chiark / gitweb /
5 years agoutil: never use ether_ntoa(), since it formats with %x, not %02x, which makes etherne...
Lennart Poettering [Fri, 15 Aug 2014 11:18:50 +0000 (13:18 +0200)]
util: never use ether_ntoa(), since it formats with %x, not %02x, which makes ethernet addresses look funny

5 years agounit: remove spurious newline
Lennart Poettering [Fri, 15 Aug 2014 10:57:46 +0000 (12:57 +0200)]
unit: remove spurious newline

5 years agonetworkctl: increase column width for link type to 18, to accomodate for 'ieee80211_r...
Lennart Poettering [Fri, 15 Aug 2014 10:57:33 +0000 (12:57 +0200)]
networkctl: increase column width for link type to 18, to accomodate for 'ieee80211_radiotap'

5 years agonetworkd: rename UseDomainName to UseDomains
Tom Gundersen [Fri, 15 Aug 2014 10:45:59 +0000 (12:45 +0200)]
networkd: rename UseDomainName to UseDomains

This option will also apply to the search domains, so make it plural.

5 years agosysctl: always write in addition to net.ipv4.conf.default...
Lennart Poettering [Fri, 15 Aug 2014 10:07:33 +0000 (12:07 +0200)]
sysctl: always write in addition to

Otherwise we have a boot-time race, where interfaces that popped up
after the sysctl service would get the settings applied, but all others

5 years agocgroup: downgrade log messages about non-existant cgroup attributes to LOG_DEBUG
Lennart Poettering [Fri, 15 Aug 2014 09:56:36 +0000 (11:56 +0200)]
cgroup: downgrade log messages about non-existant cgroup attributes to LOG_DEBUG

5 years agocgroup: never try to create files in cgroupfs, only open them for writing
Lennart Poettering [Fri, 15 Aug 2014 09:55:43 +0000 (11:55 +0200)]
cgroup: never try to create files in cgroupfs, only open them for writing

This should have the benefit that cg_set_attribute() returns ENOENT
instead of EACCESS when we use it for non-existing attributes.

5 years agotest: fix strtod() test
David Herrmann [Fri, 15 Aug 2014 08:44:43 +0000 (10:44 +0200)]
test: fix strtod() test

One strtod() test is broken since:

commit 8e211000025940b770794abf5754de61b4add0af
Author: Thomas Hindoe Paaboel Andersen <>
Date:   Mon Aug 4 23:13:31 2014 +0200

    test: use fabs on doubles

The commit was right, so no reason to revert it, but the test was broken
before and only worked by coincidence. Convert "0,5" to "0.5" so we don't
depend on locales for double conversion (or well, we depend on "C" which
seems reasonable).

5 years agonetworkctl: print local domain name in status output
Lennart Poettering [Fri, 15 Aug 2014 01:06:11 +0000 (03:06 +0200)]
networkctl: print local domain name in status output

5 years agodhcp: the localhost isn't valid as hostname either
Lennart Poettering [Fri, 15 Aug 2014 01:05:44 +0000 (03:05 +0200)]
dhcp: the localhost isn't valid as hostname either

5 years agocoredump: display libdw fail string on stack trace fail
Umut Tezduyar Lindskog [Tue, 8 Jul 2014 14:16:14 +0000 (16:16 +0200)]
coredump: display libdw fail string on stack trace fail

- systemd[1]: hello.service: main process exited, code= dumped, status=3/QUIT
- systemd-coredump[2541]: Failed to generate stack trace: Unwinding not supported for this architecture
- systemd-coredump[2541]: Process 1024 (hello) of user 154 dumped core.

5 years agoman: drop references to removed and obsolete 'systemctl load' command
Lennart Poettering [Fri, 15 Aug 2014 00:41:14 +0000 (02:41 +0200)]
man: drop references to removed and obsolete 'systemctl load' command

5 years agosocket: add bus property for bus property NoDelay
Susant Sahani [Thu, 14 Aug 2014 17:36:13 +0000 (23:06 +0530)]
socket: add bus property for bus property NoDelay

Missed to add the SD_BUS_PROPERTY for no_delay.

