belt-hole-cut-jig-simple: first try of one for smaller punch

diff --git a/belt-hole-cut-jig-simple.scad b/belt-hole-cut-jig-simple.scad
index 7608467ff619bc86c872fb55ed588de9700f2ec3..e214af38558538a3aafcae12a4d07efdf0713c87 100644 (file)
--- a/belt-hole-cut-jig-simple.scad
+++ b/belt-hole-cut-jig-simple.scad
@@ -11,11 +11,11 @@ jig_interval = 20;
 
 reg_blocks = 3;
 
 
 reg_blocks = 3;
 

-jig_iters = 7; //xxx
+jig_iters = 1;

 
 roof_thick = 4;
 regblock_thick = 4;
 
 roof_thick = 4;
 regblock_thick = 4;

-punchtube_thick = 2.0;
+punchtube_thick = 1.8;

 
 total_h = 33;
 punchfree_h = 8;
 
 total_h = 33;
 punchfree_h = 8;


@@ -70,7 +70,7 @@ module PerHole(){
 
 module Shells(){
   PerHole(){
 
 module Shells(){
   PerHole(){

-    cylinder(r=punchhole_r+punchtube_thick, h=total_h-punchfree_h);
+    cylinder(r=punchhole_r+punchtube_thick, h=total_h-punchfree_h, $fn=50);

   }
 }
 
   }
 }
 

diff --git a/slic3r-config.ini b/slic3r-config.ini
index b98386cd2645a6d07f72f46c69f912113baf282f..2c38ddda2a34870a83de2fd830f1f2d42bc1af69 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,8 +1,8 @@
-# generated by Slic3r 0.9.7 on Mon Mar 10 17:22:59 2014
+# generated by Slic3r 0.9.7 on Sun May  4 00:21:18 2014

 acceleration = 0
 bed_size = 140,140
 bed_temperature = 100
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 100

-bottom_solid_layers = 3
+bottom_solid_layers = 2

 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60


@@ -25,7 +25,7 @@ extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77

-fill_angle = 45
+fill_angle = 0

 fill_density = 0.2
 fill_pattern = rectilinear
 first_layer_bed_temperature = 100
 fill_density = 0.2
 fill_pattern = rectilinear
 first_layer_bed_temperature = 100


@@ -51,7 +51,7 @@ min_print_speed = 10
 min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
 min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50

-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1

 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1


@@ -91,7 +91,7 @@ support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50

-top_solid_layers = 3
+top_solid_layers = 2

 travel_speed = 130
 use_relative_e_distances = 0
 vibration_limit = 0
 travel_speed = 130
 use_relative_e_distances = 0
 vibration_limit = 0