chiark / gitweb /
reprap-play.git
6 years agoslic3r-config: as sgt's GB printed, sliced on anarres
Ian Jackson [Thu, 14 Feb 2013 20:08:29 +0000 (20:08 +0000)]
slic3r-config: as sgt's GB printed, sliced on anarres

6 years agoRevert "slic3r-config: sgtatham's great-britain as printed in green successfully"
Ian Jackson [Tue, 22 Jan 2013 02:24:52 +0000 (02:24 +0000)]
Revert "slic3r-config: sgtatham's great-britain as printed in green successfully"

This reverts commit 4b1733346ad41daa4761b94d5c212c40fde97da9.

6 years agoslic3r-config: sgtatham's great-britain as printed in green successfully
Ian Jackson [Tue, 22 Jan 2013 02:24:32 +0000 (02:24 +0000)]
slic3r-config: sgtatham's great-britain as printed in green successfully

6 years agocable-hole-trunking-cover: provide BaseCNone
Ian Jackson [Mon, 17 Dec 2012 00:35:52 +0000 (00:35 +0000)]
cable-hole-trunking-cover: provide BaseCNone

6 years agocable-hole-trunking-cover: as printed
Ian Jackson [Mon, 17 Dec 2012 00:37:31 +0000 (00:37 +0000)]
cable-hole-trunking-cover: as printed

6 years agopronsolerc: increase bed temp to 90
Ian Jackson [Mon, 17 Dec 2012 00:36:46 +0000 (00:36 +0000)]
pronsolerc: increase bed temp to 90

6 years agocable-hole-trunking-cover: actual sizes for edges
Ian Jackson [Sun, 16 Dec 2012 22:56:33 +0000 (22:56 +0000)]
cable-hole-trunking-cover: actual sizes for edges

6 years agocable-hole-trunking-cover: actual sizes, apart from edges
Ian Jackson [Sun, 16 Dec 2012 22:38:46 +0000 (22:38 +0000)]
cable-hole-trunking-cover: actual sizes, apart from edges

6 years agocable-hole-trunking-cover: note re checking some parameters
Ian Jackson [Sun, 16 Dec 2012 20:48:19 +0000 (20:48 +0000)]
cable-hole-trunking-cover: note re checking some parameters

6 years agoslic3r-config: increase bed temps again
Ian Jackson [Sun, 16 Dec 2012 20:42:55 +0000 (20:42 +0000)]
slic3r-config: increase bed temps again

6 years agocable-hole-trunking-cover: specify bevelz in terms of bevely, adjust
Ian Jackson [Sun, 16 Dec 2012 20:33:57 +0000 (20:33 +0000)]
cable-hole-trunking-cover: specify bevelz in terms of bevely, adjust

6 years agocable-hole-trunking-cover: separate basebevelt
Ian Jackson [Sun, 16 Dec 2012 20:32:00 +0000 (20:32 +0000)]
cable-hole-trunking-cover: separate basebevelt

6 years agocable-hole-trunking-cover: demo
Ian Jackson [Sun, 16 Dec 2012 20:28:47 +0000 (20:28 +0000)]
cable-hole-trunking-cover: demo

6 years agocable-hole-trunking-cover: thinner walls
Ian Jackson [Sun, 16 Dec 2012 20:28:08 +0000 (20:28 +0000)]
cable-hole-trunking-cover: thinner walls

6 years agocable-hole-trunking-cover: sides using polygon
Ian Jackson [Sun, 16 Dec 2012 20:27:57 +0000 (20:27 +0000)]
cable-hole-trunking-cover: sides using polygon

6 years agocable-hole-trunking-cover: add to Makefile
Ian Jackson [Sun, 16 Dec 2012 20:08:47 +0000 (20:08 +0000)]
cable-hole-trunking-cover: add to Makefile

6 years agocable-hole-trunking-cover: BaseCBot too
Ian Jackson [Sun, 16 Dec 2012 20:00:23 +0000 (20:00 +0000)]
cable-hole-trunking-cover: BaseCBot too

6 years agocable-hole-trunking-cover: nearly done?
Ian Jackson [Sun, 16 Dec 2012 19:58:56 +0000 (19:58 +0000)]
cable-hole-trunking-cover: nearly done?