5 years agosocket: Add support for TCP defer accept
Susant Sahani [Thu, 14 Aug 2014 17:36:12 +0000 (23:06 +0530)]
socket: Add support for TCP defer accept

TCP_DEFER_ACCEPT Allow a listener to be awakened only when data
arrives on the socket. If TCP_DEFER_ACCEPT set on a server-side
listening socket, the TCP/IP stack will not to wait for the final
ACK packet and not to initiate the process until the first packet
of real data has arrived. After sending the SYN/ACK, the server will
then wait for a data packet from a client. Now, only three packets
will be sent over the network, and the connection establishment delay
will be significantly reduced.

5 years agosocket: Add Support for TCP keep alive variables
Susant Sahani [Thu, 14 Aug 2014 17:36:11 +0000 (23:06 +0530)]
socket: Add Support for TCP keep alive variables

The tcp keep alive variables now can be configured via conf
parameter. Follwing variables are now supported by this patch.

tcp_keepalive_intvl: The number of seconds between TCP keep-alive probes

tcp_keepalive_probes: The maximum number of TCP keep-alive probes to
send before giving up and killing the connection if no response is
obtained from the other end.

tcp_keepalive_time: The number of seconds a connection needs to be
idle before TCP begins sending out keep-alive probes.

5 years agoupdate TODO
Lennart Poettering [Thu, 14 Aug 2014 23:25:36 +0000 (01:25 +0200)]
update TODO

5 years agocore: Refuse mount on symlink
Timofey Titovets [Thu, 14 Aug 2014 23:05:47 +0000 (02:05 +0300)]
core: Refuse mount on symlink

5 years agonetworkd: don't respect domainname from DHCP by default
Tom Gundersen [Thu, 14 Aug 2014 23:08:46 +0000 (01:08 +0200)]
networkd: don't respect domainname from DHCP by default

Most routers will send garbage, so make this opt-in only.

5 years agosd-dhcp-lease: verify hostname and domainnames we receive
Tom Gundersen [Thu, 14 Aug 2014 23:04:53 +0000 (01:04 +0200)]
sd-dhcp-lease: verify hostname and domainnames we receive

5 years agoresolved: pull in domain names from sd-network
Tom Gundersen [Thu, 14 Aug 2014 20:18:22 +0000 (22:18 +0200)]
resolved: pull in domain names from sd-network

5 years agosd-network: add sd_network_linkg_get_domains()
Tom Gundersen [Thu, 14 Aug 2014 18:35:37 +0000 (20:35 +0200)]
sd-network: add sd_network_linkg_get_domains()

For now this only exposes the domain name (DHCP Option 15), and not
the search string (DHCP Option 119), which will be implemented in
a follow-up patch.

5 years agomachine_kill(): Don't kill the unit when killing the leader
Eelco Dolstra [Thu, 14 Aug 2014 17:59:16 +0000 (19:59 +0200)]
machine_kill(): Don't kill the unit when killing the leader

If "machinectl poweroff" or "machinectl reboot" is used on a
systemd-nspawn container started with --keep-unit and --register, it
should *only* send the appropriate signal to the leader PID (i.e. the
container's systemd process). It shouldn't fall through to
manager_kill_unit() to also send the signal to the unit. The latter
ends up killing systemd-nspawn, which takes down the container

5 years agoresolved: clarify that LLMNR scopes must have a link assigned
Lennart Poettering [Thu, 14 Aug 2014 17:56:22 +0000 (19:56 +0200)]
resolved: clarify that LLMNR scopes must have a link assigned

This is supposed to remove some compiler warnings:

5 years agoupdate TODO
Lennart Poettering [Thu, 14 Aug 2014 17:02:48 +0000 (19:02 +0200)]
update TODO

5 years agocore: do not add default dependencies to /usr mount unit
Jon Severinsson [Mon, 21 Jul 2014 22:39:13 +0000 (00:39 +0200)]
core: do not add default dependencies to /usr mount unit

This makes no difference if /usr was mounted in the initrd,
and brings the behaviour of legacy systems closer to those
with a propper initrd.

