chiark / gitweb /
Merge gregkh@ehlo.org:/home/kay/public_html/pub/scm/linux/hotplug/udev-kay
authorGreg Kroah-Hartman <gregkh@suse.de>
Tue, 2 Aug 2005 20:07:30 +0000 (13:07 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 2 Aug 2005 20:07:30 +0000 (13:07 -0700)
etc/udev/gentoo/udev.rules
extras/path_id [new file with mode: 0755]

index 572e5c8..0c96969 100644 (file)
@@ -1,16 +1,33 @@
-# /etc/udev/udev.rules:  device naming rules for udev
+# /etc/udev/rules/50-udev.rules:  device naming rules for udev
 #
-# Gentoo specific rules, based a bit on devfs rules, but much simpler.
+# Gentoo specific rules
 #
 # There are a number of modifiers that are allowed to be used in some of the
 # fields.  See the udev man page for a full description of them.
-
-
-###########################################################
 #
-# For devfs similar /dev layout (neater)
+# Try not to modify this file, if you wish to change things, create a new rule
+# file that can be run before this one.
 #
-###########################################################
+
+
+# console
+KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",    OPTIONS="last_rule"
+KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",    OPTIONS="last_rule"
+KERNEL=="vcs*",                 NAME="%k", GROUP="tty",                        OPTIONS="last_rule"
+KERNEL=="vcsa*",                NAME="%k", GROUP="tty",                        OPTIONS="last_rule"
+KERNEL=="tty",                  NAME="%k", GROUP="tty", MODE="0666",   OPTIONS="last_rule"
+KERNEL=="tty[0-9]",             NAME="%k", GROUP="tty",                        OPTIONS="last_rule"
+KERNEL=="tty[0-9][0-9]",        NAME="%k", GROUP="tty",                        OPTIONS="last_rule"
+KERNEL=="console",             NAME="%k", GROUP="tty", MODE="0600"
+KERNEL=="ptmx",                        NAME="%k", GROUP="tty", MODE="0666"
+
+# tty devices
+KERNEL=="ttyS[0-9]*",  NAME="tts/%n", SYMLINK+="%k", GROUP="tty"
+KERNEL=="ttyUSB[0-9]*",        NAME="tts/USB%n", GROUP="tty", MODE="0660"
+KERNEL=="ippp0",       NAME="%k", GROUP="tty"
+KERNEL=="isdn*"                NAME="%k", GROUP="tty"
+KERNEL=="dcbri*",      NAME="%k", GROUP="tty"
+KERNEL=="ircomm*",     NAME="%k", GROUP="tty"
 
 # all block devices
 SUBSYSTEM=="block", GROUP="disk"
@@ -141,28 +158,6 @@ KERNEL=="mixer[0-9]*",             NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
 KERNEL=="sequencer",           NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
 KERNEL=="sequencer[0-9]*",     NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
 
-# tty devices
-KERNEL=="console",     NAME="%k", GROUP="tty", MODE="0600"
-KERNEL=="tty",         NAME="%k", GROUP="tty", MODE="0666"
-KERNEL=="tty[0-9]*",   NAME="vc/%n", SYMLINK+="%k", GROUP="tty"
-KERNEL=="ttyS[0-9]*",  NAME="tts/%n", SYMLINK+="%k", GROUP="tty"
-KERNEL=="ttyUSB[0-9]*",        NAME="tts/USB%n", GROUP="tty", MODE="0660"
-KERNEL=="ippp0",       NAME="%k", GROUP="tty"
-KERNEL=="isdn*"                NAME="%k", GROUP="tty"
-KERNEL=="dcbri*",      NAME="%k", GROUP="tty"
-KERNEL=="ircomm*",     NAME="%k", GROUP="tty"
-
-# pty devices
-KERNEL=="ptmx",                        NAME="%k", GROUP="tty", MODE="0666"
-KERNEL=="pty[p-za-e][0-9a-f]*",        NAME="pty/m%n", SYMLINK+="%k", GROUP="tty"
-KERNEL=="tty[p-za-e][0-9a-f]*",        NAME="pty/s%n", SYMLINK+="%k", GROUP="tty"
-
-# vc devices
-KERNEL=="vcs",         NAME="vcc/0",   SYMLINK+="%k", GROUP="tty"
