dgit(1): expand on description of behaviour of --include-dirty

[dgit.git] / dgit.1

'\" t
.TH dgit 1 "" "Debian Project" "dgit"
.SH NAME
dgit \- git integration with the Debian archive
.
.SH SYNOPSIS
.B dgit
[\fIdgit\-opts\fP] \fBclone\fP [\fIdgit\-opts\fP]
\fIpackage\fP [\fIsuite\fP] [\fB./\fP\fIdir|\fB/\fP\fIdir\fR]
.br
.B dgit
[\fIdgit\-opts\fP] \fBfetch\fP|\fBpull\fP [\fIdgit\-opts\fP]
[\fIsuite\fP]
.br
.B dgit
[\fIdgit\-opts\fP] \fBbuild\fP|\fBsbuild\fP|\fBbuild-source\fP
[\fIbuild\-opts\fP]
.br
.B dgit
[\fIdgit\-opts\fP] \fBpbuilder\fP|\fBcowbuilder\fP
[\fIdebbuildopts\fP]
.br
.B dgit
[\fIdgit\-opts\fP] \fBpush\fP|\fBpush-source\fP [\fIdgit\-opts\fP]
[\fIsuite\fP]
.br
.B dgit
[\fIdgit\-opts\fP] \fBrpush\fR \fIbuild-host\fR\fB:\fR\fIbuild-dir\fR
[\fIpush args...\fR]
.br
.B dgit
[\fIdgit\-opts\fP] \fIaction\fR ...
.SH DESCRIPTION
.B dgit
allows you to treat the Debian archive as if it were a git
repository.
Conversely,
it allows Debian to publish the source of its packages
as git branches, in a format which is directly useable
by ordinary people.

This is the command line reference.
Please read the tutorial(s):
.TS
lb l.
dgit-user(7)    for users: edit, build and share packages
dgit-nmu-simple(7)      for DDs: do a straightforward NMU
dgit-maint-native(7)    for maintainers of Debian-native packages
dgit-maint-debrebase(7) for maintainers: a pure-git rebasish workflow
dgit-maint-merge(7)     for maintainers: a pure-git merging workflow
dgit-maint-gbp(7)       for maintainers already using git-buildpackage
dgit-sponsorship(7)     for sponsors and sponsored contributors
dgit-downstream-dsc(7)  setting up dgit push for a new distro
.TE
.LP
See \fBdgit(7)\fP for detailed information about the data
model,
common problems likely to arise with certain kinds of package,
etc.
.SH OPERATIONS
.TP
\fBdgit clone\fR \fIpackage\fP [\fIsuite\fP] [\fB./\fP\fIdir|\fB/\fP\fIdir\fR]
Consults the archive and dgit-repos to construct the git view of
history for
.I package
in
.I suite
.RB ( sid
by default)
in a new directory (named
.BI ./ package
by default);
also, downloads any necessary orig tarballs.

The suite's git tip is
left on the local branch
.BI dgit/ suite
ready for work, and on the corresponding dgit remote tracking branch.
The
.B origin
remote will be set up to point to the package's dgit-repos tree
for the distro to which
.I suite
belongs.

.I suite
may be a combination of several underlying suites in the form
.IR mainsuite \fB,\fR subsuite ...;
see COMBINED SUITES in dgit(7).

For your convenience, the
.B vcs-git
remote will be set up from the package's Vcs-Git field, if there is
one - but note that in the general case the history found there may be
different to or even disjoint from dgit's view.
(See also dgit update-vcs-git.)
.TP
\fBdgit fetch\fR [\fIsuite\fP]
Consults the archive and git-repos to update the git view of
history for a specific suite (and downloads any necessary orig
tarballs), and updates the remote tracking branch
.BR remotes/dgit/dgit/ \fIsuite\fR.
If the current branch is
.BI dgit/ suite
then dgit fetch defaults to
.IR suite ;
otherwise it parses debian/changelog and uses the suite specified
there.
suite may be a combined suite, as for clone.
.TP
\fBdgit pull\fR [\fIsuite\fP]
Does dgit fetch, and then merges the new head of the remote tracking
branch
.BI remotes/dgit/dgit/ suite
into the current branch.
.TP
\fBdgit checkout\fR \fIsuite\fR
Checks out the local branch
.BR dgit/ \fIsuite\fR.

If the branch does not exist,
dgit checkout creates it,
and sets it up the same way as dgit clone would.
In that case, if
the archive remote tracking branch does not exist,
dgit checkout will do a dgit fetch first.

NB: dgit checkout will only do a fetch if it has to.
If you already have the suite branch,
and want to merge your branch with updates from the archive,
use dgit pull.

dgit checkout will normally need to access the archive server,
to canonicalise the provided suite name.
The exception is if you specify the canonical name,
and the branch (or tracking branch) already exists.
.TP
\fBdgit build\fR ...
Runs
.B dpkg-buildpackage
with some suitable options.  Options and arguments after build
will be passed on to dpkg-buildpackage.  It is not necessary to use
dgit build when using dgit; it is OK to use any approach which ensures
that the generated source package corresponds to the relevant git
commit.

Tagging, signing and actually uploading should be left to dgit push.

dgit's build operations access the network,
to get the \-v option right.
See \-v, below.
.TP
\fBdgit build-source\fR ...
Builds the source package, and a changes file for a prospective
source-only upload, using
.BR dpkg-source .
The output is left in
.IR package \fB_\fR version \fB.dsc\fR
and
.IR package \fB_\fR version \fB_source.changes\fR.

Tagging, signing and actually uploading should be left to dgit
push-source, or dgit push.
.TP
.B dgit clean
Cleans the current working tree (according to the \-\-clean= option in
force).
.TP
\fBdgit update-vcs-git\fR [\fIsuite\fP|\fB.\fR] [\fB\-\-\fR] [\fIgit fetch options\fR]
.TQ
\fBdgit update-vcs-git\fR [\fIsuite|\fP\fB.\fR] \fB\-\fR
Sets up, or updates the url of, the vcs-git remote, and
(unless \fB-\fR was specified)
runs git fetch on it.

