chiark / gitweb /
Ian Jackson [Wed, 24 Jan 2018 23:14:00 +0000 (23:14 +0000)]
fairphone-case: adjust jack size from v13
measured something from my bits box
jack sizes vary, this is a compromise
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 23:12:21 +0000 (23:12 +0000)]
fairphone-case: adjust jack pos from v13
measured, from our case edge to start of FP2 case indentation
1.00mm at far side
1.92mm at near side
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 23:00:40 +0000 (23:00 +0000)]
fairphone-case: adjust microusb from v13
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 23:00:04 +0000 (23:00 +0000)]
fairphone-case: turn off finger push hole
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 22:59:57 +0000 (22:59 +0000)]
fairphone-case: tolerate fingerpushhole_dias being [] to mean "none"
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 22:53:54 +0000 (22:53 +0000)]
fairphone-case: struts over button openings, depndent on support
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 22:41:00 +0000 (22:41 +0000)]
fairphone-case: reformat a bit (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 21:43:09 +0000 (21:43 +0000)]
fairphone-case: move keeper to lhs
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 21:42:52 +0000 (21:42 +0000)]
fairphone-case: introduce keeper_side (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 21:42:12 +0000 (21:42 +0000)]
fairphone-case: drop Keeper which generates two since we only have one now
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Wed, 24 Jan 2018 21:41:53 +0000 (21:41 +0000)]
fairphone-case: drop a commented-out obsolete bit
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 22 Jan 2018 01:48:39 +0000 (01:48 +0000)]
fairphone-case: hinge: really room to get at locknut
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 22 Jan 2018 01:48:28 +0000 (01:48 +0000)]
fairphone-case: hinge: remove leftover circle
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 22 Jan 2018 01:36:19 +0000 (01:36 +0000)]
fairphone-case: hinge: make locknuts accessible
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 22 Jan 2018 00:39:42 +0000 (00:39 +0000)]
fairphone-case: move legs near hinge closer to hinge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 22 Jan 2018 00:02:48 +0000 (00:02 +0000)]
fairphone-case: bodge HingeLever to have space for nut
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 22 Jan 2018 00:01:40 +0000 (00:01 +0000)]
fairphone-case: fix hex22 (from v11)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Mon, 22 Jan 2018 00:00:14 +0000 (00:00 +0000)]
fairphone-case: add catch to base
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 23:52:03 +0000 (23:52 +0000)]
fairphone-case: add catch to lid
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 23:51:58 +0000 (23:51 +0000)]
fairphone-case: catch adjustments from previow
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 23:43:24 +0000 (23:43 +0000)]
fairphone-case: wip catch
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 23:36:38 +0000 (23:36 +0000)]
fairphone-case: wip catch
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 22:15:22 +0000 (22:15 +0000)]
fairphone-case: hinge: fix under slope of base arms
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 22:06:46 +0000 (22:06 +0000)]
fairphone-case: hinge: take max of r1 and r2
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 22:03:35 +0000 (22:03 +0000)]
fairphone-case: adjust microusb from v10
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 21:55:31 +0000 (21:55 +0000)]
fairphone-case: adjust fingerpushhole
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 21:11:03 +0000 (21:11 +0000)]
fairphone-case: hinge: move everything up, so top is flat
avoids any need for support or further adjustment or something
for the top of the arm
also combines the two microusb holes in the lever
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 21:09:00 +0000 (21:09 +0000)]
fairphone-case: make space for microusb in hinge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 21:06:45 +0000 (21:06 +0000)]
fairphone-case: introduce Flip_hinge (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 21:05:15 +0000 (21:05 +0000)]
fairphone-case: introduce MicroUSB
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:49:20 +0000 (20:49 +0000)]
fairphone-case: hinge: rename HingeScrews from Demo... (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:48:32 +0000 (20:48 +0000)]
fairphone-case: hinge: printable lever
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:46:50 +0000 (20:46 +0000)]
fairphone-case: TestFrameLidPrint: fix orientation