5 years agoupdate TODO
Lennart Poettering [Thu, 14 Aug 2014 15:16:37 +0000 (17:16 +0200)]
update TODO

5 years agocore: move status line ellipsation to 50% of the line
Lennart Poettering [Thu, 14 Aug 2014 15:15:09 +0000 (17:15 +0200)]
core: move status line ellipsation to 50% of the line

5 years agoupdate TODO
Lennart Poettering [Thu, 14 Aug 2014 14:36:25 +0000 (16:36 +0200)]
update TODO

5 years agoanalyze: some fixes to the --help text
Lennart Poettering [Thu, 14 Aug 2014 14:36:18 +0000 (16:36 +0200)]
analyze: some fixes to the --help text

5 years agoRevert "socket: add support for TCP fast Open"
Lennart Poettering [Thu, 14 Aug 2014 14:34:47 +0000 (16:34 +0200)]
Revert "socket: add support for TCP fast Open"

This reverts commit 9528592ff8d7ff361da430285deba8196e8984d5.

Apparently TFO is actually the default at least for the server side now.

Also the setsockopt doesn't actually take a bool, but a qlen integer.

5 years agonetworkd: link - don't enter LINK_CONFIGURED more than once
Tom Gundersen [Thu, 14 Aug 2014 12:13:36 +0000 (14:13 +0200)]
networkd: link - don't enter LINK_CONFIGURED more than once

5 years agonetworkd: link - print address lifetime for tracked addresses
Tom Gundersen [Thu, 14 Aug 2014 12:01:11 +0000 (14:01 +0200)]
networkd: link - print address lifetime for tracked addresses

This should help in debugging issues with DHCP lease renewal.

5 years agosocket: add support for TCP fast Open
Susant Sahani [Thu, 14 Aug 2014 09:01:47 +0000 (14:31 +0530)]
socket: add support for TCP fast Open

TCP Fast Open (TFO) speeds up the opening of successiveTCP)
connections between two endpoints.It works by using a TFO cookie
in the initial SYN packet to authenticate a previously connected
client. It starts sending data to the client before the receipt
of the final ACK packet of the three way handshake is received,
skipping a round trip and lowering the latency in the start of
transmission of data.

5 years agoupdate TODO
Lennart Poettering [Thu, 14 Aug 2014 02:13:31 +0000 (04:13 +0200)]
update TODO

5 years agoupdate TODO
Lennart Poettering [Thu, 14 Aug 2014 01:30:40 +0000 (03:30 +0200)]
update TODO

5 years agosocket: add support for tcp nagle
Susant Sahani [Mon, 28 Jul 2014 06:48:29 +0000 (12:18 +0530)]
socket: add support for tcp nagle

This patch adds support for TCP TCP_NODELAY socket option. This can be
configured via NoDelay conf parameter. TCP Nagle's algorithm works by
combining a number of small outgoing messages, and sending them all at
once.  This controls the TCP_NODELAY socket option.

5 years agologind: add new session type "web" for PAM web clients, such as cockpit
Lennart Poettering [Thu, 14 Aug 2014 00:59:02 +0000 (02:59 +0200)]
logind: add new session type "web" for PAM web clients, such as cockpit

On request of Stef Walter.

5 years agoutil: allow strappenda to take any number of args
Dave Reisner [Tue, 11 Mar 2014 14:41:22 +0000 (10:41 -0400)]
util: allow strappenda to take any number of args

This makes strappenda3 redundant, so we remove its usage and
definition. Add a few tests along the way for sanity.

5 years agosd-event: drop _likely_()
Tom Gundersen [Wed, 13 Aug 2014 23:59:58 +0000 (01:59 +0200)]
sd-event: drop _likely_()

This is not certain to be likely.

Lennart says: a frequent usecase is invoking some function regularly in intervals
in such a case every single iteration we'll have to rearm

5 years agotimer: order OnCalendar units after if DefaultDependencies=no
Tobias Geerinckx-Rice [Mon, 4 Aug 2014 20:15:52 +0000 (22:15 +0200)]
timer: order OnCalendar units after if DefaultDependencies=no

Avoids triggering timers prematurely on systems with significantly inaccurate
clocks, or some embedded platforms that lack one entirely.

