bump temperature to 215/210 as that sticks better on first layer

diff --git a/pronsolerc b/pronsolerc
index bcccf23c321859f8d2dbbeeb27bc3bc0b31e69a0..0f5b4926b499717de92362c40cd63305dba67a8e 100644 (file)
--- a/pronsolerc
+++ b/pronsolerc
@@ -1,5 +1,5 @@
 set port /dev/ttyUSB0
-set last_temperature 195.0
+set last_temperature 216.0
 
 button 3 "FAN ON" /c "#C8C8C8" M106 S200
 button 4 "GET POS" /c "#C8C8C8" M114

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 541e48a0644e133e59bb7f503eb56632e9247bc1..b45661c03fadfc9f503786364c8fcd2c97fd9e59 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.1 on Sat Aug 11 00:01:02 2012
+# generated by Slic3r 0.9.1 on Sat Aug 11 00:02:11 2012
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60
@@ -31,7 +31,7 @@ first_layer_bed_temperature = 65
 first_layer_extrusion_width = 150%
 first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 195
+first_layer_temperature = 215
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 190
+temperature = 210
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130