By default, the Vcs-Git field of the .dsc from Debian sid is used,
as that is probably most up to date.
Another suite may be specified, or
.B .
to indicate that the Vcs-Git of the cwd's debian/control should
be used instead.
.TP
.B dgit help
Print a usage summary.
.TP
\fBdgit sbuild\fR ...
Constructs the source package, uses
.B  sbuild
to do a binary build, and uses mergechanges to merge the source and
binary changes files.  Options and arguments after sbuild will be
passed on to sbuild.
The output is left in
.IR package \fB_\fR version \fB_multi.changes\fR.
.IP
Note that by default
sbuild does not build arch-independent packages.
You probably want to pass \-A, to request those.
.IP
Tagging, signing and actually uploading should be left to dgit push.
.TP
\fBdgit pbuilder\fR [\fIdebbuildopts\fP]
Constructs the source package, uses
.B  pbuilder
to do a binary build, and uses mergechanges to merge the source and
binary changes files.
The output is left in
.IR package \fB_\fR version \fB_multi.changes\fR.

You should ensure that your dgit \-\-build-products-dir setting matches
your pbuilder \-\-buildresult.

The \fIdebbuildopts\fP are passed to pbuilder using its \-\-debbuildopts
option.  If you want to pass other options to pbuilder, use the
\fB\-\-pbuilder:\fR dgit option as described below
(remember that dgit options should appear between \fBdgit\fR and
\fBpbuilder\fR).

You should ensure that in your pbuilderrc you do
.B not
have the setting
.B SOURCE_ONLY_CHANGES=yes
as this may cause trouble.
.TP
\fBdgit cowbuilder\fR [\fIdebbuildopts\fP]
Like \fBdgit pbuilder\fR, but uses
.B cowbuilder
instead of
.B pbuilder.
.TP
\fBdgit gbp-build\fR ...
Runs
.B git-buildpackage
with some suitable options.  Options and arguments after gbp-build
will be passed on to git-buildpackage.

By default this uses \-\-quilt=gbp, so HEAD should be a
git-buildpackage style branch, not a patches-applied branch.

Tagging, signing and actually uploading should be left to dgit push.
.TP
\fBdgit push\fR [\fIsuite\fP]
Does an `upload', pushing the current HEAD to the archive (as a source
package) and to dgit-repos (as git commits).  The package must already
have been built ready for upload, with the .dsc and .changes
left in the parent directory.  It is normally best to do the build
with dgit too (eg with dgit sbuild): some existing build tools pass
unhelpful options to dpkg-source et al by default, which can result in
the built source package not being identical to the git tree.

In more detail: dgit push checks that the current HEAD corresponds to
the .dsc.  It then pushes the HEAD to the suite's dgit-repos branch,
adjusts the .changes to include any .origs which the archive lacks
and exclude .origs which the archive has
(so \-sa and \-sd are not needed when building for dgit push),
makes a signed git tag, edits the .dsc to contain the dgit metadata
field, runs debsign to sign the upload (.dsc and .changes), pushes the
signed tag, and finally uses dput to upload the .changes to the
archive.

dgit push always uses the package, suite and version specified in the
debian/changelog and the .dsc, which must agree.  If the command line
specifies a suite then that must match too.

When used on a git-debrebase branch,
dgit calls git-debrebase
to prepare the branch
for source package upload and push.
.TP
\fBdgit push-source\fR [\fIsuite\fP]
Without \fB\-C\fR, builds a source package and dgit pushes it.  Saying
\fBdgit push-source\fR is like saying "update the source code in the
archive to match my git HEAD, and let the autobuilders do the rest."

With \fB\-C\fR, performs a dgit push, additionally ensuring that no
binary packages are uploaded.
.TP
\fBdgit rpush\fR \fIbuild-host\fR\fB:\fR\fIbuild-dir\fR [\fIpush args...\fR]
Pushes the contents of the specified directory on a remote machine.
This is like running dgit push on build-host with build-dir as the
current directory; however, signing operations are done on the
invoking host.  This allows you to do a push when the system which has
the source code and the build outputs has no access to the key:

.TS
l l.
1.      Clone on build host (dgit clone)
2.      Edit code on build host (edit, git commit)
3.      Build package on build host (dgit build)
4.      Test package on build host or elsewhere (dpkg \-i, test)
5.      Upload by invoking dgit rpush on host with your GPG key.
.TE

However, the build-host must be able to ssh to the dgit repos.  If
this is not already the case, you must organise it separately, for
example by the use of ssh agent forwarding.

The remaining arguments are treated just as dgit push would handle
them.

build-host and build\-dir can be passed as separate
arguments; this is assumed to be the case if the first argument
contains no : (except perhaps one in [ ], to support IPv6 address
literals).

You will need similar enough versions of dgit on the build-host and
the invocation host.  The build-host needs gnupg installed, with your
public key in its keyring (but not your private key, obviously).
.TP
.B dgit setup-new-tree
Configure the current working tree the way that dgit clone would have
set it up.  Like running
.BR "dgit setup-useremail" ,
.B setup-mergechangelogs
and
.B setup-gitattributes
(but only does each thing if dgit is configured to do it automatically).
You can use these in any git repository, not just ones used with
the other dgit operations.
Does
.B not
run
.B update-vcs-git
(as that requires Debian packaging information).
.TP
.B dgit setup-useremail
Set the working tree's user.name and user.email from the
distro-specific dgit configuration
.RB ( dgit-distro. \fIdistro\fR .user-name " and " .user-email ),
or DEBFULLNAME or DEBEMAIL.
.TP
.B dgit setup-mergechangelogs
Configures a git merge helper for the file
.B debian/changelog
which uses
.BR dpkg-mergechangelogs .
.TP
.B dgit setup-gitattributes
Set up the working tree's
.B .git/info/attributes
to disable all transforming attributes for all files.
This is done by defining a macro attribute,
.B dgit-defuse-attrs,
and applying it to
.BR * .
For why, see
.B GITATTRIBUTES
in
.BR dgit(7) .
Note that only attributes affecting the working tree are suppressed.
git-archive may remain exciting.

If there is an existing macro attribute line
.B [attr]dgit-defuse-attrs
in .git/info/attributes,
but it is insufficient,
because it was made by an earlier version of dgit
and git has since introduced new transforming attributes,
this modifies the macro to disable the newer transformations.

(If there is already a macro attribute line
.B [attr]dgit-defuse-attrs
in .git/info/attributes
which does what dgit requires
(whatever files it effects),
this operation does nothing further.
This fact can be used to defeat or partially defeat
dgit setup-gitattributes
and hence
dgit setup-new-tree.)
.TP
.B dgit quilt-fixup
`3.0 (quilt)' format source packages need changes representing not
only in-tree but also as patches in debian/patches.  dgit quilt-fixup
checks whether this has been done; if not, dgit will make appropriate
patches in debian/patches and also commit the resulting changes to
git.

