slic3r-config warptest2 shows that higher temps work better

diff --git a/slic3r-config.ini b/slic3r-config.ini
index e486180d126901237e099703fb889e058564086c..794667c164cacab7514a512df38344836b649421 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sun Oct 14 22:11:17 2012
+# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012

 acceleration = 0
 bed_size = 140,140
 acceleration = 0
 bed_size = 140,140

-bed_temperature = 80
+bed_temperature = 90

 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60


@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear

-first_layer_bed_temperature = 70
+first_layer_bed_temperature = 80

 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%


@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45

-temperature = 210
+temperature = 215

 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130