6 years agocable-hole-trunking-cover: break back wall out properly, nfc
Ian Jackson [Sun, 16 Dec 2012 19:45:35 +0000 (19:45 +0000)]
cable-hole-trunking-cover: break back wall out properly, nfc

6 years agocable-hole-trunking-cover: break back wall out, nfc
Ian Jackson [Sun, 16 Dec 2012 19:36:09 +0000 (19:36 +0000)]
cable-hole-trunking-cover: break back wall out, nfc

6 years agocable-hole-trunking-cover: lid done
Ian Jackson [Sun, 16 Dec 2012 19:05:38 +0000 (19:05 +0000)]
cable-hole-trunking-cover: lid done

6 years agocable-hole-trunking-cover: wip lid
Ian Jackson [Sun, 16 Dec 2012 18:59:29 +0000 (18:59 +0000)]
cable-hole-trunking-cover: wip lid

6 years agocable-hole-trunking-cover: mirror the sides
Ian Jackson [Sun, 16 Dec 2012 18:51:36 +0000 (18:51 +0000)]
cable-hole-trunking-cover: mirror the sides

6 years agocable-hole-trunking-cover: wip, before mirroring
Ian Jackson [Sun, 16 Dec 2012 18:47:16 +0000 (18:47 +0000)]
cable-hole-trunking-cover: wip, before mirroring

6 years agocable-hole-trunking-cover: wip, hole
Ian Jackson [Sun, 16 Dec 2012 18:36:46 +0000 (18:36 +0000)]
cable-hole-trunking-cover: wip, hole

6 years agocable-hole-trunking-cover: wip, base
Ian Jackson [Sun, 16 Dec 2012 18:33:38 +0000 (18:33 +0000)]
cable-hole-trunking-cover: wip, base

6 years agocable-hole-trunking-cover: wip, sheared_cube seems to work
Ian Jackson [Sun, 16 Dec 2012 18:28:46 +0000 (18:28 +0000)]
cable-hole-trunking-cover: wip, sheared_cube seems to work

6 years agoslic3r-config: turn perimiters up to 2 - why was it 1 ?
Ian Jackson [Mon, 3 Dec 2012 01:49:53 +0000 (01:49 +0000)]
slic3r-config: turn perimiters up to 2 - why was it 1 ?

6 years agoanke-gps-bracket: NestleCube: visible arches
Ian Jackson [Mon, 3 Dec 2012 00:35:30 +0000 (00:35 +0000)]
anke-gps-bracket: NestleCube: visible arches

6 years agoanke-gps-bracket: NestleCube: provide nestlearchslope parameter
Ian Jackson [Mon, 3 Dec 2012 00:35:18 +0000 (00:35 +0000)]
anke-gps-bracket: NestleCube: provide nestlearchslope parameter

6 years agoRevert "anke-gps-bracket: NestleCube: experimental version which requires support...
Ian Jackson [Mon, 3 Dec 2012 00:19:09 +0000 (00:19 +0000)]
Revert "anke-gps-bracket: NestleCube: experimental version which requires support material"

This reverts commit c23051a7db9b2a275f8377538382ca8b311f5edf.

6 years agoanke-gps-bracket: NestleCube: experimental version which requires support material
Ian Jackson [Mon, 3 Dec 2012 00:19:02 +0000 (00:19 +0000)]
anke-gps-bracket: NestleCube: experimental version which requires support material

6 years agoanke-gps-bracket: NestleCube: adjustments for base
Ian Jackson [Mon, 3 Dec 2012 00:13:00 +0000 (00:13 +0000)]
anke-gps-bracket: NestleCube: adjustments for base

6 years agoanke-gps-bracket: NestleCube: fold in some arithmetic, nfc
Ian Jackson [Sun, 2 Dec 2012 23:51:59 +0000 (23:51 +0000)]
anke-gps-bracket: NestleCube: fold in some arithmetic, nfc

