chiark / gitweb /
belt-hole-cut-jig-simple: first try of one for smaller punch
authorIan Jackson <ijackson@chiark.greenend.org.uk>
Sat, 3 May 2014 23:21:41 +0000 (00:21 +0100)
committerIan Jackson <ijackson@chiark.greenend.org.uk>
Sat, 3 May 2014 23:21:41 +0000 (00:21 +0100)
belt-hole-cut-jig-simple.scad
slic3r-config.ini

index 7608467..e214af3 100644 (file)
@@ -11,11 +11,11 @@ jig_interval = 20;
 
 reg_blocks = 3;
 
-jig_iters = 7; //xxx
+jig_iters = 1;
 
 roof_thick = 4;
 regblock_thick = 4;
-punchtube_thick = 2.0;
+punchtube_thick = 1.8;
 
 total_h = 33;
 punchfree_h = 8;
@@ -70,7 +70,7 @@ module PerHole(){
 
 module Shells(){
   PerHole(){
-    cylinder(r=punchhole_r+punchtube_thick, h=total_h-punchfree_h);
+    cylinder(r=punchhole_r+punchtube_thick, h=total_h-punchfree_h, $fn=50);
   }
 }
 
index b98386c..2c38ddd 100644 (file)
@@ -1,8 +1,8 @@
-# generated by Slic3r 0.9.7 on Mon Mar 10 17:22:59 2014
+# generated by Slic3r 0.9.7 on Sun May  4 00:21:18 2014
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 100
-bottom_solid_layers = 3
+bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -25,7 +25,7 @@ extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
-fill_angle = 45
+fill_angle = 0
 fill_density = 0.2
 fill_pattern = rectilinear
 first_layer_bed_temperature = 100
@@ -51,7 +51,7 @@ min_print_speed = 10
 min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
@@ -91,7 +91,7 @@ support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
-top_solid_layers = 3
+top_solid_layers = 2
 travel_speed = 130
 use_relative_e_distances = 0
 vibration_limit = 0