rules: Gentoo update

diff --git a/etc/udev/gentoo/50-udev.rules b/etc/udev/gentoo/50-udev.rules
index ddabe1acc6e76c7c843e9c40d3737a0d40c3eb5c..dd329712ddb950985cd4642749e7dda4f33ef8c7 100644 (file)
--- a/etc/udev/gentoo/50-udev.rules
+++ b/etc/udev/gentoo/50-udev.rules
@@ -248,6 +248,7 @@ SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/u
 SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
        NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", GROUP="usb", MODE="0664" 
 
 SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
        NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", GROUP="usb", MODE="0664" 
 

+# Timeouts for scsi devices

 # Setting timeout for tape-devices (type 1) to 900 seconds
 # and 60 seconds for device types 0, 7 and 14
 # if you need timeouts for other devices add a similar rule
 # Setting timeout for tape-devices (type 1) to 900 seconds
 # and 60 seconds for device types 0, 7 and 14
 # if you need timeouts for other devices add a similar rule


@@ -255,53 +256,8 @@ SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
 SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="0|7|14", ATTR{timeout}="60"
 SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="1", ATTR{timeout}="900"
 
 SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="0|7|14", ATTR{timeout}="60"
 SUBSYSTEM=="scsi", KERNEL=="[0-9]*:[0-9]*", ACTION=="add", ATTR{type}=="1", ATTR{timeout}="900"
 

-# Module autoloading
-ACTION!="add", GOTO="hotplug_no_add_event"
-
-# check if the device has already been claimed by a driver
-ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_load_end"
-
-# this driver is broken and should not be loaded automatically
-SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_load_end"
-
-# Autoload modules that lack aliases but have them defined inutoload modules
-ENV{MODALIAS}=="?*", RUN{ignore_error}+="modprobe.sh $env{MODALIAS}"
-
-# /etc/modprobe.conf.
-SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/modprobe.sh pnp:d$$id; done < /sys$devpath/id'"
-# needed aliases are defined in /etc/modprobe.d/pnp-aliases
-
-
-SUBSYSTEM=="i2o", RUN+="modprobe.sh i2o_block"
-SUBSYSTEM=="mmc", RUN+="modprobe.sh mmc_block"
-
-# Parts taken from redhat-rules
-# sd:           0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
-# sr:           4 TYPE_WORM, 5 TYPE_ROM
-# st/osst:      1 TYPE_TAPE
-
-# Load driver for scsi-device
-SUBSYSTEM!="scsi_device", GOTO="hotplug_scsi_end"
-ATTRS{type}=="?*",     TEST!="[module/sg]", RUN+="modprobe.sh sg"
-ATTRS{type}=="0|7|14", RUN+="modprobe.sh sd_mod"
-ATTRS{type}=="4|5",    RUN+="modprobe.sh sr_mod"
-ATTRS{type}=="8",      RUN+="modprobe.sh ch"
-
-ATTRS{type}=="1", ENV{ID_SCSI_TAPE_DRIVER}="st"
-ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
-       ATTRS{model}!="ADR*", ENV{ID_SCSI_TAPE_DRIVER}="osst"
-ENV{ID_SCSI_TAPE_DRIVER}=="?*", RUN+="modprobe.sh $env{ID_SCSI_TAPE_DRIVER}"
-LABEL="hotplug_scsi_end"
-
-
-SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="modprobe.sh ide-scsi"
-
-LABEL="hotplug_load_end"
-

 
 # Load firmware
 
 # Load firmware

-SUBSYSTEM=="firmware", RUN+="firmware.sh"
-
-LABEL="hotplug_no_add_event"
+SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"

 
 LABEL="gentoo_device_rules_end"
 