6 years agoanke-gps-bracket: NestleCube: undo ill-considered dimensional changes
Ian Jackson [Sun, 2 Dec 2012 23:49:12 +0000 (23:49 +0000)]
anke-gps-bracket: NestleCube: undo ill-considered dimensional changes

I suspect NestleCubeBaseTest 1 wasn't actually printed like that either

6 years agoanke-gps-bracket: NestleCube: echo some dimensions
Ian Jackson [Sun, 2 Dec 2012 23:47:03 +0000 (23:47 +0000)]
anke-gps-bracket: NestleCube: echo some dimensions

6 years agoanke-gps-bracket: NestleCubeCeilTest: new toplevel
Ian Jackson [Sun, 2 Dec 2012 23:36:50 +0000 (23:36 +0000)]
anke-gps-bracket: NestleCubeCeilTest: new toplevel

6 years agoslic3r-config: new bed temp
Ian Jackson [Sun, 2 Dec 2012 23:35:30 +0000 (23:35 +0000)]
slic3r-config: new bed temp

6 years agoanke-gps-bracket: NestleCubeBaseTest: adjustments
Ian Jackson [Sun, 2 Dec 2012 23:35:13 +0000 (23:35 +0000)]
anke-gps-bracket: NestleCubeBaseTest: adjustments

6 years agoanke-gps-bracket: NestleCubeBaseTest: as printed
Ian Jackson [Sun, 2 Dec 2012 23:34:45 +0000 (23:34 +0000)]
anke-gps-bracket: NestleCubeBaseTest: as printed

6 years agoanke-gps-bracket: NestleCube: add NestleCubeBaseTest to commented-out invocations
Ian Jackson [Sun, 2 Dec 2012 19:29:55 +0000 (19:29 +0000)]
anke-gps-bracket: NestleCube: add NestleCubeBaseTest to commented-out invocations

6 years agoanke-gps-bracket: NestleCube: add NestleCubeBaseTest
Ian Jackson [Sun, 2 Dec 2012 19:29:34 +0000 (19:29 +0000)]
anke-gps-bracket: NestleCube: add NestleCubeBaseTest

6 years agoanke-gps-bracket: NestleCube: fix duplicate face
Ian Jackson [Sun, 2 Dec 2012 19:29:19 +0000 (19:29 +0000)]
anke-gps-bracket: NestleCube: fix duplicate face

6 years agoanke-gps-bracket: todos now tracked on paper
Ian Jackson [Sun, 2 Dec 2012 18:33:41 +0000 (18:33 +0000)]
anke-gps-bracket: todos now tracked on paper

6 years agoanke-gps-bracket: NestleCube: fix azimuth
Ian Jackson [Sun, 2 Dec 2012 18:33:20 +0000 (18:33 +0000)]
anke-gps-bracket: NestleCube: fix azimuth

6 years agoanke-gps-bracket: NestleCube: bevels via triangles, abolish old NestleCubeBevels
Ian Jackson [Sun, 2 Dec 2012 18:31:36 +0000 (18:31 +0000)]
anke-gps-bracket: NestleCube: bevels via triangles, abolish old NestleCubeBevels

6 years agoanke-gps-bracket: NestleCube: bevels via triangles
Ian Jackson [Sun, 2 Dec 2012 18:31:02 +0000 (18:31 +0000)]
anke-gps-bracket: NestleCube: bevels via triangles

6 years agoanke-gps-bracket: NestleCube: before more points, reformat, nfc
Ian Jackson [Sun, 2 Dec 2012 18:22:05 +0000 (18:22 +0000)]
anke-gps-bracket: NestleCube: before more points, reformat, nfc

6 years agoanke-gps-bracket: NestleCube: more bevels, before do via more triangles
Ian Jackson [Sun, 2 Dec 2012 18:21:32 +0000 (18:21 +0000)]
anke-gps-bracket: NestleCube: more bevels, before do via more triangles

