1 dgit (1.2~~) UNRELEASED; urgency=low
3 * Fix manpage typo `dig' for `dgit'.
4 * Fix manpage typo `sourcefull'.
5 * Correct manpage cross-reference to point to browse.d.d.o.
9 dgit (1.1) unstable; urgency=medium
12 * When source package contains things called .git (even files, and even
13 in subdirectories), remove them. Closes:#793671.
14 * Work around curl -sS -I printing `HTTP/1.0 200 Connection established'
15 before the actual header, so dgit works with https_proxy set (!)
16 * --new is needed for read access to packages in NEW, too. Document
17 this, and make it work properly.
18 * Work around #793471 (madness with $SIG{__WARN__} and Perl's system
19 builtin): move $SIG{} setting into setup_sigwarn in Dgit.pm, and
21 * When invoking git-buildpackage via dgit gbp-build, consider our
22 command line arguments when massaging the dpkg-buildpackage arguments,
23 so that we don't end up giving dpkg-buildpackage contradictory
25 * Cope with new git-buildpackage which provides gbp, rather than the
26 eponymous command, on PATH.
29 * Honour dgit-distros.DISTRO.cmd-CMD and .opts-CMD. Closes:#793427.
30 * Make configuration able to prevent dpkg-mergechangelogs setup.
31 * Provide dgit setup-new-tree (like dpkg-setup-mergechangelogs
32 but only does it if not disabled in config).
33 * Set up git user.email and user.name from distro access config
34 or DEBEMAIL/DEBFULLNAME. Closes:#793410.
35 * When key to use not specified any other way, use the debian/changelog
36 trailer line. Closes:#793423.
37 * Honour --git= (mostly).
40 * Fix some manpage typos. [ Richard Hartmann ]
41 * Manpage said that --clean=check was -wn but that is --clean=none;
42 correctly document that --clean=check is actually -wc.
43 * Document that up to -DDDD (not just -DD) is meaningfully different.
44 * Document that -cname=value applies only for this run.
45 * Improve manpage comment about defining a new distro.
46 * Document that --quilt=linear is the default for Debian.
47 * Fix a formatting problem in --build-products-dir= doc.
48 * In manpage, do not seem to imply that NMU should be of only one
50 * Qualify to Debian the manpage comment about how to do NMU.
51 * In discussion on how to start using dgit when already using git, do
52 not imply/assume that existing git history will have identical trees
54 * Remove stray sentence in config section of manpage.
55 * Manpage: Clarify wording of readonly config.
56 * Manpage: Better cross-references for -k and keyid.
57 * dgit(7): No longer say that dgit-repos lives on Alioth.
60 * Introduce more sophisticated protocol negotiation for rpush.
61 * Do not quote `:' in shellquote.
62 * Print a supplementary message when push fails, giving advice to
63 the user about how to retry. Closes:#793144.
64 * Slurp in entire git config, for better performance.
65 * Rename `git-build' operation to `gbp-build' to make it clearer what
66 it's for. Keep the old name as an alias.
67 * Show `dgit sbuild' in usage message.
68 * When we are using dpkg-buildpackage to clean before using it to also
69 do the build, let it do its cleaning thing as part of its run, rather
70 than running it twice. When we are _not_ supposed to be using
71 dpkg-buildpackage to clean, but we are running it to do the build,
73 * Also suppress spurious runs of the clean target when building using
75 * When exec fails, always print the program name in the error message.
78 * Infrastructure: Get mirroring right for fresh repos of existing
81 Packaging, cleanups, debugging and test suite:
82 * Fix Vcs-Git and Vcs-Browse to refer to chiark. (The dgit-repos on
83 alioth aren't suitable right now because the master there can
84 currently only be updated with an actual upload, ie dgit push.)
85 * Make warnings fatal in dpkg-repos-admin-debian, dgit-ssh-dispatch
86 (using setup_sigwarn).
87 * Make warnings fatal in tstunt/dpkg-parsechangelog (directly).
88 * Test suite: Honour DGIT_TEST_DEBUG=''.
89 * With -DDDD, print out all gitcfg references (copious!)