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:46:43 +0000 (20:46 +0000)]
fairphone-case: hinge: screws: make holes
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:46:33 +0000 (20:46 +0000)]
fairphone-case: hinge: screws: move head away a bit (so we can bore with these too)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:41:42 +0000 (20:41 +0000)]
fairphone-case: adjust rear speaker from v9
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:41:31 +0000 (20:41 +0000)]
fairphone-case: hinge: screws
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:22:27 +0000 (20:22 +0000)]
fairphone-case: hinge: wip
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:10:42 +0000 (20:10 +0000)]
fairphone-case: hinge: Arms on lid
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:05:37 +0000 (20:05 +0000)]
fairphone-case: hinge: introduce DemoFrame
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:01:42 +0000 (20:01 +0000)]
fairphone-case: remove some debug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 20:01:36 +0000 (20:01 +0000)]
fairphone-case: wip hinge, fix screw head keeper interaction
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:57:07 +0000 (19:57 +0000)]
fairphone-case: wip hinge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:45:53 +0000 (19:45 +0000)]
fairphone-case: call Flip_rhs with an atom when we can (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:44:39 +0000 (19:44 +0000)]
fairphone-case: rename Flip operators (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:43:23 +0000 (19:43 +0000)]
fairphone-case: wip hinge, wip on base
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:40:14 +0000 (19:40 +0000)]
fairphone-case: wip hinge, rename Hinger to Lever (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:29:32 +0000 (19:29 +0000)]
fairphone-case: wip hinge, HingerBaseProfile
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:24:21 +0000 (19:24 +0000)]
fairphone-case: wip hinge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:10:20 +0000 (19:10 +0000)]
utils, fairphone-case: move various things into utils
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:02:28 +0000 (19:02 +0000)]
fairphone-case: provide TestLengthRight
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 19:02:19 +0000 (19:02 +0000)]
fairphone-case: introduce TestSelectLength (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 18:55:27 +0000 (18:55 +0000)]
fairphone-case: adjust length from v8
feeler gauge says .55 to .75mm spare from width test
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 18:38:58 +0000 (18:38 +0000)]
fairphone-case: wip hinge
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:38:54 +0000 (17:38 +0000)]
fairphone-case: add fingerpushhole
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:34:25 +0000 (17:34 +0000)]
fairphone-case: replace RearSpeakerAperture with OrdinaryRearApertures
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:28:54 +0000 (17:28 +0000)]
fairphone-case: TestSelectCamera: join to top again
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:28:03 +0000 (17:28 +0000)]
fairphone-case: use TestSelectRearAperture for TestSelectCamera
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:27:16 +0000 (17:27 +0000)]
fairphone-case: introduce TestSelectRearAperture (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:27:00 +0000 (17:27 +0000)]
fairphone-case: introduce RearCameraAperture (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:22:05 +0000 (17:22 +0000)]
fairphone-case: TestSelectCamera: reduce a bit
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:21:50 +0000 (17:21 +0000)]
fairphone-case: TestSelectRearSpeaker: use RearSpeakerAperture (little change)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:17:36 +0000 (17:17 +0000)]
fairphone-case: introduce RearSpeakerAperture (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:16:20 +0000 (17:16 +0000)]
fairphone-case: add Rear speaker aperture to TestFrameCase
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:10:06 +0000 (17:10 +0000)]
fairphone-case: Rear speaker aperture
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:09:57 +0000 (17:09 +0000)]
fairphone-case: CaseBase_botflip: provide yn and $botflip (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 17:09:36 +0000 (17:09 +0000)]
fairphone-case: provide linextr (no callers yet, so nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 16:48:03 +0000 (16:48 +0000)]
fairphone-case: introduce noise cancel mic opening
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 16:47:53 +0000 (16:47 +0000)]
fairphone-case: fix CaseAperture (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 16:42:03 +0000 (16:42 +0000)]