6 years agoanke-gps-bracket: NestleCube: add floor, adjust some sizes
Ian Jackson [Sun, 2 Dec 2012 18:06:37 +0000 (18:06 +0000)]
anke-gps-bracket: NestleCube: add floor, adjust some sizes

6 years agoanke-gps-bracket: NestleCube: add a bevel
Ian Jackson [Sun, 2 Dec 2012 17:56:02 +0000 (17:56 +0000)]
anke-gps-bracket: NestleCube: add a bevel

6 years agoanke-gps-bracket: NestleCube: add some { }, nfc
Ian Jackson [Sun, 2 Dec 2012 16:56:28 +0000 (16:56 +0000)]
anke-gps-bracket: NestleCube: add some { }, nfc

6 years agoanke-gps-bracket: NestleCube top size adjustments
Ian Jackson [Sun, 2 Dec 2012 16:50:51 +0000 (16:50 +0000)]
anke-gps-bracket: NestleCube top size adjustments

6 years agoanke-gps-bracket: fold fudge factors into nestle* sizes
Ian Jackson [Sun, 2 Dec 2012 16:46:46 +0000 (16:46 +0000)]
anke-gps-bracket: fold fudge factors into nestle* sizes

6 years agoanke-gps-bracket: ChassisBar: fix adjust of x pos
Ian Jackson [Sun, 2 Dec 2012 15:37:09 +0000 (15:37 +0000)]
anke-gps-bracket: ChassisBar: fix adjust of x pos

6 years agoanke-gps-bracket: ChassisBar: allow adjust of x pos
Ian Jackson [Sun, 2 Dec 2012 15:36:25 +0000 (15:36 +0000)]
anke-gps-bracket: ChassisBar: allow adjust of x pos

6 years agoanke-gps-bracket: ChassisBar: fix length
Ian Jackson [Sun, 2 Dec 2012 15:36:16 +0000 (15:36 +0000)]
anke-gps-bracket: ChassisBar: fix length

6 years agoslic3r-config: as loaded and then saved by slic3r 0.9.7
Ian Jackson [Sun, 2 Dec 2012 15:08:45 +0000 (15:08 +0000)]
slic3r-config: as loaded and then saved by slic3r 0.9.7

6 years agoslic3r-config: reduce temperatures, anke-gps-bracket parts seemed to stick to bed...
Ian Jackson [Sun, 2 Dec 2012 15:08:20 +0000 (15:08 +0000)]
slic3r-config: reduce temperatures, anke-gps-bracket parts seemed to stick to bed this time

6 years agoanke-gps-bracket: ChassisBar
Ian Jackson [Sun, 2 Dec 2012 00:18:02 +0000 (00:18 +0000)]
anke-gps-bracket: ChassisBar

6 years agoanke-gps-bracket: HolderSideR
Ian Jackson [Sun, 2 Dec 2012 00:03:49 +0000 (00:03 +0000)]
anke-gps-bracket: HolderSideR

6 years agoanke-gps-bracket: HolderSide
Ian Jackson [Sun, 2 Dec 2012 00:02:32 +0000 (00:02 +0000)]
anke-gps-bracket: HolderSide

6 years agoanke-gps-bracket: introduce model_outer[wht]. nfc
Ian Jackson [Sat, 1 Dec 2012 23:38:46 +0000 (23:38 +0000)]
anke-gps-bracket: introduce model_outer[wht].  nfc

6 years agoanke-gps-bracket: add NestleCubePin
Ian Jackson [Sat, 1 Dec 2012 23:29:00 +0000 (23:29 +0000)]
anke-gps-bracket: add NestleCubePin

6 years agoanke-gps-bracket: make NestleCube into a toplevel
Ian Jackson [Fri, 30 Nov 2012 23:34:58 +0000 (23:34 +0000)]
anke-gps-bracket: make NestleCube into a toplevel

6 years agoanke-gps-bracket: NestleCube: add doveclip
Ian Jackson [Fri, 30 Nov 2012 21:50:10 +0000 (21:50 +0000)]
anke-gps-bracket: NestleCube: add doveclip