5 years agoudev: link-config - fix crash due to missing hwaddr
Tom Gundersen [Wed, 13 Aug 2014 23:35:16 +0000 (01:35 +0200)]
udev: link-config - fix crash due to missing hwaddr

Reported by:

5 years agotest: dhcp-server - fix test
Tom Gundersen [Wed, 13 Aug 2014 23:28:35 +0000 (01:28 +0200)]
test: dhcp-server - fix test

Reported by Corey Hammerton on G+

5 years agosd-dhcp-server: linebreaks
Tom Gundersen [Wed, 13 Aug 2014 23:26:55 +0000 (01:26 +0200)]
sd-dhcp-server: linebreaks

Don't overflow unnecessarily.

5 years agosd-event: do not arm timers unnecessarily
Tom Gundersen [Wed, 13 Aug 2014 22:22:27 +0000 (00:22 +0200)]
sd-event: do not arm timers unnecessarily

Rather than recalculating the next timeout on every loop, we only do it when something changed.

5 years agonetworkctl: also use the same color logic when running "networkctl status" without...
Lennart Poettering [Wed, 13 Aug 2014 23:23:20 +0000 (01:23 +0200)]
networkctl: also use the same color logic when running "networkctl status" without arguments

5 years agonetworkctl: add the same color logic to "list" and "status" outputs
Lennart Poettering [Wed, 13 Aug 2014 23:18:37 +0000 (01:18 +0200)]
networkctl: add the same color logic to "list" and "status" outputs

And always put operational state first, setup state second.

5 years agonetworkctl: name setup state variable setup_state
Lennart Poettering [Wed, 13 Aug 2014 23:10:08 +0000 (01:10 +0200)]
networkctl: name setup state variable setup_state

5 years agonetworkctl: update column header to new 'setup' state naming
Lennart Poettering [Wed, 13 Aug 2014 23:08:46 +0000 (01:08 +0200)]
networkctl: update column header to new 'setup' state naming

5 years agoresolved: enable LLMNR
Lennart Poettering [Wed, 13 Aug 2014 23:00:57 +0000 (01:00 +0200)]
resolved: enable LLMNR

THis was accidentally broken, as we truned off LLMNR far to frequently,
where we only wanted to turn off LLMNr on IPV6 on kernels lacking
support for it.

5 years agoresolved: allow passing on which protocol, family and interface to look something up
Lennart Poettering [Wed, 13 Aug 2014 23:00:15 +0000 (01:00 +0200)]
resolved: allow passing on which protocol, family and interface to look something up

Also, return on which protocol/family/interface we found something.

5 years agoldconfig: add configure option to disable
Umut Tezduyar Lindskog [Tue, 5 Aug 2014 10:17:09 +0000 (12:17 +0200)]
ldconfig: add configure option to disable

5 years agosd-networkd: rename link_get_state to link_get_setup_state
Tom Gundersen [Wed, 13 Aug 2014 20:55:49 +0000 (22:55 +0200)]
sd-networkd: rename link_get_state to link_get_setup_state

Suggested by Kay and Lennart.

5 years agosd-network: rename operstates 'down' -> 'off' and 'up' -> 'no-carrier'
Tom Gundersen [Wed, 13 Aug 2014 20:44:35 +0000 (22:44 +0200)]
sd-network: rename operstates 'down' -> 'off' and 'up' -> 'no-carrier'

Suggested by Lennart and Kay.

5 years agosd-network: /_get_link_/_link_get_/
Tom Gundersen [Wed, 13 Aug 2014 20:37:45 +0000 (22:37 +0200)]
sd-network: /_get_link_/_link_get_/

The link is the 'object', so make this in line with our usual naming convention.

Suggested by Kay and Lennart.

