1 Setting up a standalone DisOrder client
2 =======================================
4 It is possible to control the DisOrder server over the network if the server
5 has a 'listen PORT' directive in its configuration file.
7 There is currently no standard DisOrder port number.
10 1. Configure the software with --without-server (and, optionally,
11 --without-python) and build and install it. Set up a stub config in
12 /etc/disorder/config (or /usr/local/etc/disorder/config if you didn't
13 set a nondefault --prefix) with the following contents:
17 where PORT is the same as 'listen PORT' on the server.
20 2. Copy the password file for each user to /etc/disorder/config.USER,
25 Alternatvely, each user can use ~/.disorder/passwd, with the same contents. If
26 the DisOrder username differs from the local username then use a 'username'
30 3. Test by issuing 'disorder playing'.
33 4. Run 'disobedience' for the GUI client.
36 The web interface could in principle be made to work on a separate
37 machine from the main server, though it is unlikely to be efficient
38 and at the moment it is built whenever the server is, so you will have
39 to unpick them a bit yourself if you wish to do this.