6 years agoanke-gps-bracket: NestleCube has a hollow
Ian Jackson [Fri, 30 Nov 2012 21:41:29 +0000 (21:41 +0000)]
anke-gps-bracket: NestleCube has a hollow

6 years agoanke-gps-bracket: rename InsertionCube to NestleCube
Ian Jackson [Fri, 30 Nov 2012 21:08:11 +0000 (21:08 +0000)]
anke-gps-bracket: rename InsertionCube to NestleCube

6 years agoanke-gps-bracket: wip InsertionCube
Ian Jackson [Fri, 30 Nov 2012 21:07:44 +0000 (21:07 +0000)]
anke-gps-bracket: wip InsertionCube

6 years agoslic3r-config: increase temperatures since first try at anke-gps-bracket,GpsBody...
Ian Jackson [Thu, 29 Nov 2012 01:37:21 +0000 (01:37 +0000)]
slic3r-config: increase temperatures since first try at anke-gps-bracket,GpsBody warped

6 years agoanke-gps-bracket: move plug slop to one side of plug so it can print
Ian Jackson [Thu, 29 Nov 2012 01:02:41 +0000 (01:02 +0000)]
anke-gps-bracket: move plug slop to one side of plug so it can print

6 years agoanke-gps-bracket: remove some size adjustments which trigger a bug in Slic3r 0.9.7
Ian Jackson [Thu, 29 Nov 2012 00:56:59 +0000 (00:56 +0000)]
anke-gps-bracket: remove some size adjustments which trigger a bug in Slic3r 0.9.7

6 years agoanke-gps-bracket: post-prototype size adjustments
Ian Jackson [Thu, 29 Nov 2012 00:39:41 +0000 (00:39 +0000)]
anke-gps-bracket: post-prototype size adjustments

6 years agopronsolerc: retract and prefeed buttons
Ian Jackson [Wed, 28 Nov 2012 22:49:03 +0000 (22:49 +0000)]
pronsolerc: retract and prefeed buttons

6 years agoanke-gps-bracket: better list of debugging toplevels - abolish the LHS and RHS here
Ian Jackson [Wed, 28 Nov 2012 22:38:21 +0000 (22:38 +0000)]
anke-gps-bracket: better list of debugging toplevels - abolish the LHS and RHS here

6 years agoanke-gps-bracket: bevel the back
Ian Jackson [Wed, 28 Nov 2012 22:37:38 +0000 (22:37 +0000)]
anke-gps-bracket: bevel the back

6 years agoanke-gps-bracket: should fit in one plate
Ian Jackson [Wed, 28 Nov 2012 22:30:03 +0000 (22:30 +0000)]
anke-gps-bracket: should fit in one plate

6 years agoanke-gps-bracket: actual sizes
Ian Jackson [Wed, 28 Nov 2012 22:27:23 +0000 (22:27 +0000)]
anke-gps-bracket: actual sizes

6 years agoanke-gps-bracket: body lhs and rhs ok
Ian Jackson [Wed, 28 Nov 2012 21:33:03 +0000 (21:33 +0000)]
anke-gps-bracket: body lhs and rhs ok

6 years agoanke-gps-bracket: gps assembled ok
Ian Jackson [Wed, 28 Nov 2012 21:21:38 +0000 (21:21 +0000)]
anke-gps-bracket: gps assembled ok

6 years agoanke-gps-bracket: before plug adjust
Ian Jackson [Wed, 28 Nov 2012 19:04:52 +0000 (19:04 +0000)]
anke-gps-bracket: before plug adjust

6 years agoanke-gps-bracket: plugslop
Ian Jackson [Wed, 28 Nov 2012 19:02:30 +0000 (19:02 +0000)]
anke-gps-bracket: plugslop

6 years agoanke-gps-bracket: initial gps body model
Ian Jackson [Wed, 28 Nov 2012 19:01:01 +0000 (19:01 +0000)]
anke-gps-bracket: initial gps body model

