slic3r-config: as sgt's GB printed, sliced on anarres

diff --git a/pronsolerc b/pronsolerc
index 733d068510b814177336700a29eef490736607ea..63f84b1feec0fb5e6498df6d192450bbd5040f5e 100644 (file)
--- a/pronsolerc
+++ b/pronsolerc
@@ -23,7 +23,7 @@ button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
 set last_bed_temperature 90.0
 set baudrate 115200
-set last_file_path /home/reprap/play
+set last_file_path /home/reprap/guests/sgtatham-gbrelief
 set xy_feedrate 3000
 set z_feedrate 200
 set e_feedrate 1500

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 3b920879130ec8c9e62b2cb66ec94eec8eb89c9c..bcb830e5488d5892ab813ca5965711e348b42282 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,8 +1,8 @@
-# generated by Slic3r 0.9.7 on Sun Dec 16 20:42:19 2012
+# generated by Slic3r 0.9.1 on Thu Feb 14 20:07:32 2013
+ = 
 acceleration = 0
-bed_size = 140,140
-bed_temperature = 100
-bottom_solid_layers = 3
+bed_size = 140,150
+bed_temperature = 90
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -28,13 +28,12 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 90
+first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 215
 g0 = 0
-gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
@@ -48,10 +47,8 @@ layer_height = 0.4
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
-min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
-only_retract_when_crossing_perimeters = 0
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
@@ -63,10 +60,8 @@ print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
-retract_length_toolchange = 3
 retract_lift = 0.1
 retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
 retract_speed = 30
 rotate = 0
 scale = 1
@@ -76,9 +71,8 @@ skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
 solid_infill_speed = 60
+solid_layers = 3
 start_gcode = G28 ; home all axes
 support_material = 0
 support_material_angle = 0
@@ -86,13 +80,10 @@ support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
-support_material_speed = 60
 support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
-top_solid_layers = 3
 travel_speed = 130
 use_relative_e_distances = 0
-vibration_limit = 0
 z_offset = 0