5 years agonetworkctl: color status dump without link name
Daniel Buch [Wed, 13 Aug 2014 20:02:27 +0000 (22:02 +0200)]
networkctl: color status dump without link name

Lets mimic colored operational state dump as if link name is appiled

5 years agotimesyncd: don't trip up if networkd isn't running and can't tell us any NTP servers
Lennart Poettering [Wed, 13 Aug 2014 19:07:07 +0000 (21:07 +0200)]
timesyncd: don't trip up if networkd isn't running and can't tell us any NTP servers

5 years agojournald: Fix off-by-one error in "Missed X kernel messages" warning
Eelco Dolstra [Wed, 6 Aug 2014 11:14:51 +0000 (13:14 +0200)]
journald: Fix off-by-one error in "Missed X kernel messages" warning

On receiving a message, "kernel_seqnum" is set to "serial + 1". So
subtracting 1 will cause messages like "Missed 0 kernel messages",
which should be "Missed 1 kernel messages".

5 years agosd-network: bring comments up-to-date
Lennart Poettering [Wed, 13 Aug 2014 18:02:38 +0000 (20:02 +0200)]
sd-network: bring comments up-to-date

5 years agomount-setup: fix counting of early mounts without SMACK
Lennart Poettering [Wed, 13 Aug 2014 18:01:19 +0000 (20:01 +0200)]
mount-setup: fix counting of early mounts without SMACK

5 years agoupdate TODO
Lennart Poettering [Wed, 13 Aug 2014 18:01:00 +0000 (20:01 +0200)]
update TODO

5 years agojournald: also increase the SendBuffer of /dev/log to 8M
Lennart Poettering [Wed, 13 Aug 2014 16:53:05 +0000 (18:53 +0200)]
journald: also increase the SendBuffer of /dev/log to 8M

5 years agoswitch-root: not only mkdir the parents but the target dir
Harald Hoyer [Wed, 13 Aug 2014 14:45:53 +0000 (16:45 +0200)]
switch-root: not only mkdir the parents but the target dir

switch-root would only mkdir the parents of the mount move directories.

With this patch, the mount move target directory is created to make
switch-root to an empty root directory work.

5 years agobus-bloom: Fix bloom filter calculation
Denis Kenzior [Sat, 9 Aug 2014 07:06:21 +0000 (02:06 -0500)]
bus-bloom: Fix bloom filter calculation

i is being used incorrectly.  It is used to refer to the number of
indexes calculated so far (out of k).  However, it is also incremented
when a new hash key is being used.  This means that the results are
inconsistent with the desired behavior described in PORTING-DBUS1

The expected result is that for the default values of m and k (512, 8)
the 1st hash key should produce 4 indexes.  The second hash key is used
for the next 4 and overall 8 indexes into m are calculated.

The current behavior results in 6 indexes being calculated, 4 coming
from hash key 1 and 2 others from hash key 5.

5 years agoTODO
Tom Gundersen [Wed, 13 Aug 2014 13:43:57 +0000 (15:43 +0200)]

5 years agoTODO
Tom Gundersen [Wed, 13 Aug 2014 13:40:59 +0000 (15:40 +0200)]

5 years agonetworkctl: add colors to admin state and fix alignment
Tom Gundersen [Wed, 13 Aug 2014 13:36:11 +0000 (15:36 +0200)]
networkctl: add colors to admin state and fix alignment

It is useful to color in the admin state both to easily spot failed links, but also to quickly
distinguish between links that are fully configured and in degraded mode (only IPv4LL) or in
degraded mode and still waiting for DHCP.

5 years agosd-network: rename state INITALIZING to PENDING and expose as any other state
Tom Gundersen [Wed, 13 Aug 2014 13:34:27 +0000 (15:34 +0200)]
sd-network: rename state INITALIZING to PENDING and expose as any other state

This is the state when we are waiting for udev to initialize the device, and waiting for
libudev and rtnl to be in sync. In the future we probably will also be waiting for nl80211.
At this point we do not yet have enough information to know whether or not networkd should
be handling the device.