This is normally done automatically by dgit build and dgit push.

dgit will try to turn each relevant commit in your git history into a
new quilt patch.  dgit cannot convert nontrivial merges, or certain
other kinds of more exotic history.  If dgit can't find a suitable
linearisation of your history, by default it will fail, but you can
ask it to generate a single squashed patch instead.

When used with a git-debrebase branch,
dgit will ask git-debrebase to prepare patches.
However,
dgit can make patches in some situations where git-debrebase fails,
so dgit quilt-fixup can be useful in its own right.
To always use dgit's own patch generator
instead of git-debrebase make-patches,
pass \-\-git-debrebase=true to dgit.

See
.B FORMAT 3.0 (QUILT)
in
.BR dgit(7) .
.TP
\fBdgit import-dsc\fR [\fIsub-options\fR] \fI../path/to/.dsc\fR [\fB+\fR|\fB..\fR]branch
Import a Debian-format source package,
specified by its .dsc,
into git,
the way dgit fetch would do.

This does about half the work of dgit fetch:
it will convert the .dsc into a new, orphan git branch.
Since dgit has no access to a corresponding source package archive
or knowledge of the history
it does not consider whether this version is newer
than any previous import
or corresponding git branches;
and it therefore does not
make a pseudomerge to bind the import
into any existing git history.

Because a .dsc can contain a Dgit field naming a git commit
(which you might not have),
and specifying where to find that commit
(and any history rewrite table),
import-dsc might need online access.
If this is a problem
(or dgit's efforts to find the commit fail),
consider \-\-no-chase-dsc-distro
or \-\-force-import-dsc-with-dgit-field.

There is only one sub-option:

.B \-\-require-valid-signature
causes dgit to insist that the signature on the .dsc is valid
(using the same criteria as dpkg-source \-x).
Otherwise, dgit tries to verify the signature but
the outcome is reported only as messages to stderr.

If
.I branch
is prefixed with
.B +
then if it already exists, it will be simply overwritten,
no matter its existing contents.
If
.I branch
is prefixed with
.B ..
then if it already exists
and dgit actually imports the dsc
(rather than simply reading the git commit out of the Dgit field),
dgit will make a pseudomerge
so that the result is necessarily fast forward
from the existing branch.
Otherwise, if \fIbranch\fR already exists,
dgit will stop with an error message.

If
.I branch
does not start with refs/, refs/heads/ is prepended.
.TP
.B dgit version
Prints version information and exits.
.TP
.BI "dgit clone-dgit-repos-server" " destdir"
Tries to fetch a copy of the source code for the dgit-repos-server,
as actually being used on the dgit git server, as a git tree.
.TP
.BI "dgit print-dgit-repos-server-source-url"
Prints the url used by dgit clone-dgit-repos-server.
This is hopefully suitable for use as a git remote url.
It may not be useable in a browser.
.TP
.BI "dgit print-dpkg-source-ignores"
Prints the \-i and \-I arguments which must be passed to dpkg-souce
to cause it to exclude exactly the .git directory
and nothing else.
The separate arguments are unquoted, separated by spaces,
and do not contain spaces.
.TP
.B dgit print-unapplied-treeish
Constructs a tree-ish approximating the patches-unapplied state
of your 3.0 (quilt) package,
and prints the git object name to stdout.
This requires appropriate .orig tarballs.
This tree object is identical to your .origs
as regards upstream files.
The contents of the debian subdirectory is not interesting
and should not be inspected;
except that debian/patches will be identical to your HEAD.

To make this operate off-line,
the access configuration key
which is used to determine the build-products-dir
is the uncanonicalised version of the suite name from the changelog,
or (of course) dgit.default.build-products-dir.
See ACCESS CONFIGURATION, below.

This function is primarily provided for the benefit of git-debrebase.
.SH OPTIONS
.TP
.BR \-\-dry-run " | " \-n
Go through the motions, fetching all information needed, but do not
actually update the output(s).  For push, dgit does
the required checks and leaves the new .dsc in a temporary file,
but does not sign, tag, push or upload.
.TP
.BR \-\-damp-run " | " \-L
Go through many more of the motions: do everything that doesn't
involve either signing things, or making changes on the public
servers.
.TP
.BI \-k keyid
Use
.I keyid
for signing the tag and the upload.  The default comes from the
distro's
.B keyid
config setting (see CONFIGURATION, below), or failing that, the
uploader trailer line in debian/changelog.
.TP
.BR --no-sign
does not sign tags or uploads (meaningful only with push).
.TP
.TP
.BI -p package
Specifies that we should process source package
.I package
rather than looking in debian/control or debian/changelog.
Valid with dgit fetch and dgit pull, only.
.TP
.BR --clean=git " | " -wg
Use
.BR "git clean -xdf"
to clean the working tree,
rather than running the package's rules clean target.

This will delete all files which are not tracked by git.
(Including any files you forgot to git add.)

.BI --clean= ...
options other than dpkg-source
are useful when the package's clean target is troublesome, or
to avoid needing the build-dependencies.

dgit will only actually clean the tree if it needs to
(because it needs to build the source package
or binaries from your working tree).
Otherwise
it will just check that there are no untracked unignored files.
See --clean=git[-ff],always, below.
.TP
.BR --clean=git-ff " | " -wgf
Use
.BR "git clean -xdff"
to clean the working tree.
Like
git clean -xdf
but it also removes any subdirectories containing different git
trees (which only unusual packages are likely to create).
.TP
.BR --clean=git "[" -ff "]" ,always " | " -wga " | " -wgfa
Like --clean=git, but always does the clean and not just a check,
deleting any untracked un-ignored files.
.TP
.BR --clean=check " | " --clean=check,ignores " | " -wc " | " -wci
Merely check that the tree is clean (does not contain uncommitted
files).
Avoids running rules clean,
and can avoid needing the build-dependencies.

With
.BR ,ignores
or
.BR \-wci ,
untracked files covered by .gitignore are tolerated,
so only files which show up as
.B ?
in git status
(ie, ones you maybe forgot to git add)
are treated as a problem.
.TP
.BR \-\-clean=none " | " \-wn
Do not clean the tree, nor check that it is clean.
Avoids running rules clean,
and can avoid needing the build-dependencies.
If there are
files which are not in git, or if the build creates such files, a
subsequent dgit push will fail.
.TP
.BR --clean=dpkg-source "[" -d "] | " -wd " | " -wdd
Use dpkg-buildpackage to do the clean, so that the source package
is cleaned by dpkg-source running the package's clean target.
--clean=dpkg-source is the default.