-KERNEL=="vcs[0-9]*",   NAME="vcc/%n",  SYMLINK+="%k", GROUP="tty"
-KERNEL=="vcsa",                NAME="vcc/a0",  SYMLINK+="%k", GROUP="tty"
-KERNEL=="vcsa[0-9]*",  NAME="vcc/a%n", SYMLINK+="%k", GROUP="tty"
-
 # memory devices
 KERNEL=="random",      NAME="%k", MODE="0666"
 KERNEL=="urandom",     NAME="%k", MODE="0444"
@@ -248,6 +243,38 @@ KERNEL=="issm*",   NAME="infiniband/%k"
 # tpm devices
 KERNEL=="tpm*",        NAME="%k", OWNER="tss", GROUP="tss", MODE="0600"
 
+# block device disk id's
+SUBSYSTEM=="block", GROUP="disk", MODE="0640"
+KERNEL=="hd*[!0-9]", ACTION=="add", IMPORT="/etc/udev/scripts/ata_id --export $tempnode"
+KERNEL=="hd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="$env{ID_TYPE}/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}"
+KERNEL=="hd*[0-9]", ACTION=="add", IMPORT{parent}=="ID_*", SYMLINK+="$env{ID_TYPE}/by-id/ata-$env{ID_MODEL}_$env{ID_SERIAL}-part%n"
+
+KERNEL=="sd*[!0-9]", ACTION=="add", SYSFS{ieee1394_id}=="*", IMPORT="/bin/echo -e 'ID_SERIAL=$sysfs{ieee1394_id}\nID_BUS=ieee1394\nID_TYPE=disk'"
+KERNEL=="sd*[!0-9]", ACTION=="add", ENV{ID_SERIAL}=="", IMPORT="/etc/udev/scripts/usb_id -x"
+KERNEL=="sd*[!0-9]", ACTION=="add", ENV{ID_SERIAL}=="", IMPORT="/etc/udev/scripts/scsi_id -g -x -s %p"
+KERNEL=="sd*[!0-9]", ACTION=="add", ENV{ID_SERIAL}=="", IMPORT="/etc/udev/scripts/scsi_id -g -x -a -s %p"
+KERNEL=="sd*[!0-9]", ACTION=="add", ENV{ID_SERIAL}=="?*", SYMLINK+="$env{ID_TYPE}/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="sd*[0-9]", ACTION=="add", IMPORT{parent}=="ID_*"
+KERNEL=="sd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="$env{ID_TYPE}/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
+
+# Skip id for ram / loop / fd
+SUBSYSTEM=="block", KERNEL=="ram*", GOTO="no_volume_id"
+SUBSYSTEM=="block", KERNEL=="loop*", GOTO="no_volume_id"
+SUBSYSTEM=="block", KERNEL=="fd*", GOTO="no_volume_id"
+
+SUBSYSTEM=="block", KERNEL=="*[!0-9]", ACTION=="add", ENV{ID_TYPE}=="?*", IMPORT="/etc/udev/scripts/path_id %p", SYMLINK+="$env{ID_TYPE}/by-path/$env{ID_PATH}"
+SUBSYSTEM=="block", KERNEL=="*[0-9]", ACTION=="add", IMPORT{parent}=="ID_*"
+SUBSYSTEM=="block", KERNEL=="*[0-9]", ACTION=="add", ENV{ID_PATH}=="?*", SYMLINK+="$env{ID_TYPE}/by-path/$env{ID_PATH}-part%n"
+
+# volume-label/uuid
+SUBSYSTEM=="block", KERNEL=="*[!0-9]", SYSFS{removable}=="1", GOTO="no_volume_id"
+SUBSYSTEM=="block", KERNEL=="sr*", GOTO="no_volume_id"
+SUBSYSTEM=="block", KERNEL=="*[0-9]", ACTION=="add", IMPORT="/etc/udev/scripts/vol_id --export $tempnode"
+SUBSYSTEM=="block", KERNEL=="*[0-9]", ENV{ID_FS_UUID}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID}"
+SUBSYSTEM=="block", KERNEL=="*[0-9]", ENV{ID_FS_LABEL_SAFE}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_SAFE}"
+SUBSYSTEM=="block", LABEL="no_volume_id"
+
+
 # be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems
 # run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart
 ENV{UDEVD_EVENT}=="1", RUN+="/sbin/udev_run_hotplugd"
@@ -255,3 +282,5 @@ ENV{UDEVD_EVENT}=="1", RUN+="/sbin/udev_run_hotplugd"
 # always run /etc/dev.d/ stuff for now.
 RUN+="/sbin/udev_run_devd"
 
+# debugging monitor
+RUN+="socket:/org/kernel/udev/monitor"
diff --git a/extras/path_id b/extras/path_id
new file mode 100755 (executable)
index 0000000..8391f2e
--- /dev/null
@@ -0,0 +1,390 @@
+#!/bin/sh
+#set -x
+
+# this script should provide the shortest possible unique hardware path 
+# to a block device
+#
+
+# Horrible script. Handle with extreme care.