90 * Fix a debug message in the obsolete sshpsql archive access driver.
91 * Test suite: More automatic enumeration of tests.
92 * Test suite: Provide tests which check that all our various build
93 operations run the right targets as expected (ie, that we are massaging
94 the arguments to dpkg-buildpackage, and suppressing our clean target,
97 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Mon, 27 Jul 2015 16:34:31 +0100
99 dgit (1.0) unstable; urgency=medium
102 * Switch to new production git repositories for reading.
103 (this can no longer divert to alioth). Public readonly access
104 now works. Closes:#791447.
105 * Memoise git config lookups (big speedup!)
106 * Provide -wdd aka --clean=dpkg-source-d. Closes:#792433.
107 * Provide -wc aka --clean=check.
110 * Remove some obsolete caveats from BUGS.
111 * Reorganise and complete the configuration section.
112 * Remove obselete comment about DMs not being able to push.
113 We have, for now, a way to add keys manually. Closes:#720173.
116 * Remove configuration relating to alioth.
117 * Provide for different access mechanisms when pushing.
118 * Provide for configurable git url suffix.
119 * Allow git-url to be '' to force fallback to git-proto etc.
120 * Provide for checking git presence via http[s].
121 * Do some quoting on debug output (needed if the server might not
122 be trustworthy and might send us bad stuff).
123 * Talk to push.dgit.debian.org, rather than the .debian.net alias.
126 * Provide for mirroring git updates to a different server.
127 * Provide cgit-regen-config command for cgi-grnet-01.
128 * Make dgit-ssh-dispatch not spew (harmless) warnings if caller
129 tries for a shell session (ie SSH_ORIGINAL_COMMAND not set).
132 * Remove an obsolete comment from the code.
133 * Improve an error message from dgit-repos-policy-debian.
134 * Test suite: Break out t-make-hook-link.
135 * Fix a manpage typo.
137 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 19 Jul 2015 22:15:53 +0100
139 dgit (0.30) unstable; urgency=high
141 INCOMPATIBLE CHANGES:
143 * Client uses new infrastructure:
144 - Check for new dgit git service on dgit-git.debian.net (ie
145 gideon.debian.org), with transition plan based on diversion feature.
147 - Old versions of dgit will stop working when the server-side handle is
150 * dgit git trees no longer contain .pc for format `3.0 (quilt)' source
151 packages. Closes:#764606.
152 - It is deleted whenever we find it.
153 - Older versions of dgit will choke on trees without .pc.
154 - (When doing quilt fixup, we recreate a suitable .pc in a temporary
155 directory so that we can do dpkg-source --comit.)
157 * All users are urged to upgrade ASAP.
159 Other significant improvements:
161 * When generating quilt patches, try to linearise the git history into a
162 series of individual new patches for debian/patches. Closes:#770710.
164 * When receiving a push with dgit-repos-server, update the server's
165 refs/heads/master if we are pushing to what the distro regards as a
166 relevant branch, and the push would ff master. Closes:#728209.
168 * For non-Debian distros, distro version release tags contain distro
169 name a la DEP-14 (rather than hardcoding `debian/').
171 * Set up a merge driver for debian/changelog. Closes:#769291.
173 * --clean=git and --clean=none cause dgit to pass -nc to
174 dpkg-buildpackage, suppressing calls to the package's clean target.
175 Also, expand the documentation in this area slightly. Closes:#768590.
177 * Provide --clean=git-ff (aka -wgf), which is useful for dgit itself (!)
181 * Reduce some noise output and improve the clarity of some messages.
182 * Be more careful about tag updates during fetch: only update tags
183 referring to uploads to distro we are trying to fetch from.
184 * Change realpath dependency to `coreutils (>= 8.23-1~) | realpath'
189 * Fix handling of rmadison-based and gitless distros (e.g., Ubuntu).
190 * Add missing `gpgv' to test dependencies in debian/tests/control.
191 * Strip `-b <branch>' from contents of Vcs-Git header, when setting up
192 the vcs-git remote. Closes:#759374.
193 * Do not offer wget as an alternative dependency to curl. We always
194 unconditionally invoke curl and have no code to use wget.
