5 LAYOUTOPTS_ALL= -ep=*Cm
6 LAYOUTOPTS= -E=*$(E_TRACK) $(LAYOUTOPTS_ALL)
7 LAYOUTOPTS_PHYS= -S1.0 $(LAYOUTOPTS) '-e*A'
8 XLAYOUTOPTS_LAYER= -e'=5AN' -E'*~=5rsm' -e'p~=5r' -e'*~=9C' -e'*=*l'
11 LAYERS_PS= $(addsuffix .ps, $(LAYERS_LS))
12 LAYERS_L= $(addprefix ours-l, $(LAYERS_PS))
13 LAYERS_E= $(addprefix ours-e, $(LAYERS_PS))
14 LAYERS= $(LAYERS_L) $(LAYERS_E)
16 LPAGES= $(foreach x, 0 1 2 3 4 5 6, $(foreach y, 1 2 3 4 5, ours-p0-$xx$y.ps))
18 default: ours-a.ps ours-al.ps parts.ps
22 all: default layers circuit.bom bulkres.bom divider-tables \
25 o=>$@.new && mv -f $@.new $@
27 CIRCUITPARTS= control.partlist circuit.partlist
28 BULKRESPARTS= bulkres-select.partlist bulkres-items.partlist
30 picprogs: flasher.hex flash-all.hex
32 netlists: reversers.net
34 long2splita4=pstops -pa3 -d '0(0cm,-1cm)+0(-9cm,-10cm)' <$< $o
36 # print from pcb(1) as follows:
37 # File / Print Layout / ...
38 # select media and offsets: A3
41 # (If `... exists, use anyway?', Sequence OK)
43 pcboprints: reversers.oprint-back.ps \
44 reversers.oprint-front.ps \
45 reversers.oprint-fab.ps \
46 reversers.oprint-frontsilk.ps \
47 reversers.oprint-assembly.ps
49 %.oprint-back.ps: %.pcb.output_back.ps
52 %.oprint-front.ps: %.pcb.output_front.ps
55 %.oprint-fab.ps: %.pcb.output_fab.ps
58 %.oprint-frontsilk.ps: %.pcb.output_frontsilk.ps
61 %.oprint-assembly.ps: %.pcb.output_assembly.ps
62 pstops -pa3 '0@1.5(-12cm,-29cm)' <$< $o
64 # these outputs from pstops are really A4 and can be viewed nicely with
65 # for f in *.oprint-*.ps; do gv -scale -1 -media A4 $f; done
68 sed -e '/^\#/d' <$< $o
70 %.net-info: %.net-spec netlist-expand
71 ./netlist-expand $< $o
73 %.net-spec: generate-netspec.pl
79 circuit.bom: farnell-find $(CIRCUITPARTS)
80 ./farnell-find bom $(CIRCUITPARTS) $o
82 bulkres.bom: farnell-find $(BULKRESPARTS)
83 ./farnell-find bom $(BULKRESPARTS) $o
85 bulkres-select.partlist: bulkres-select-gen.pl
88 bulkres-items.suggest:
89 cat bulkres-searchout*[0-9] | ./farnell-resistor-convert.pl $o
91 bulkres-items.descs: bulkres-items.suggest
92 xargs ./farnell-find describe <$< $o
94 bulkres-items.partlist:
95 ./farnell-resistor-convert.pl <bulkres-items.descs MRS25 std $o
97 divider-table.txt: divider-table.pl
100 divider-tables: divider-table.ps divider-table.txt
102 divider-table.ps: divider-table.txt Makefile
103 a2ps -o- -R -1 --borders no -B -L"$$(wc -l <$<)" -l158 \
104 --center-title='E24 resistor ratios and logarithms' <$< $o
106 %.d4: %.m4 $(M4INCS) Makefile
110 ./layout <$< $(LAYOUTOPTS) '-E*l' $o
113 ./layout <$< $(LAYOUTOPTS) '-e*C' '-ep=rm' $o
116 ./layout -S1.0 <$< $(LAYOUTOPTS) '-e*A' '-ep=rm' $o
118 ours-l%.ps: ours.d4 layout
119 ./layout <$< -l$* $(LAYOUTOPTS) $(XLAYOUTOPTS_LAYER) $o
121 ours-e%.ps: ours.d4 layout
122 ./layout <$< -l$* -E'=*aRsclMno' \
123 -e'p=*rm' -e'=5RN' -E'*~=5rsm' -e'p~=5r' -e'*=*l' $o
125 ours-p%.ps: ours.d4 layout
126 ./layout <$< -l$$(printf %s "$*" | sed -e 's/-/ -P/') \
127 $(LAYOUTOPTS_PHYS) $(XLAYOUTOPTS_LAYER) $o
129 parts.ps: showlib.d4 layout
130 ./layout <$< $(LAYOUTOPTS_ALL) $o
133 -rm -f -- *.d4 *.ps farn.* *~ *.new
134 -rm -f bulkres-*.partlist bulkres-items.suggest *.bom
135 -rm -f t,*.gnuplot-data t,*.gnuplot-cmd t,gnuplot-fifo
136 -rm -f t,gnuplots.sh reversers.net reversers.net-info
137 -rm -f flasher.hex flasher.cod flasher.lst
139 .PRECIOUS: reversers.net-info