+
+# to be called from udev
+# DEVPATH=/block/sda/sda3 $0  (or similar)
+# $0 /block/sda
+# $0 /sys/block/sda
+
+# example for all:
+# for i in `find /sys/block -name dev` ;do DEVPATH="`echo $i | sed -e 's@^/sys\|/dev@@g'`" $0 ; done
+
+# examples:
+# SCSI cdrom
+# /block/sr0 -> /devices/pci0002:30/0002:30:0c.0/host0/0:0:1:0
+# result: pci-0002:30:0c.0-scsi-0:0:1:0
+# SCSI disk
+# /block/sda -> /devices/pci0002:30/0002:30:0c.0/host0/0:0:4:0
+# result: pci-0002:30:0c.0-scsi-0:0:4:0 
+# SATA disk, 4 channels per controller
+# /block/sda -> /devices/pci0001:00/0001:00:07.0/0001:05:0c.0/host0/0:0:0:0
+# result: pci-0001:05:0c.0-scsi-0:0:0:0
+# IDE disk
+# /block/hda -> /devices/pci0002:02/0002:02:0d.0/ide0/0.0
+# result: pci-0002:02:0d.0-ide-0.0
+# IDE cdrom on a Mac ASIC:
+# /block/hdc -> /devices/pci0001:01/0001:01:17.0/0.80000000:mac-io/0.00020000:ata-3/ide1/1.0
+# result: mac-io_ata-3_master
+# IDE cdrom on a Mac ASIC, with ide-scsi:
+# /block/sr0 -> /devices/pci0001:01/0001:01:17.0/0.80000000:mac-io/0.0001f000:ata-4/ide0/0.1/host2/2:0:0:0
+# result: mac-io_ata-4_slave
+
+# USB CDrom drive without 'serial' number:
+# reusing 'product' and 'manufacturer' string, if available
+# /block/sr0 -> /devices/pci0001:00/0001:00:04.0/0001:02:0b.0/usb4/4-2/4-2:1.0/host4/4:0:0:0
+# result: usb-storage-odd-Freecom-USIDERev930:0:0:0
+
+# devices may have several interfaces on one PCI device, like IDE:
+# pci-0001:00:04.0_ide1-master
+# pci-0001:00:04.0_ide2-master
+# pci-0001:00:04.0_ide2-slave
+# they are marked as ports, it is expected that the driver shows
+# ide1 even if there is nothing connected to either master or slave
+# interface
+#
+# match order is important.
+# first IDE to find ide-scsi devices.
+# then SCSI
+# first usb-storage
+# then firewire sbp2
+# then the rest
+
+PATH=/lib/klibc/bin #/usr:/usr/sbin:/usr/bin:/sbin:/bin
+SYSFS=/sys
+export PATH
+RESULT=1
+CDROM=
+TYPE=
+OPWD="`pwd`"
+# Check for 'pwd -P'
+if $(pwd -P > /dev/null 2>&1); then
+    pwd_cmd="pwd -P"
+else
+    pwd_cmd="pwd"
+fi
+full_sysfs_class_path=
+full_sysfs_device_path=
+
+if [ -z "$DEVPATH" -a -z "$1" ] ; then
+    exit 1
+fi
+
+if [ -z "$DEVPATH" ] ; then
+    case "$1" in
+       $SYSFS/*)
+           DEVPATH="${1#$SYSFS}"
+           ;;
+       *)
+           DEVPATH=$1
+           ;;
+    esac
+fi
+
+if [ ! -d $SYSFS$DEVPATH ] ; then
+    exit 1
+fi
+if [ ! -f $SYSFS$DEVPATH/dev ] ; then
+    exit 1
+fi
+
+case "$DEVPATH" in
+    /block/*)
+       TYPE=block
+       ;;
+    /class/*)
+       TYPE="${DEVPATH#/class/}"
+       TYPE="${TYPE%%/*}"
+       ;;
+    *)
+       exit 1
+       ;;
+esac
+       
+#
+##
+#
+
+get_port () {
+    local type offset port
+    type=$1
+    offset=$2
+    for i in $type[0-9]* ; do
+       : i $i
+       port="${i#$type}"
+       if [ "$port" -lt "$offset" ] ; then offset=$port ; fi
+    done
+    if [ "$port" != "0" ] ; then
+       echo $(($2 - $offset))
+    fi
+}
+
+handle_block_ide () {
+: handle_block_ide $*
+       local DEV=$1
+       local port idedev idecontroller
+       # IDE
+       : DEV $DEV
+       d=$DEV
+       case "$DEV" in
+       # remove ide-scsi part, leave only channel info
+               */ide[0-9]*/host[0-9]*)
+               while [ ! -z "$d" ] ; do
+                       case "$d" in
+                               */host[0-9]*)
+                               d="${d%/*}"
+                               continue
+                               ;;
+                               *)
+                               break
+                               ;;
+                       esac
+               done
+               ;;
+       esac
+       idedev=$d
+       while [ ! -z "$d" ] ; do
+               case "$d" in
+                       */ide[0-9]*)
+                       port="${d##*/}"
+                       d="${d%/*}"
