configs: better bed temp, seems to have done away with warping in warptest

diff --git a/pronsolerc b/pronsolerc
index 8741717a0e60c44ff69290dae62b30a8b9d9ccfc..8399e6d909414819e84a23c1ed4496badd44d592 100644 (file)
--- a/pronsolerc
+++ b/pronsolerc
@@ -11,7 +11,7 @@ button 9 "BR" G1 X15 Y15 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000

-set last_bed_temperature 105.0
+set last_bed_temperature 65.0

 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000
 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 630f67f4641362dab40ca16d109106d20c8d7e90..e7e712fe86e06a70f9b09be92aa7ab6e86f2d219 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
 # generated by Slic3r 0.9.1 on Sun Aug 12 23:02:53 2012
 acceleration = 0
 bed_size = 140,140
 # generated by Slic3r 0.9.1 on Sun Aug 12 23:02:53 2012
 acceleration = 0
 bed_size = 140,140

-bed_temperature = 100
+bed_temperature = 80

 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60


@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear
 fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear

-first_layer_bed_temperature = 105
+first_layer_bed_temperature = 65

 first_layer_extrusion_width = 150%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_extrusion_width = 150%
 first_layer_height = 0.4
 first_layer_speed = 30%