Without the extra
.BR d ,
requires the package's build dependencies.

With
.BR ... -d
or
.BR -wdd ,
the build-dependencies are not checked
(due to passing
.BR -d
to dpkg-buildpackage),
which violates policy, but may work in practice.

The rules clean target will only be run if it is needed:
when dgit is going to build source or binary packages
from your working tree,
rather than from your git branch
(for example because of \-\-include-dirty
or because the binary package build uses your working tree).

In all cases,
dgit will check that there are (after rules clean, if applicable) no
untracked un-ignored files,
in case these are files you forgot to git add.
(Except that this check is not done
for a `3.0 (quilt)' package
when dgit has to apply patches, dirtily, to the working tree.)
If your package does not have a good .gitignore
you will probably need --clean=dpkg-source,no-check aka -wdn.
.TP
.BR --clean=dpkg-source "[" -d "]" ,no-check " | " -wdn " | " -wddn
Like --clean=dpkg-source, but
does not care about untracked un-ignored files.
.TP
.BR --clean=dpkg-source "[" -d "]" ,all-check " | " -wda " | " -wdda
Like --clean=dpkg-source, but
fails even on ignored untracked files.
This could perhaps be used to detect bugs in your rules clean target.
.TP
.BR -N " | " --new
The package is or may be new in this suite.  Without this, dgit will
refuse to push.  It may (for Debian, will) be unable to access the git
history for any packages which have been newly pushed and have not yet
been published.
.TP
.BR --include-dirty
Do not complain if the working tree does not match your git HEAD,
and when building,
include the changes from your working tree.
This can be useful with build, if you plan to commit later.  (dgit
push will still ensure that the .dsc you upload and the git tree
you push are identical, so this option won't make broken pushes.)

Note that this does
.BR not
prevent dgit from cleaning your tree, so if the changes in your
working tree are in the form of untracked files, those might still be
deleted.  If you want to include untracked files in the build, you can
use --clean=none in addition to --include-dirty.  Note that this
combination can fail if the untracked files are under
\fIdebian/patches/\fR.
.TP
.BR --ignore-dirty
Deprecated alias for --include-dirty.
.TP
.BR --overwrite [=\fIprevious-version\fR]
Declare that your HEAD really does contain
all the (wanted) changes
from all versions listed in its changelog;
or, all (wanted) changes from
.IR previous-version .
This promise is needed when
your git branch is not a descendant
of the version in the archive
according to the git revision history.

It is safer not to specify
.IR previous-version ,
and usually it's not needed.
Just say
.BR \-\-overwrite ,
unless you know what you are doing.

This option is useful if you are the maintainer, and you have
incorporated NMU changes into your own git workflow in a way that
doesn't make your branch a fast forward from the NMU.

This option is also usually necessary
the first time a package is pushed with dgit push
to a particular suite.
See
.BR dgit-maint- \fI*\fR (7) .

If
.I previous-version
is not
specified, dgit will check that the version in the archive is
mentioned in your debian/changelog.
(This will avoid losing
changes, even with
.BR --overwrite ,
unless someone committed to git a finalised changelog
entry, and then made later changes to that version.)
If
.IR previous-version
is specified, it ought to be the version currently in the archive.

dgit push --overwrite
will, if necessary, make a
pseudo-merge (that is, something that looks like the result
of git merge -s ours) to stitch the archive's version into your own
git history, so that your push is a fast forward from the archive.

(In quilt mode
.BR gbp ", " dpm ", " unpatched " or " baredebian *,
implying a split between the dgit view and the
maintainer view, the pseudo-merge will appear only in the dgit view.)
.TP
.BR \-\-delayed =\fIdays\fR
Upload to a DELAYED queue.

.B WARNING:
If the maintainer responds by cancelling
your upload from the queue,
and does not make an upload of their own,
this will not rewind the git branch on the dgit git server.
Other dgit users will then see your push
(with a warning message from dgit)
even though the maintainer wanted to abolish it.
Such users might unwittingly reintroduce your changes.

If this situation arises,
someone should make a suitable dgit push
to update the contents of dgit-repos
to a version without the controversial changes.
.TP
.BR --no-chase-dsc-distro
Tells dgit not to look online
for additional git repositories
containing information about a particular .dsc being imported.
Chasing is the default.

For most operations
(such as fetch and pull),
disabling chasing
means dgit will access only the git server
for the distro you are directly working with,
even if the .dsc was copied verbatim from another distro.
For import-dsc,
disabling chasing
means dgit will work completely offline.

Disabling chasing can be hazardous:
if the .dsc names a git commit which has been rewritten
by those in charge of the distro,
this option may prevent that rewrite from being effective.
Also,
it can mean that
dgit fails to find necessary git commits.
.TP
.BR \-\-save-dgit-view= \fIbranch\fR|\fIref\fR
Specifies that when split view is in operation,
and dgit calculates
(or looks up in its cache)
a dgit view corresponding to your HEAD,
the dgit view will be left in
.IR ref .
The specified ref is unconditionally overwritten,
so don't specify a branch you want to keep.

This option is effective only with the following operations:
quilt-fixup; push; all builds.
And it is only effective when split view is actually in operation.

If ref does not start with refs/
it is taken to be a branch -
i.e. refs/heads/ is prepended.

.B \-\-dgit-view-save
is a deprecated alias for
\-\-save-dgit-view.
.TP
.BI \-\-deliberately- something
Declare that you are deliberately doing
.IR something .
This can be used to override safety catches, including safety catches
which relate to distro-specific policies.
The use of \-\-deliberately is declared and published in the signed tags
generated for you by dgit,
so that the archive software can give effect to your intent,
and
for the benefit of humans looking at the history.
The meanings of
.IR something s
understood in the context of Debian are discussed below:
.TP
.BR --deliberately-not-fast-forward
Declare that you are deliberately rewinding history.  When pushing to
Debian, use this when you are making a renewed upload of an entirely
new source package whose previous version was not accepted for release
from NEW because of problems with copyright or redistributibility.

