "light-bracket: a bit of debug"
Ian Jackson [Sun, 29 Jul 2012 16:40:30 +0000 (17:40 +0100)]
Revert "light-bracket: a bit of debug"

this makes a bogus object

This reverts commit a009a85efa6b31f6e3cf58b8acf5344b208f6dfd.

9 years agosize adjustments
Ian Jackson [Sun, 29 Jul 2012 16:40:06 +0000 (17:40 +0100)]
size adjustments

9 years agosettings for today's prints so far
Ian Jackson [Sun, 29 Jul 2012 16:34:46 +0000 (17:34 +0100)]
settings for today's prints so far

9 years agoas programmed just now
Ian Jackson [Sun, 29 Jul 2012 15:25:57 +0000 (15:25 +0000)]
as programmed just now
avrdude -b 38400 -v -P /dev/ttyUSB0 -p atmega644P -c arduino -U flash:w:Marlin.hex

9 years agofirmware as read out of our chip
Ian Jackson [Sat, 28 Jul 2012 17:41:32 +0000 (17:41 +0000)]
firmware as read out of our chip

9 years agoexperimental slic3r prefix
Ian Jackson [Wed, 25 Jul 2012 21:25:27 +0000 (22:25 +0100)]
experimental slic3r prefix

9 years agolight-bracket: as 2nd test print, with weird rectangular moves
Ian Jackson [Wed, 25 Jul 2012 21:19:20 +0000 (22:19 +0100)]
light-bracket: as 2nd test print, with weird rectangular moves

9 years agolight-bracket: a bit of debug
Ian Jackson [Wed, 25 Jul 2012 21:18:41 +0000 (22:18 +0100)]
light-bracket: a bit of debug

9 years agolight-bracket: only bracket
Ian Jackson [Wed, 25 Jul 2012 21:17:47 +0000 (22:17 +0100)]
light-bracket: only bracket

9 years agoconfig: fix comment
Ian Jackson [Sun, 22 Jul 2012 18:41:23 +0000 (19:41 +0100)]
config: fix comment

9 years agolight bracket: other section
Ian Jackson [Sun, 22 Jul 2012 18:16:49 +0000 (19:16 +0100)]
light bracket: other section

9 years agoslic3r-config.ini is here
Ian Jackson [Sun, 22 Jul 2012 18:16:32 +0000 (19:16 +0100)]
slic3r-config.ini is here

9 years agoconfig files which seem to work
Ian Jackson [Sun, 22 Jul 2012 18:12:42 +0000 (19:12 +0100)]
config files which seem to work

9 years agolight bracket: sloping hooks
Ian Jackson [Sun, 22 Jul 2012 16:59:02 +0000 (17:59 +0100)]
light bracket: sloping hooks

9 years agolight bracket: fewer slashes
Ian Jackson [Sun, 22 Jul 2012 16:44:34 +0000 (17:44 +0100)]
light bracket: fewer slashes

9 years agolight bracket: countersunk holes, better base, etc.
Ian Jackson [Sun, 22 Jul 2012 16:42:05 +0000 (17:42 +0100)]
light bracket: countersunk holes, better base, etc.

9 years agolight bracket: dimensional adjustments
Ian Jackson [Sun, 22 Jul 2012 16:27:47 +0000 (17:27 +0100)]
light bracket: dimensional adjustments

9 years agolight bracket: whole object
Ian Jackson [Sun, 22 Jul 2012 16:14:20 +0000 (17:14 +0100)]
light bracket: whole object

9 years agomore ignores
Ian Jackson [Sun, 22 Jul 2012 16:13:55 +0000 (17:13 +0100)]
more ignores

9 years agostart_PLA.gcode change temp
Ian Jackson [Tue, 3 Jul 2012 01:42:16 +0000 (02:42 +0100)]
start_PLA.gcode change temp

9 years agostart_PLA.gcode from pronterface 94039c103547c99c4b9bcb00a171507449e0f50c
Ian Jackson [Tue, 3 Jul 2012 01:42:00 +0000 (02:42 +0100)]
start_PLA.gcode from pronterface 94039c103547c99c4b9bcb00a171507449e0f50c

9 years agolight-bracket: stub for test
Ian Jackson [Tue, 3 Jul 2012 01:08:13 +0000 (02:08 +0100)]
light-bracket: stub for test

9 years agolight-bracket: looks good, made bracket()
Ian Jackson [Tue, 3 Jul 2012 01:04:36 +0000 (02:04 +0100)]
light-bracket: looks good, made bracket()

9 years agolight-bracket: wip, finished?
Ian Jackson [Tue, 3 Jul 2012 01:00:00 +0000 (02:00 +0100)]
light-bracket: wip, finished?

9 years agolight-bracket: wip hollow base
Ian Jackson [Tue, 3 Jul 2012 00:53:23 +0000 (01:53 +0100)]
light-bracket: wip hollow base

9 years agolight-bracket: wip, new base
Ian Jackson [Tue, 3 Jul 2012 00:47:04 +0000 (01:47 +0100)]
light-bracket: wip, new base

9 years agolight-bracket: wip, screw_ys
Ian Jackson [Tue, 3 Jul 2012 00:44:36 +0000 (01:44 +0100)]
light-bracket: wip, screw_ys

9 years agolight-bracket: wip, has holes
Ian Jackson [Tue, 3 Jul 2012 00:37:40 +0000 (01:37 +0100)]
light-bracket: wip, has holes

9 years agolight-bracket: wip, has base
Ian Jackson [Tue, 3 Jul 2012 00:29:44 +0000 (01:29 +0100)]
light-bracket: wip, has base

9 years agolight-bracket: wip, many hooks
Ian Jackson [Tue, 3 Jul 2012 00:24:46 +0000 (01:24 +0100)]
light-bracket: wip, many hooks