 LABEL="gentoo_device_rules_end"

diff --git a/etc/udev/gentoo/64-device-mapper.rules b/etc/udev/gentoo/64-device-mapper.rules
deleted file mode 100644 (file)
index e104a17..0000000
--- a/etc/udev/gentoo/64-device-mapper.rules
+++ /dev/null
@@ -1,33 +0,0 @@
-# device mapper links hook into "change" events, when the dm table
-# becomes available; some table-types must be ignored
-
-KERNEL=="device-mapper",       NAME="mapper/control"
-
-KERNEL!="dm-*", GOTO="device_mapper_end"
-ACTION!="add|change", GOTO="device_mapper_end"
-
-# lookup device name
-# use dmsetup, until devmap_name is provided by sys-fs/device-mapper
-PROGRAM=="/sbin/dmsetup -j %M -m %m --noopencount --noheadings -c -o name info",
-       ENV{DM_NAME}="%c"
-
-# do not do anything if dmsetup does not provide a name
-ENV{DM_NAME}=="", NAME="", OPTIONS="ignore_device"
-
-# ignore luks crypt devices while not fully up
-ENV{DM_NAME}=="temporary-cryptsetup-*", NAME="", OPTIONS="ignore_device"
-
-# use queried name
-ENV{DM_NAME}=="?*", NAME="mapper/$env{DM_NAME}"
-
-SYMLINK+="disk/by-id/dm-name-$env{DM_NAME}"
-
-PROGRAM!="/sbin/dmsetup status -j %M -m %m", GOTO="device_mapper_end"
-RESULT=="|*snapshot*|*error*", GOTO="device_mapper_end"
-
-IMPORT{program}="vol_id --export $tempnode"
-OPTIONS="link_priority=50"
-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_SAFE}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_SAFE}"
-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_SAFE}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_SAFE}"
-
-LABEL="device_mapper_end"

diff --git a/etc/udev/gentoo/80-hotplug.rules b/etc/udev/gentoo/80-hotplug.rules
new file mode 100644 (file)
index 0000000..0637dbc
--- /dev/null
+++ b/etc/udev/gentoo/80-hotplug.rules
@@ -0,0 +1,54 @@
+# /etc/udev/rules/80-hotplug.rules:  module loading rules for udev
+#
+# Gentoo specific rules
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields.  See the udev man page for a full description of them.
+#
+# Try not to modify this file, if you wish to change things, create a new rule
+# file that can be run before this one.
+#
+
+# Module autoloading
+ACTION!="add", GOTO="hotplug_load_end"
+
+# check if the device has already been claimed by a driver
+ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_load_end"
+
+# this driver is broken and should not be loaded automatically
+SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_load_end"
+
+# Autoload modules that lack aliases but have them defined in autoload modules
+ENV{MODALIAS}=="?*", RUN{ignore_error}+="modprobe.sh $env{MODALIAS}"
+
+# /etc/modprobe.conf.
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/modprobe.sh pnp:d$$id; done < /sys$devpath/id'"
+# needed aliases are defined in /etc/modprobe.d/pnp-aliases
+
+
+SUBSYSTEM=="i2o",  RUN+="modprobe.sh i2o_block"
+SUBSYSTEM=="mmc",  RUN+="modprobe.sh mmc_block"
+SUBSYSTEM=="tifm", RUN+="modprobe.sh tifm_sd"
+SUBSYSTEM=="tifm", RUN+="modprobe.sh tifm_ms"
+SUBSYSTEM=="ide",  ATTR{media}=="tape", RUN+="modprobe.sh ide-scsi"
+
+# Load driver for scsi-device
+SUBSYSTEM!="scsi_device", GOTO="hotplug_scsi_end"
+
+       # Parts taken from redhat-rules
+       # sd:           0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
+       # sr:           4 TYPE_WORM, 5 TYPE_ROM
+       # st/osst:      1 TYPE_TAPE
+
+       ATTRS{type}=="?*",      TEST!="[module/sg]", RUN+="modprobe.sh sg"
+       ATTRS{type}=="0|7|14",  RUN+="modprobe.sh sd_mod"
+       ATTRS{type}=="4|5",     RUN+="modprobe.sh sr_mod"
+       ATTRS{type}=="8",       RUN+="modprobe.sh ch"
+
+       ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
+               ATTRS{model}!="ADR*", RUN+="modprobe.sh osst", GOTO="hotplug_scsi_end"
+       ATTRS{type}=="1", RUN+="modprobe.sh st"
+LABEL="hotplug_scsi_end"
+
+LABEL="hotplug_load_end"
+