When split view is in operation,
this also prevents the construction by dgit of a pseudomerge
to make the dgit view fast forwarding.
Normally only one of
--overwrite (which creates a suitable pseudomerge)
and
--deliberately-not-fast-forward
(which suppresses the pseudomerge and the fast forward checks)
should be needed;
--overwrite is usually better.
.TP
.BR --deliberately-include-questionable-history
Declare that you are deliberately including, in the git history of
your current push, history which contains a previously-submitted
version of this package which was not approved (or has not yet been
approved) by the ftpmasters.  When pushing to Debian, only use this
option after verifying that: none of the rejected-from-NEW (or
never-accepted) versions in the git history of your current push, were
rejected by ftpmaster for copyright or redistributability reasons.
.TP
.BR --deliberately-fresh-repo
Declare that you are deliberately rewinding history and want to
throw away the existing repo.  Not relevant when pushing to Debian,
as the Debian server will do this automatically when necessary.
.TP
.BR --quilt=linear
When fixing up source format `3.0 (quilt)' metadata, insist on
generating a linear patch stack: one new patch for each relevant
commit.
If such a stack cannot be generated, fail.
This is the default for Debian.

HEAD should be a series of plain commits
(not touching debian/patches/),
and pseudomerges,
with as ancestor a patches-applied branch.
.TP
.BR --quilt=auto
When fixing up source format `3.0 (quilt)' metadata, prefer to
generate a linear patch stack
(as with --quilt=auto)
but if that doesn't seem possible,
try to generate a single squashed patch for all the changes made in git
(as with --quilt=smash).
This is not a good idea for an NMU in Debian.
.TP
.BR --quilt=smash
When fixing up source format `3.0 (quilt)' metadata,
generate a single additional patch for all the changes made in git.
This is not a good idea for an NMU in Debian.

(If HEAD has any in-tree patches already, they must apply cleanly.
This will be the case for any trees produced by dgit fetch or clone;
if you do not change the upstream version
nor make changes in debian/patches,
it will remain true.)
.TP
.BR --quilt=nofix
Check whether source format `3.0 (quilt)' metadata would need fixing
up, but, if it does, fail.  You must then fix the metadata yourself
somehow before pushing.  (NB that dpkg-source --commit will not work
because the dgit git tree does not have a
.B .pc
directory.)
.TP
.BR --quilt=nocheck " | " --no-quilt-fixup
Do not check whether source format `3.0 (quilt)' metadata needs
fixing up.  If you use this option and the metadata did in fact need
fixing up, dgit push will fail.
.TP
.BR -- [ quilt= ] gbp " | " -- [ quilt= ] dpm " | " --quilt=unapplied " | " -- [ quilt= ] baredebian [ +tarball ]
Tell dgit that you are using a nearly-dgit-compatible git branch,
aka a
.BR "maintainer view" ,
and
do not want your branch changed by dgit.

These quilt modes are known as
.BR "splitting quilt modes" .
See --split-view, below.

.B --gbp
(short for
.BR --quilt=gbp )
is for use with git-buildpackage.
Your HEAD is expected to be
a patches-unapplied git branch, except that it might contain changes
to upstream .gitignore files.  This is the default for dgit gbp-build.

.B --dpm
(short for
.BR --quilt=dpm )
is for use with git-dpm.
Your HEAD is expected to be
a patches-applied git branch,
except that it might contain changes to upstream .gitignore files.

.B --quilt=unapplied
specifies that your HEAD is a patches-unapplied git branch (and
that any changes to upstream .gitignore files are represented as
patches in debian/patches).

.B --quilt=baredebian
specifies that your HEAD contains only a debian/ directory,
with any changes to upstream files represented as
patches in debian/patches.
The upstream source must be available in git,
by default, in a suitably named git tag;
see --upstream-commitish.
In this mode, dgit cannot check that
all edited upstream files are properly represented as patches:
dgit relies on
debian/patches being correct.

.B --quilt=baredebian+tarball
is like --quilt=baredebian,
but is used when there is no appropriate upstream git history.
To construct the dgit view,
dgit will import your orig tarballs' contents into git.
In this mode, dgit cannot check that
the upstream parts of your upload correspond to what you intend:
dgit relies on
the right orig tarball(s) existing, and
debian/patches being correct.

With --quilt=gbp|dpm|unapplied|baredebian*,
dgit push (or precursors like quilt-fixup and build) will automatically
generate a conversion of your git branch into the right form.
dgit push will push the
dgit-compatible form (the
.BR "dgit view" )
to the dgit git server.
The dgit view will be visible to you
in the dgit remote tracking branches, but your own branch will
not be modified.
dgit push will create a tag
.BI debian/ version
for the maintainer view, and the dgit tag
.BI archive/debian/ version
for the dgit view.
dgit quilt-fixup will merely do some checks,
and cache the maintainer view.

.B If you have a branch like this it is essential to specify the appropriate \-\-quilt= option!
This is because it is not always possible to tell: a patches-unapplied
git branch of a package with one patch, for example, looks very like
a patches-applied branch where the user has used git revert to
undo the patch, expecting to actually revert it.
However, if you fail to specify the right \-\-quilt option,
and you aren't too lucky, dgit will notice the problem and stop,
with a useful hint.
.TP
.BR \-d "\fIdistro\fR | " \-\-distro= \fIdistro\fR
Specifies that the suite to be operated on is part of distro
.IR distro .
This overrides the default value found from the git config option
.BR dgit-suite. \fIsuite\fR .distro .
The only effect is that other configuration variables (used
for accessing the archive and dgit-repos) used are
.BR dgit-distro. \fIdistro\fR .* .

If your suite is part of a distro that dgit already knows about, you
can use this option to make dgit work even if your dgit doesn't know
about the suite.  For example, specifying
.B \-ddebian
will work when the suite is an unknown suite in the Debian archive.

To define a new distro it is necessary to define methods and URLs
for fetching (and, for dgit push, altering) a variety of information both
in the archive and in dgit-repos.
How to set this up is not yet documented.
.TP
.BR \-\-split-view=auto | always | never
Controls whether dgit operates a split view,
separating your own branch (as Debian maintainer)
from that shown to users of dgit clone and dgit fetch.

When split view is in operation
dgit will not make or merge any commits onto your own branch.
Specifically, only the dgit view will contain
dgit's pseudomerges,
which bring into the git history previous uploads made with dgit push,
and any commits in debian/patches required
to make a correct `3.0 (quilt)' source package.