fairphone-case: Introduce CaseAperture (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 16:38:04 +0000 (16:38 +0000)]
fairphone-case: wip noisecancelmic_pos (measurements only for now)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 15:33:37 +0000 (15:33 +0000)]
fairphone-case: fix TestLidWidthPrint (must have been broken by some refactor)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 15:31:44 +0000 (15:31 +0000)]
fairphone-case: provide jack
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 15:23:00 +0000 (15:23 +0000)]
fairphone-case: provide various Frame tests
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 15:13:23 +0000 (15:13 +0000)]
fairphone-case: provide LidPrint
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 15:01:46 +0000 (15:01 +0000)]
fairphone-case: commented out stabiliser leg near volume
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 15:01:35 +0000 (15:01 +0000)]
fairphone-case: LidButtonishLegs have l parameter (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 14:57:20 +0000 (14:57 +0000)]
fairphone-case: LidButtonishLegs
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 14:56:51 +0000 (14:56 +0000)]
fairphone-case: CaseBase_rhsflip: make a global (nfc)
This allows flipped things to tell which side they are on.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 14:30:36 +0000 (14:30 +0000)]
fairphone-case: add more buttons
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 14:30:07 +0000 (14:30 +0000)]
fairphone-case: fix SideButton calculations
nfc with the one current caller
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 14:29:53 +0000 (14:29 +0000)]
fairphone-case: fix phone[] vector orientation (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 14:22:19 +0000 (14:22 +0000)]
fairphone-case: remeasure power button posn
This is the measurement from the phone (top of phone to top of
button). It differs substantially from our previous value even
though it shouldn't.
v6 was the one which was overheated; maybe it was distorted
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 14:20:27 +0000 (14:20 +0000)]
fairphone-case: introduce SideButton y_ref_sign etc. (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:45:42 +0000 (13:45 +0000)]
fairphone-case: disable some debug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:45:10 +0000 (13:45 +0000)]
fairphone-case: SideButton: introduce and echo eff_y (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:39:51 +0000 (13:39 +0000)]
fairphone-case: adjust button fudge (nfc)
From remeasuring power button.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:38:24 +0000 (13:38 +0000)]
fairphone-case: adjust power button (from v6 with no bumpers)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:30:40 +0000 (13:30 +0000)]
fairphone-case: adjust camera again (from v6 with no bumpers)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:24:11 +0000 (13:24 +0000)]
fairphone-case: switch to no bumpers
And adjust camera_pos_* so the resulting camera pos from the case TR
corner is the same.
This will let us adjust the camera window with a non-rubberised test
piece (v6).
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:22:37 +0000 (13:22 +0000)]
fairphone-case: change some debug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:13:21 +0000 (13:13 +0000)]
fairphone-case: turn "bumpers" into "bumper" and fix off-by- x2 bugs
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:07:05 +0000 (13:07 +0000)]
fairphone-case: add "bumpers" into camera pos (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:03:59 +0000 (13:03 +0000)]
fairphone-case: adjust "bumpers" comment
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 13:02:55 +0000 (13:02 +0000)]
fairphone-case: introduce "bumpers" (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 12:53:29 +0000 (12:53 +0000)]
fairphone-case: introduce "phone" (nfc)
This is part of letting us separate out rubber bumpers etc., which
change the phone size but also move the features of the phone a bit.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 12:19:08 +0000 (12:19 +0000)]
fairphone-case: fix button cover
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 12:15:03 +0000 (12:15 +0000)]
fairphone-case: refactor tests (nfc)
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:40:24 +0000 (01:40 +0000)]
fairphone-case: Add TestLidByCameraPrint
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
Ian Jackson [Sun, 21 Jan 2018 01:32:33 +0000 (01:32 +0000)]
fairphone-case: Button cover, fix a bug
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
~ianmdlvl / reprap-play.git / log