slic3r tuning: produces better output but hole is much too small

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 96c3bbf02216a79d03bb0d12fb1b9bb5ac7e3ec4..541e48a0644e133e59bb7f503eb56632e9247bc1 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.1 on Fri Aug 10 23:07:52 2012
+# generated by Slic3r 0.9.1 on Sat Aug 11 00:01:02 2012

 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60


@@ -28,7 +28,7 @@ fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear
 first_layer_bed_temperature = 65
 fill_density = 0.4
 fill_pattern = rectilinear
 first_layer_bed_temperature = 65

-first_layer_extrusion_width = 200%
+first_layer_extrusion_width = 150%

 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 195
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_temperature = 195


@@ -47,11 +47,11 @@ max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 notes = 
 min_fan_speed = 35
 min_print_speed = 10
 notes = 

-nozzle_diameter = 0.58
+nozzle_diameter = 0.59

 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1

-perimeter_extrusion_width = 0
+perimeter_extrusion_width = 100%

 perimeter_speed = 30
 perimeters = 3
 post_process = 
 perimeter_speed = 30
 perimeters = 3
 post_process =