.B auto
is the default, and splits the view only when needed:
i.e., when you are working with a `3.0 (quilt)' source package
and a splitting quilt mode:
\-\-[quilt=]gbp, dpm, unpatched or baredebian*.

.B always
splits the view regardless of the source format and the quilt mode.

.B never
will cause dgit to fail if split view is needed.

When split view is in operation, the dgit view is visible
in your local git clone,
but only in refs specific to dgit:
notably
.BI remotes/dgit/dgit/ suite
and
.BR archive/ \fIdistro\fR / \fIversion\fR.

Note that split view does not affect dgit fetch,
and is not compatible with dgit pull.
.TP
.BI \-C changesfile
Specifies the .changes file which is to be uploaded.  By default
dgit push looks for a single .changes file in the parent directory whose
filename suggests it is for the right package and version.

If the specified
.I changesfile
pathname contains slashes, the directory part is also used as
the value for
.BR \-\-build-products-dir ;
otherwise, the changes file is expected in that directory (by
default, in
.BR .. ).
.TP
.BI \-\-upstream-commitish= upstream
For use with --quilt=baredebian only.
Specifies the commit containing the upstream source.
This commit must be identical to your .orig tarball.
The default is to look for one of the git tags
.IB U " v" U " upstream/" U
(in that order), where U is the upstream version.
.TP
.B \-\-rm-old-changes
When doing a build, delete any changes files matching
.IB package _ version _*.changes
before starting.  This ensures that
dgit push (and dgit sbuild) will be able to unambiguously
identify the relevant changes files from the most recent build, even
if there have been previous builds with different tools or options.
The default is not to remove, but
.B \-\-no-rm-old-changes
can be used to override a previous \-\-rm-old-changes
or the .rm-old-changes configuration setting.

Note that \fBdgit push-source\fR will always find the right .changes,
regardless of this option.
.TP
.BI \-\-build-products-dir= directory
Specifies where to find and create tarballs, binary packages,
source packages, .changes files, and so on.

By default, dgit uses the parent directory
.RB ( .. ).

Changing this setting may necessitate
moving .orig tarballs to the new directory,
so it is probably best to
use the
.BI dgit.default.build-products-dir
configuration setting
(see CONFIGURATION, below)
which this command line option overrides).
.TP
.BI --no-rm-on-error
Do not delete the destination directory if clone fails.
.TP
.BI --dep14tag
Generates a DEP-14 tag (eg
.BR debian/ \fIversion\fR)
as well as a dgit tag (eg
.BR archive/debian/ \fIversion\fR).
This is the default.
.TP
.BI --no-dep14tag
Do not generate a DEP-14 tag, except when split view is in operation.
.TP
.BI --always-dep14tag
Obsolete alias for --dep14tag, retained for compatibility.
.TP
.BI -D
Prints debugging information to stderr.  Repeating the option produces
more output (currently, up to -DDDD is meaningfully different).
.TP
.BI -c name = value
Specifies a git configuration option, to be used for this run.
dgit itself is also controlled by git configuration options.
.TP
.RI \fB-v\fR version "|\fB_\fR | " \fB--since-version=\fR version |\fB_\fR
Specifies the
.BI -v version
option to pass to dpkg-genchanges, during builds.  Changes (from
debian/changelog) since this version will be included in the built
changes file, and hence in the upload.  If this option is not
specified, dgit will query the archive and use the latest version
uploaded to the intended suite.

Specifying
.B _
inhibits this, so that no -v option will be passed to dpkg-genchanges
(and as a result, only the last stanza from debian/changelog will
be used for the build and upload).
.TP
.RI \fB-m\fR maintaineraddress
Passed to dpkg-genchanges (eventually).
.TP
.RI \fB--ch:\fR option
Specifies a single additional option to pass, eventually, to
dpkg-genchanges.

Options which are safe to pass include
.BR -C
(and also
.BR "-si -sa -sd"
although these should never be necessary with Debian since dgit
automatically calculates whether .origs need to be uploaded.)

For other options the caveat below applies.
.TP
.RI \fB--curl:\fR option " | \fB--dput:\fR" option " |..."
Specifies a single additional option to pass to
.BR curl ,
.BR dput ,
.BR debsign ,
.BR dpkg-source ,
.BR dpkg-buildpackage ,
.BR dpkg-genchanges ,
.BR sbuild ,
.BR pbuilder ,
.BR cowbuilder ,
.BR ssh ,
.BR dgit ,
.BR git-debrebase ,
.BR apt-get ,
.BR apt-cache ,
.BR gbp-pq ,
.BR gbp-build ,
or
.BR mergechanges .
Can be repeated as necessary.

Use of this ability should not normally be necessary.
It is provided for working around bugs,
or other unusual situations.
If you use these options,
you may violate dgit's assumptions
about the behaviour of its subprograms
and cause lossage.

For dpkg-buildpackage, dpkg-genchanges, mergechanges and sbuild,
the option applies only when the program is invoked directly by dgit.
Usually, for passing options to dpkg-genchanges, you should use
.BR \-\-ch: \fIoption\fR.

Specifying \-\-git is not effective for some lower-level read-only git
operations performed by dgit, and also not when git is invoked by
another program run by dgit.

See notes below regarding ssh and dgit.

NB that \-\-gpg:option is not supported (because debsign does not
have that facility).
But see
.B \-k
and the
.B keyid
distro config setting.
.TP
.RI \fB\-\-curl!:\fR option " | \fB\-\-dput!:\fR" option " |..."
Specifies an option to remove from the command line for
a program called by dgit, as for
\fB\-\-\fR\fIprogram\fI\fB:\fR\fIoption\fR
(and the same caveats apply).

Any options or arguments exactly identical to
.I option
are removed.
(It is not an error if there were none.)

This can only be used to delete options
which are always passed by default by dgit,
or to undo a previous
\fB\-\-\fR\fIprogram\fI\fB:\fR\fIoption\fR.
It cannot be used to override option(s) dynamically
decided on by dgit.
.TP
.RI \fB\-\-curl=\fR program " | \fB\-\-dput=\fR" program  " |..."
Specifies alternative programs to use instead of
.BR curl ,
.BR dput ,
.BR debsign ,
.BR dpkg-source ,
.BR dpkg-buildpackage ,
.BR dpkg-genchanges ,
.BR sbuild ,
.BR pbuilder ,
.BR cowbuilder ,
.BR gpg ,
.BR ssh ,
.BR dgit ,
.BR git-debrebase ,
.BR apt-get ,
.BR apt-cache ,
.BR git ,
.BR gbp-pq ,
.BR gbp-build ,
or
.BR mergechanges .