5 years agoresolved: skip IPv6 LLMNR if IPv6 is not available
Lennart Poettering [Wed, 13 Aug 2014 13:00:12 +0000 (15:00 +0200)]
resolved: skip IPv6 LLMNR if IPv6 is not available

5 years agologin: share VT-signal handler between sessions
David Herrmann [Mon, 11 Aug 2014 16:17:54 +0000 (18:17 +0200)]
login: share VT-signal handler between sessions

sd-event does not allow multiple handlers for a single signal. However,
logind sets up signal handlers for each session with VT_PROCESS set (that
is, it has an active controller). Therefore, registering multiple such
controllers will fail.

Lets make the VT-handler global, as it's mostly trivial, anyway. This way,
the sessions don't have to take care of that and we can simply acknowledge
all VT-switch requests as we always did.

5 years agonetworkd: dhcp4 - fix copy-paste error
Tom Gundersen [Tue, 12 Aug 2014 21:12:09 +0000 (23:12 +0200)]
networkd: dhcp4 - fix copy-paste error

Reported by poma.

5 years agonetworkd: disable ipv4ll default routes by default
Tom Gundersen [Tue, 12 Aug 2014 18:50:13 +0000 (20:50 +0200)]
networkd: disable ipv4ll default routes by default

This causes machines without connectivity to hang where they would otherwise fail. Keep it
opt-in for now, but consider whether we sholud just drop it.

5 years agosd-network: split the operstate 'unknown' into 'down' and 'up'
Tom Gundersen [Tue, 12 Aug 2014 18:00:34 +0000 (20:00 +0200)]
sd-network: split the operstate 'unknown' into 'down' and 'up'

5 years agonetworkd: link - split out dhcp4 handling
Tom Gundersen [Fri, 8 Aug 2014 10:12:17 +0000 (12:12 +0200)]
networkd: link - split out dhcp4 handling

5 years agoudev: link-config - fix naming policy
Tom Gundersen [Tue, 12 Aug 2014 11:15:11 +0000 (13:15 +0200)]
udev: link-config - fix naming policy

Don't exit the name-finding loop when the 'kernel' policy is detected. We should
still find a fallback name if possible in the (very likely) case that no kernel
name is set at all.

5 years agoudev: link-config - whitespace
Tom Gundersen [Tue, 12 Aug 2014 11:13:12 +0000 (13:13 +0200)]
udev: link-config - whitespace

Don't overflow 80 cols unneccessarily (we are ok with doing it when it improves readability, but that's not the case here).

5 years agonetworkd: link - fix IN_SET usage
Tom Gundersen [Wed, 6 Aug 2014 13:54:25 +0000 (15:54 +0200)]
networkd: link - fix IN_SET usage

5 years agonetworkd: link - split out ipv4ll handling
Tom Gundersen [Wed, 6 Aug 2014 13:54:03 +0000 (15:54 +0200)]
networkd: link - split out ipv4ll handling

5 years agonetworkd: link - make check for whether addresses/routes are being configured implicit
Tom Gundersen [Wed, 6 Aug 2014 11:48:11 +0000 (13:48 +0200)]
networkd: link - make check for whether addresses/routes are being configured implicit

5 years agonetworkd: split out networkd-link.h
Tom Gundersen [Wed, 6 Aug 2014 10:50:53 +0000 (12:50 +0200)]
networkd: split out networkd-link.h

5 years agoupdate TODO
Lennart Poettering [Tue, 12 Aug 2014 17:50:36 +0000 (19:50 +0200)]
update TODO

5 years agoman: minimal updates to resolved.conf man page
Lennart Poettering [Tue, 12 Aug 2014 17:49:15 +0000 (19:49 +0200)]
man: minimal updates to resolved.conf man page

5 years agotimesyncd: beef up NTP server selection logic, and acquire NTP servers from DHCP
Lennart Poettering [Tue, 12 Aug 2014 17:48:24 +0000 (19:48 +0200)]
timesyncd: beef up NTP server selection logic, and acquire NTP servers from DHCP

5 years agoresolved: return exit code of event loop
Lennart Poettering [Tue, 12 Aug 2014 17:33:09 +0000 (19:33 +0200)]
resolved: return exit code of event loop

5 years agoresolved: unify logic how we flush out DNS servers we learnt
Lennart Poettering [Tue, 12 Aug 2014 17:32:55 +0000 (19:32 +0200)]
resolved: unify logic how we flush out DNS servers we learnt

5 years agosd-resolve: scale number of threads by queries currently being processed, rather...
Lennart Poettering [Tue, 12 Aug 2014 17:29:38 +0000 (19:29 +0200)]
sd-resolve: scale number of threads by queries currently being processed, rather than number of queries currently referenced

This way a query that blocks for a longer time, and whose reference has
been dropped won't block subsequent lookups from finishing.