+                       continue
+                       ;;
+                       *)
+                       break
+                       ;;
+               esac
+       done
+       idecontroller=$d
+       # port info if the controller has more than one interface
+       port="${port#ide}"
+       : port $port d $d
+       : idedev $idedev kernel_port $port
+       case "${idedev##*.}" in
+                0)
+                channel=0
+                ;;
+                1)
+                channel=1
+                ;;
+                *)
+                echo "Error: $idedev is neither master or slave" >&2
+       esac
+       case "$d" in
+               *:mac-io/*)
+               : mac-io: $d
+               d="`echo $d | sed -e 's@^.*:mac-io[^:]\+:\([^/]\+\).*@mac-io_\1@'`"
+               ;;
+               /sys/devices)
+               # PCMCIA devices
+               ifname=${full_sysfs_class_path##*/}
+               set -- `sed -n "/$ifname/p" /var/lib/pcmcia/stab`
+               d="pcmcia-$1"
+               ;;
+               *)
+               d="pci-${d##*/}"
+               # d="`echo $d | sed -e 's@^.*/\([^/]\{1,\}\)/.@pci-\1@'`"
+               ;;
+       esac
+
+       cd $idecontroller
+       port="`get_port ide $port`"
+       cd "$OPWD"
+       :  hardware_port $port
+       if [ -z "$port" ] ; then
+               d="${d}-ide-0:$channel"
+       else
+               d="${d}-ide-${port}:$channel"
+       fi
+          
+       RESULT=0
+}
+
+handle_block_scsi () {
+: handle_block_scsi $*
+       local DEV=$1
+       local cil controller_port controller_dev
+       # SCSI device
+       cil="${DEV##*/}"
+       cil="${cil#*:}"
+       controller_dev=$DEV
+       while [ ! -z "$controller_dev" ] ; do
+               case "$controller_dev" in
+                       */host[0-9]*)
+                       controller_port=$controller_dev
+                       controller_dev="${controller_dev%/*}"
+                       ;;
+                       *) break ;;
+               esac
+       done
+       : controller_dev $controller_dev
+       : controller_port $controller_port
+       # a host controller may have more than one interface/port
+       controller_port="${controller_port##*/}"
+       controller_port="${controller_port##host}"
+       #
+       case "$controller_dev" in
+               # grand central, old powermacs
+               *:gc/*)
+               adapter="`echo $controller_dev |  sed -e 's@/[^/]\{1,\}$@@;s@^.*/@@;s@^.*:@@'`"
+               bus="gc"
+               ;;
+               *)
+               adapter="${controller_dev##*/}"
+               bus="pci"
+               ;;
+       esac
+       cd "$controller_dev"
+       controller_port="`get_port host $controller_port`"
+       cd "$OPWD"
+       d="$bus-$adapter"
+       if [ -z "$controller_port" ] ; then
+               controller_port=0
+       fi
+       d="${d}-scsi-${controller_port}:${cil}"
+       RESULT=0
+}
+
+handle_block_usb_storage () {
+: handle_block_usb_storage $*
+       local DEV=$1
+       cil="${DEV##*/}"
+       cil="${cil#*:}"
+       controller_dev=$DEV
+       while [ ! -z "$controller_dev" ] ; do
+               case "$controller_dev" in
+                       */host[0-9]*)
+                       controller_dev="${controller_dev%/*}"
+                       ;;
+                       *) break ;;
+               esac
+       done
+       : controller_dev $controller_dev
+       #
+       # usb-storage devs have a serial number, hopefully unique
+       serial=
+       if [ -f $controller_dev/../serial ] ; then
+               serial="`sed -e 's@^[ -]\{1,\}\|[ -]\{1,\}$@@g;s@[^abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ-_0123456789]@@g' < $controller_dev/../serial`"
+               : serial XXX_${serial}_XXX
+               d="usb-$serial"