For
.BR dpkg-buildpackage ,
.BR dpkg-genchanges ,
.B mergechanges
and
.BR sbuild ,
this applies only when the program is invoked directly by dgit.

For
.BR dgit ,
specifies the command to run on the remote host when dgit
rpush needs to invoke a remote copy of itself.  (dgit also reinvokes
itself as the EDITOR for dpkg-source \-\-commit; this is done using
argv[0], and is not affected by \-\-dgit=).

.BR gbp-build 's
value
is used instead of gbp build or git-buildpackage.  (The default is
the latter unless the former exists on PATH.)
.BR gbp-pq 's
value
is used instead of gbp pq.
In both cases,
unusually, the specified value is split on whitespace
to produce a command and possibly some options and/or arguments.

For pbuilder and cowbuilder, the defaults are
.BR "sudo -E pbuilder"
and
.BR "sudo -E cowbuilder"
respectively.
Like with gbp-build and gbp pq,
the specified value is split on whitespace.

For
.BR ssh ,
the default value is taken from the
.B DGIT_SSH
or
.B GIT_SSH
environment variables, if set (see below).  And, for ssh, when accessing the
archive and dgit-repos, this command line setting is overridden by the
git config variables
.BI dgit-distro. distro .ssh
and
.B .dgit.default.ssh
(which can in turn be overridden with \-c).  Also, when dgit is using
git to access dgit-repos, only git's idea of what ssh to use (eg,
.BR GIT_SSH )
is relevant.
.TP
.BI \-\-existing-package= package
dgit push needs to canonicalise the suite name.  Sometimes, dgit
lacks a way to ask the archive to do this without knowing the
name of an existing package.  Without \-\-new we can just use the
package we are trying to push.  But with \-\-new that will not work, so
we guess
.B dpkg
or use the value of this option.  This option is not needed with the
default mechanisms for accessing the archive.
.TP
.BR \-h | \-\-help
Print a usage summary.
.TP
.BI \-\-initiator-tempdir= directory
dgit rpush uses a temporary directory on the invoking (signing) host.
This option causes dgit to use
.I directory
instead.  Furthermore, the specified directory will be emptied,
removed and recreated before dgit starts, rather than removed
after dgit finishes.  The directory specified must be an absolute
pathname.
.TP
.BI \-\-force- something
Instructs dgit to try to proceed despite detecting
what it thinks is going to be a fatal problem.
.B This is probably not going to work.
These options are provided as an escape hatch,
in case dgit is confused.
(They might also be useful for testing error cases.)
.TP
.B \-\-force-import-dsc-with-dgit-field
Tell dgit import-dsc to treat a .dsc with a Dgit field
like one without it.
The result is a fresh import,
discarding the git history
that the person who pushed that .dsc was working with.
.TP
.B \-\-force-uploading-binaries
Carry on and
upload binaries
even though dgit thinks your distro does not permit that.
.TP
.B \-\-force-uploading-source-only
Carry on and do a source-only upload,
without any binaries,
even though dgit thinks your distro does not permit that,
or does not permit that in this situation.
.TP
.B \-\-force-unrepresentable
Carry on even if
dgit thinks that your git tree contains changes
(relative to your .orig tarballs)
which dpkg-source is not able to represent.
Your build or push will probably fail later.
.TP
.B \-\-force-changes-origs-exactly
Use the set of .origs specified in your .changes, exactly,
without regard to what is in the archive already.
The archive may well reject your upload.
.TP
.B \-\-force-unsupported-source-format
Carry on despite dgit not understanding your source package format.
dgit will probably mishandle it.
.TP
.B \-\-force-dsc-changes-mismatch
Do not check whether .dsc and .changes match.
The archive will probably reject your upload.
.TP
.BR \-\-force-import-gitapply-absurd " | " \-\-force-import-gitapply-no-absurd
Force on or off the use of the absurd git-apply emulation
when running gbp pq import
when importing a package from a .dsc.
See Debian bug #841867.
.SH CONFIGURATION
dgit can be configured via the git config system.
You may set keys with git-config (either in system-global or per-tree
configuration), or provide
.BI -c key = value
on the dgit command line.
.LP
Settings likely to be useful for an end user include:
.TP
.BI dgit.default.build-products-dir
Specifies where to find the built files to be uploaded,
when --build-products-dir is not specified.  The default is
the parent directory
.RB ( .. ).
.TP
.BR dgit-suite. \fIsuite\fR .distro " \fIdistro\fR"
Specifies the distro for a suite.  dgit keys off the suite name (which
appears in changelogs etc.), and uses that to determine the distro
which is involved.  The config used is thereafter that for the distro.

