chiark / gitweb /
slic3r-config: as loaded and then saved by slic3r 0.9.7
authorIan Jackson <ijackson@chiark.greenend.org.uk>
Sun, 2 Dec 2012 15:08:45 +0000 (15:08 +0000)
committerIan Jackson <ijackson@chiark.greenend.org.uk>
Sun, 2 Dec 2012 15:08:45 +0000 (15:08 +0000)
slic3r-config.ini

index 746b84e..3d5e5e9 100644 (file)
@@ -1,7 +1,8 @@
-# generated by Slic3r 0.9.1 on Thu Nov 29 00:42:51 2012
+# generated by Slic3r 0.9.7 on Sun Dec  2 15:05:35 2012
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 90
+bottom_solid_layers = 3
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -33,6 +34,7 @@ first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 215
 g0 = 0
+gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
@@ -46,8 +48,10 @@ layer_height = 0.4
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
+min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
+only_retract_when_crossing_perimeters = 0
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
@@ -59,8 +63,10 @@ print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
+retract_length_toolchange = 3
 retract_lift = 0.1
 retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
 retract_speed = 30
 rotate = 0
 scale = 1
@@ -70,8 +76,9 @@ skirts = 2
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
 solid_infill_speed = 60
-solid_layers = 3
 start_gcode = G28 ; home all axes
 support_material = 0
 support_material_angle = 0
@@ -79,10 +86,13 @@ support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
+support_material_speed = 60
 support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
+top_solid_layers = 3
 travel_speed = 130
 use_relative_e_distances = 0
+vibration_limit = 0
 z_offset = 0