+               serial="`echo $serial | sed -e 's@[ 0]\{1,\}@@g'`"
+       fi
+       if [ -z "$serial" ] ; then
+               # no serial, broken device
+               # has eventually binary junk in vpd
+               identifier=
+               if [ -f $controller_dev/../product ] ; then
+               product="`sed -e 's@^[ -]\{1,\}\|[ -]\{1,\}$@@g;s@[^abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ-_0123456789]@@g' < $controller_dev/../product`"
+               fi
+               if [ -f $controller_dev/../manufacturer ] ; then
+               manufacturer="`sed -e 's@^[ -]\{1,\}\|[ -]\{1,\}$@@g;s@[^abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ-_0123456789]@@g' < $controller_dev/../manufacturer`"
+               fi
+               if [ -z "$product" -o -z "$manufacturer" ] ; then
+                       read idvendor < $controller_dev/../idVendor
+                       read idproduct < $controller_dev/../idProduct
+                       identifier="0x${idvendor}-0x${idproduct}"
+               else
+                       identifier="${manufacturer}-${product}"
+               fi
+               d="usb-${identifier}"
+       fi
+       d="$d:$cil"
+       RESULT=0
+
+
+}
+
+handle_block () {
+    full_sysfs_class_path="$SYSFS$DEVPATH"
+    if [ ! -f $full_sysfs_class_path/dev ] ; then return ; fi
+    # the main device has (hopefully) a symlink to the real device
+    # a partition is a subdir of the main (raw) device
+    if [ ! -L $full_sysfs_class_path/device ] ; then
+       if [ -f $full_sysfs_class_path/range ] ; then return ; fi
+       full_sysfs_class_path="${full_sysfs_class_path%/*}"
+       : full_sysfs_class_path "$full_sysfs_class_path"
+       if [ ! -L $full_sysfs_class_path/device -o ! -f $full_sysfs_class_path/dev ] ; then
+           return
+       fi
+    fi
+    cd $full_sysfs_class_path/device
+    full_sysfs_device_path="`$pwd_cmd`"
+    cd "$OPWD"
+    D=$full_sysfs_device_path
+    case "$D" in
+       */ide[0-9]/[0-9].[0-9]*|*/ide[0-9][0-9]/[0-9][0-9].[0-9]*)
+       handle_block_ide "$D"
+       ;;
+       */usb[0-9]*/[0-9]*/host[0-9]*/[0-9]*:[0-9]*:[0-9]*:[0-9]*)
+       handle_block_usb_storage "$D"
+       ;;
+       */css0/*)
+       if [ -r $full_sysfs_device_path/wwpn ]; then
+           read wwpn < $full_sysfs_device_path/wwpn
+       fi
+       if [ -r $full_sysfs_device_path/fcp_lun ]; then
+           read lun < $full_sysfs_device_path/fcp_lun
+       fi
+       if [ -r $full_sysfs_device_path/hba_id ]; then
+           read bus_id < $full_sysfs_device_path/hba_id
+       fi
+       if [ "$bus_id" -a "$wwpn" -a "$lun" ]; then
+           # S/390 zfcp adapter
+           d="ccw-$bus_id-zfcp-$wwpn:$lun"
+           RESULT=0
+       else
+           # DASD devices
+           bus="ccw"
+           adapter=${D##*/}
+           d="$bus-$adapter"
+           RESULT=0
+       fi
+       ;;
+       */host[0-9]*/[0-9]*:[0-9]*:[0-9]*:[0-9]*)
+       # check for ieee1394 sbp2 
+       if test -f $D/ieee1394_id ; then
+           read ieee1394_id < $D/ieee1394_id
+           d="`echo ieee1394-${ieee1394_id} | sed -e 's@:@-@g'`"
+           RESULT=0
+       else
+           handle_block_scsi "$D"
+       fi
+       ;;
+
+       *)
+       : not handled
+       RESULT=1
+       return
+
+       ;;
+    esac
+    # look for a partition
+    if [ "$full_sysfs_class_path" != "$SYSFS$DEVPATH" ] ; then
+       dp="`echo $SYSFS$DEVPATH | sed -e 's@^/.*/@@;s@^[^0-9]\{1,\}@@;s@.*_@@'`"
+       case "$d" in
+           *[0-9])
+           d="${d}p${dp}"
+           ;;
+           *)
+               d="${d}${dp}"
+               ;;
+       esac
+    fi
+    # done
+    echo "ID_PATH=$d"
+}
+
+case "$TYPE" in
+       block)
+       handle_block
+       ;;
+       *)
+       RESULT=1
+       ;;
+esac
+exit $RESULT