Single
-2
1200 2
+2 5 0 1 0 -1 60 -1 -1 0.000 0 0 -1 0 0 5
+ 0 sewing-table-end-profile-photo.jpg
+ 2655 6615 23743 6615 23743 12787 2655 12787 2655 6615
2 1 0 1 1 7 50 -1 -1 0.000 0 0 -1 0 0 2
3780 10170 22635 9990
+2 1 0 2 9 7 50 -1 -1 0.000 0 0 -1 0 0 2
+ 22671 9881 22587 6522
2 1 0 3 14 7 50 -1 -1 0.000 0 0 -1 0 0 2
3780 8137 22635 7957
2 1 0 2 9 7 50 -1 -1 0.000 0 0 -1 0 0 2
- 22671 9881 22587 6522
+ 4090 9278 4034 6610
2 2 0 2 28 7 50 -1 -1 0.000 0 0 -1 0 0 5
1818 8008 5248 8008 5248 14648 1818 14648 1818 8008
-2 1 0 2 9 7 50 -1 -1 0.000 0 0 -1 0 0 2
- 4090 9278 4034 6610
-2 5 0 1 0 -1 60 -1 -1 0.000 0 0 -1 0 0 5
- 0 sewing-table-end-profile-photo.jpg
- 2655 6615 23743 6615 23743 12787 2655 12787 2655 6615
3 1 0 1 6 7 40 -1 -1 0.000 0 0 0 17
8544 8080 12341 8071 16290 7965 19845 7830 22214 7727 22560 7582
22605 7370 22539 6869 22548 6611 12555 4725 4252 5873 4101 6534
module Machine_NewEndProfile(){
// figures copied out of xfig edit boxes
// best not to edit the posbox size if poss - just move it
-// posbox = 10 * ([7.2333,-14.1267] - [-16.2289,40.0289]); // box, Green
- refline = 10 * ([-6.2400,13.5600] - [-2.4467,28.2556]); // line, Blue
+ posboxs = 10 * [[4.0400,17.7956], [11.6622,32.5511]]; // box, Pink3
+ refline = 10 * ([8.4000,22.6000] - [50.3000,22.2000]); // line, Blue
refline_mm = 10 * (11 - 2.5);
+ sidelines = 10 * [[[9.0889,20.6178], [8.9644,14.6889]],
+ [[50.3800,21.9578], [50.1933,14.4933]]]; // lines, Blue3
+ baseline = 10 * [[8.4000,18.0822], [50.3000,17.6822]]; // line, Green2
+
+ posbox = [min(posboxs[0][0],posboxs[1][0]),
+ max(posboxs[0][1],posboxs[1][1])];
+
+m4_define(`MNEP_ELP',
+ `line_intersection_2d(baseline[0],baseline[1],
+ sidelines[$1][0],sidelines[$1][1])')
+ endline = [MNEP_ELP(0),MNEP_ELP(1)];
+ echo("PBS",posboxs,"PB",posbox,"SL00",sidelines[0][0]);
+
+ //%translate(posbox) square(10);
+
+ rot = atan2(-refline[1], -refline[0]);
+ sc = refline_mm / vectorlen2d(refline);
+ sh = (0.5 * (endline[0] + endline[1])) - posbox;
// scaleline = 10 * dist2d([-1.1911,-20.4800], [-11.2600,4.0578]); // Green2
// scaleline_mm = 12+5+10+5+3;
// sh = -[abs(posbox[0]), abs(posbox[1])];
// rot = atan2(-sideline[0], sideline[1]);
// sc = scaleline_mm / scaleline;
//echo("SH",sh,rot,sc);
-// scale(sc) rotate(rot) translate(sh){
+ scale(sc) rotate(rot) translate(-[sh[0],-sh[1]]){
+
+ mirror([0,1]){
+ //%translate(1 * (posboxs[0] - posbox)) square(50);
+ //%translate(1 * (posboxs[1] - posbox)) square(50);
+ %translate(1 * (baseline[0] - posbox)) square([50,10]);
+
+ %translate(1 * (endline[0] - posbox)) square([50,10]);
+ %translate(1 * (endline[1] - posbox)) square([50,10]);
+
+// %translate(1 * (sidelines[0][0] - posbox)) square([10,50]);
+// %translate(1 * (sidelines[0][1] - posbox)) square([10,50]);
+// %translate(1 * (sidelines[1][0] - posbox)) square([10,50]);
+// %translate(1 * (sidelines[1][1] - posbox)) square([10,50]);
+ }
+
import("sewing-table-end-profile.dxf", convexity=10); // spline, Pink3
-// }
+ }
}
module Machine_NewRearCurve(){