.I suite
may be a glob pattern.
.TP
.BI dgit.default.distro " distro"
The default distro for an unknown suite.
.TP
.BI dgit.default.default-suite " suite"
The default suite (eg for clone).
.TP
.BR dgit.default. *
for each
.BR dgit-distro. \fIdistro\fR . *,
the default value used if there is no distro-specific setting.
.TP
.BR dgit-distro. \fIdistro\fR .clean-mode
One of the values for the command line \-\-clean= option; used if
\-\-clean is not specified.
.TP
.BR dgit-distro. \fIdistro\fR .clean-mode-newer
Like .clean-mode,
but ignored if the value is unknown to this version of dgit.
Setting both .clean-mode and .clean-mode-newer is useful
to provide a single git config compatible with different dgit versions.
.TP
.BR dgit-distro. \fIdistro\fR .quilt-mode
One of the values for the command line \-\-quilt= option; used if
\-\-quilt is not specified.
.TP
.BR dgit-distro. \fIdistro\fR .split-view
.TP
.BR dgit-distro. \fIdistro\fR .rm-old-changes
Boolean, used if neither \-\-rm-old-changes nor \-\-no-rm-old-changes
is specified.  The default is not to remove.
.TP
.BR dgit-distro. \fIdistro\fR .readonly " " auto | a " | " true | t | y | 1 " | " false | f | n | 0
Whether you have push access to the distro.
For Debian, it is OK to use auto, which uses readonly mode if you are
not pushing right now;
but, setting this to false will avoid relying on the mirror of the dgit
git repository server.
.TP
.BI dgit-distro. distro .keyid
See also
.BR \-k .
.TP
.BI dgit-distro. distro .mirror " url"
.TP
.BI dgit-distro. distro .username
Not relevant for Debian.
.TP
.BI dgit-distro. distro .upload-host
Might be useful if you have an intermediate queue server.
.TP
.BI dgit-distro. distro .user-name " " dgit-distro. distro .user-email
Values to configure for user.name and user.email in new git trees.  If
not specified, the DEBFULLNAME and DEBEMAIL environment variables are
used, respectively.  Only used if .setup-usermail is not disabled.
.TP
.BI dgit-distro. distro .setup-useremail
Whether to set user.name and user.email in new git trees.
True by default.  Ignored for dgit setup-useremail, which does it anyway.
.TP
.BI dgit-distro. distro .setup-mergechangelogs
Whether to set up a merge driver which uses dpkg-mergechangelogs for
debian/changelog.  True by default.  Ignored for dgit
setup-mergechangelogs, which does it anyway.
.TP
.BI dgit-distro. distro .setup-gitattributes
Whether to configure .git/info/attributes
to suppress checkin/checkout file content transformations
in new git trees.
True by default.  Ignored for dgit setup-gitattributes, which does it anyway.
.TP
.BI dgit-distro. distro .cmd- cmd
Program to use instead of
.IR cmd .
Works like
.BR \-\- \fIcmd\fR = "... ."
.TP
.BI dgit-distro. distro .opts- cmd
Extra options to pass to
.IR cmd .
Works like
.BR \-\- \fIcmd\fR : "... ."
To pass several options, configure multiple values in git config
(with git config \-\-add).  The options for
.BI dgit.default.opts- cmd
and
.BI dgit-distro. distro /push.opts- cmd
are all used, followed by options from dgit's command line.
.SH ACCESS CONFIGURATION
There are many other settings which specify how a particular distro's
services (archive and git) are provided.  These should not normally be
adjusted, but are documented for the benefit of distros who wish to
adopt dgit.
.TP
.BI dgit-distro. distro .nominal-distro
Shown in git tags, Dgit fields, and so on.
.TP
.BI dgit-distro. distro .alias-canon
Used for all access configuration lookup.
.TP
.BR dgit-distro. \fIdistro\fR /push. *
If set, overrides corresponding non \fB/push\fR config when
.BR readonly=false ,
or when pushing and
.BR readonly=auto .
.TP
.BI dgit-distro. distro .git-url
.TP
.BR dgit-distro. \fIdistro\fR .git-url [ -suffix ]
.TP
.BI dgit-distro. distro .git-proto
.TP
.BI dgit-distro. distro .git-path
.TP
.BR dgit-distro. \fIdistro\fR .git-check " " true | false | url | ssh-cmd
.TP
.BI dgit-distro. distro .git-check-suffix
.TP
.BR dgit-distro. \fIdistro\fR .diverts.divert " " new-distro | / \fIdistro-suffix\fR
.TP
.BI dgit-distro. distro .git-create " " ssh-cmd | true
.TP
.BR dgit-distro. \fIdistro\fR .archive-query " " ftpmasterapi: " | " madison: "\fIdistro\fR | " dummycat: "\fI/path\fR  | " sshpsql: \fIuser\fR @ \fIhost\fR : \fIdbname\fR
.TP
.BR dgit-distro. \fIdistro\fR .archive-query- ( url | tls-key | curl-ca-args )
.TP
.BI dgit-distro. distro .madison-distro
.TP
.BI dgit-distro. distro .archive-query-default-component
.TP
.BI dgit-distro. distro .dgit-tag-format
.TP
.BR dgit-distro. \fIdistro\fR .dep14tag " " want | no [| always ]
.TP
.BI dgit-distro. distro .ssh
.TP
.BI dgit-distro. distro .sshpsql-dbname
.TP
.BR dgit-distro. \fIdistro\fR . ( git | sshpsql ) - ( user | host | user-force )
.TP
.BI dgit-distro. distro .backports-quirk
.TP
.BI dgit-distro. distro .rewrite-map-enable
.TP
.BR dgit-distro. \fIdistro\fR .source-only-uploads " " ok | always | never | not-wholly-new
.TP
.BI dgit.default.old-dsc-distro
.TP
.BI dgit.dsc-url-proto-ok. protocol
.TP
.BI dgit.dsc-url-proto-ok.bad-syntax
.TP
.BI dgit.default.dsc-url-proto-ok
.TP
.BR dgit.vcs-git.suites " \fIsuite\fR[" ; ...]
.SH ENVIRONMENT VARIABLES
.TP
.BR DGIT_SSH ", " GIT_SSH
specify an alternative default program (and perhaps arguments) to use
instead of ssh.  DGIT_SSH is consulted first and may contain arguments;
if it contains any whitespace will be passed to the shell.  GIT_SSH
specifies just the program; no arguments can be specified, so dgit
interprets it the same way as git does.
See
also the \-\-ssh= and \-\-ssh: options.
.TP
.BR DEBEMAIL ", " DEBFULLNAME
Default git user.email and user.name for new trees.  See
.BR "dgit setup-new-tree" .
.TP
.BR gpg ", " dpkg- "..., " debsign ", " git ", " curl ", " dput ", " LWP::UserAgent
and other subprograms and modules used by dgit are affected by various
environment variables.  Consult the documentation for those programs
for details.
.SH BUGS
There should be
a `dgit rebase-prep' command or some such to turn a
fast-forwarding branch containing pseudo-merges
back into a rebasing patch stack.
It might have to leave a note
for a future dgit push.

If the dgit push fails halfway through,
it is not necessarily restartable and
idempotent.
It would be good to check that the proposed signing key is
available before starting work.

dgit's build functions, and dgit push, may make changes to
your current HEAD.  Sadly this is necessary for packages in the `3.0
(quilt)' source format.  This is ultimately due to what I consider
design problems in quilt and dpkg-source.

\-\-dry-run does not always work properly, as not doing some of the git
fetches may result in subsequent actions being different.  Doing a
non-dry-run dgit fetch first will help.
\-\-damp-run is likely to work much better.
.SH SEE ALSO
\fBdgit\fP(7),
\fBdgit-*\fP(7),
\fBcurl\fP(1),
\fBdput\fP(1),
\fBdebsign\fP(1),
\fBgit-config\fP(1),
\fBgit-buildpackage\fP(1),
\fBdpkg-buildpackage\fP(1),
.br
https://browse.dgit.debian.org/