5 years agosd-resolve: fix allocation if query ids, never reuse them
Lennart Poettering [Tue, 12 Aug 2014 17:29:27 +0000 (19:29 +0200)]
sd-resolve: fix allocation if query ids, never reuse them

5 years agosd-resolve: keep floating query referenced while we access it
Lennart Poettering [Tue, 12 Aug 2014 17:28:32 +0000 (19:28 +0200)]
sd-resolve: keep floating query referenced while we access it

5 years agotimesyncd: split up into multiple source file
Lennart Poettering [Tue, 12 Aug 2014 14:58:56 +0000 (16:58 +0200)]
timesyncd: split up into multiple source file

The source file got much too large, hence split up the sources into
multiple per-object files, similar in style to resolved.

5 years agonetworkctl: make networkctl status without link name show all local IP addresses
Lennart Poettering [Tue, 12 Aug 2014 14:19:37 +0000 (16:19 +0200)]
networkctl: make networkctl status without link name show all local IP addresses

5 years agoupdate TODO
Lennart Poettering [Tue, 12 Aug 2014 14:12:53 +0000 (16:12 +0200)]
update TODO

5 years agonetworkctl: when outputing a list fo links, sort them by ifindex
Lennart Poettering [Tue, 12 Aug 2014 14:03:45 +0000 (16:03 +0200)]
networkctl: when outputing a list fo links, sort them by ifindex

5 years agoupdate TODO
Lennart Poettering [Tue, 12 Aug 2014 13:41:13 +0000 (15:41 +0200)]
update TODO

5 years agonetworkctl: add a bit of color to the output
Lennart Poettering [Tue, 12 Aug 2014 13:41:01 +0000 (15:41 +0200)]
networkctl: add a bit of color to the output

5 years agonetworkctl: add new switch "-a" to "networkctl status" to show verbose status of...
Lennart Poettering [Tue, 12 Aug 2014 13:19:30 +0000 (15:19 +0200)]
networkctl: add new switch "-a" to "networkctl status" to show verbose status of all local links

5 years agonetworkctl: properly format MAC addresses
Lennart Poettering [Tue, 12 Aug 2014 13:08:09 +0000 (15:08 +0200)]
networkctl: properly format MAC addresses

5 years agosd-network: add API to output all collected system-wide NTP and DNS servers
Lennart Poettering [Tue, 12 Aug 2014 13:05:21 +0000 (15:05 +0200)]
sd-network: add API to output all collected system-wide NTP and DNS servers

Also, output the collected information in "networkctl".

5 years agotimesyncd: move the generic sockaddr_equal() call to socket-util.h
Lennart Poettering [Tue, 12 Aug 2014 12:54:32 +0000 (14:54 +0200)]
timesyncd: move the generic sockaddr_equal() call to socket-util.h

5 years agonetworkd: expose a global list of DNS and NTP servers in the state file
Lennart Poettering [Tue, 12 Aug 2014 11:01:58 +0000 (13:01 +0200)]
networkd: expose a global list of DNS and NTP servers in the state file

5 years agoresolved: filter out duplicate DNS servers when writing resolv.conf
Lennart Poettering [Tue, 12 Aug 2014 10:21:10 +0000 (12:21 +0200)]
resolved: filter out duplicate DNS servers when writing resolv.conf

5 years agonetworkd: update manager_save() to use fflush_and_check() to simplify things a bit
Lennart Poettering [Tue, 12 Aug 2014 09:55:06 +0000 (11:55 +0200)]
networkd: update manager_save() to use fflush_and_check() to simplify things a bit