6 years agodungeonquest-cone: One and Four toplevels
Ian Jackson [Sun, 25 Nov 2012 00:59:18 +0000 (00:59 +0000)]
dungeonquest-cone: One and Four toplevels

6 years agodungeonquest-cone: reduce temperatures
Ian Jackson [Sun, 25 Nov 2012 00:50:20 +0000 (00:50 +0000)]
dungeonquest-cone: reduce temperatures

6 years agoMerge branch 'master' of chiark:/u/ianmdlvl/reprap/play
Ian Jackson [Sun, 25 Nov 2012 00:46:55 +0000 (00:46 +0000)]
Merge branch 'master' of chiark:/u/ianmdlvl/reprap/play

6 years agodungeonquest-cone: initial
Ian Jackson [Sun, 25 Nov 2012 00:46:01 +0000 (00:46 +0000)]
dungeonquest-cone: initial

6 years agofilamentspool: FilamentCup: two prongs
Ian Jackson [Sat, 24 Nov 2012 22:13:12 +0000 (22:13 +0000)]
filamentspool: FilamentCup: two prongs

6 years agoslic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable...
Ian Jackson [Sat, 24 Nov 2012 22:12:46 +0000 (22:12 +0000)]
slic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable for flattish things with poor adhesion

6 years agoINSTRUCTIONS: slic3r rune
Ian Jackson [Sat, 24 Nov 2012 18:56:31 +0000 (18:56 +0000)]
INSTRUCTIONS: slic3r rune

6 years agoxeno-drivebay-bracket: RearCableProtector: add 10mm to protinnerh
Ian Jackson [Sat, 17 Nov 2012 17:10:55 +0000 (17:10 +0000)]
xeno-drivebay-bracket: RearCableProtector: add 10mm to protinnerh

6 years agoxeno-drivebay-bracket: ChannelBracket: initial
Ian Jackson [Sat, 17 Nov 2012 16:12:11 +0000 (16:12 +0000)]
xeno-drivebay-bracket: ChannelBracket: initial

6 years agoxeno-drivebay-bracket: ChannelBracket: initial
Ian Jackson [Sat, 17 Nov 2012 16:12:02 +0000 (16:12 +0000)]
xeno-drivebay-bracket: ChannelBracket: initial

6 years agoxeno-drivebay-bracket: ChannelBracket: wip
Ian Jackson [Sat, 17 Nov 2012 16:06:22 +0000 (16:06 +0000)]
xeno-drivebay-bracket: ChannelBracket: wip

6 years agoxeno-drivebay-bracket: RearCableProtector: diagonal screw holes
Ian Jackson [Sat, 17 Nov 2012 15:37:11 +0000 (15:37 +0000)]
xeno-drivebay-bracket: RearCableProtector: diagonal screw holes

6 years agoxeno-drivebay-bracket: initial RearCableProtector
Ian Jackson [Sat, 17 Nov 2012 15:35:29 +0000 (15:35 +0000)]
xeno-drivebay-bracket: initial RearCableProtector

6 years agoxeno-drivebay-bracket: try again with no pad (less web)
Ian Jackson [Sat, 17 Nov 2012 14:49:03 +0000 (14:49 +0000)]
xeno-drivebay-bracket: try again with no pad (less web)

6 years agoxeno-drivebay-bracket: try again with no pad
Ian Jackson [Sat, 17 Nov 2012 14:46:29 +0000 (14:46 +0000)]
xeno-drivebay-bracket: try again with no pad

6 years agoxeno-drivebay-bracket: no pads since we need no lid any more
Ian Jackson [Sat, 17 Nov 2012 13:59:59 +0000 (13:59 +0000)]
xeno-drivebay-bracket: no pads since we need no lid any more

6 years agoxeno-drivebay-bracket: remove obsolete setting
Ian Jackson [Sat, 17 Nov 2012 13:59:45 +0000 (13:59 +0000)]
xeno-drivebay-bracket: remove obsolete setting