196 * Complain about lack of cuddled values for value-taking single-letter
197 options, rather than thinking the user meat an empty value.
199 * Reject (rather than ignoring) further options merged witth -wn, -wg,
201 * Fix inaccurate error message when archive's git hash is not an
202 ancestor of git repo's git hash.
203 * Detect and bomb out on vendor-specific `3.0 (quilt)' patch series.
204 * Fix the rules clean target to remove test results and output.
206 Documentation improvements:
208 * Break out dgit(7) from dgit(1).
209 * Provide example workflow for dgit rpush. Closes:#763334.
210 (Also part of the fix for #768470.)
211 * Document that dgit repos are cloneable with git, in dgit(1)
212 section MODEL. [Andreas Barth.] Closes:#768470.
213 * Better documentation for quilt series handling.
214 * Document under `dgit push' that it is best to build with dgit too.
216 * Other minor clarifications and improvements.
218 Behind-the-scenes work:
220 * Use ftpmasterapi archive query method.
221 (Closes:#727702. Also partly obsoletes #768470.)
222 * New dgit-infrastructure binary package containing dgit-repos-server et
223 al. Client users probably don't want this stuff. Also, it provides a
224 convenient way to publish the dependencies.
225 * Many many bugfixes to the server side (dpkg-repos-server et al.).
226 * Add :..; prefix to ssh remote commands, for the benefit of future
227 forced command wrappers. Implicitly, this defines a new ssh-based
228 command protocol. Closes:#720174, #720175.
229 * Distro access configuration handling changes (should not be noticeable
231 * In places, significant restructuring or tidying up.
232 * Turn all perl warnings into errors using $SIG{__WARN__}.
234 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 05 Jul 2015 01:34:55 +0100
236 dgit (0.22.1) unstable; urgency=high
238 * Use Dpkg::Version::version_compare everywhere, not
239 Dpkg::Version::version_compare_string. The latter is entirely wrong,
240 meaning that dgit would get many version comparisons wrong.
243 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Tue, 04 Nov 2014 12:46:40 +0000
245 dgit (0.22) unstable; urgency=medium
248 * Clone removes destination directory on error. Closes:#736153.
249 * Work with wheezy-backports (and keep squeeze-backports working too).
251 * Work in read-only no-git-history mode with Ubuntu. You still have
252 to pass -dubuntu. Closes:#751781.
253 * Use mirror.ftp-master.debian.org DNS alias rather than coccia.
255 * Check hashes of files ourselves rather than running dget to
256 re-retreive the .dsc.
257 * Check SHA-256 of .dsc against hash from archive_query (ie projectb)
258 rather than letting dpkg-source do a signature verification.
259 Closes:#737619. Closes:#737625.
260 * Treat .dsc as bytes, just like everything else, rather than letting
261 HTTP::Message convert it to a Perl unicode string which the rest of
262 the program mishandles. Closes:#738536.
265 * Include canonicalised suite name in signed tag message.
266 * Mention cross-version dgit rpush incompatibility in manpage.
267 * Check for rpush protocol version incompatibility and crash early
269 * New script tests/using-intree for running tests on the source tree.
270 * Do not spew diff output to terminal (by default). Print sensible
271 message instead. Closes:#736526.
272 * Print better message for lack of configuration settings.
273 * Document that dgit rpush needs gnupg and your public key on the build
274 host. Closes:#736529.
275 * Fix a manpage reference to `--dget=' where `--dgit=' was intended.
276 * Provide t-archive-process-incoming and t-archive-query subroutines for
277 regression test scripts to use.
278 * Print better message for unknown operations.
279 * Provide `dgit clean'. Closes:#736527.
280 * When cloning, set up a remote `vcs-git' from the package's Vcs-Git
281 (and put an appropriate caveat in the manpage). Closes:#740687.
283 * Improve error message for .dsc having already been signed (iff
284 using libdpkg-perl 1.17.x). Closes:#731635.
285 * Improve error message for .dsc parsing failures more generally.
286 * Better reporting of child exit statuses (esp. deaths due to signals).
287 * In rpush, on protocol error talking to build host, check if the
288 subprocess died and report differently if so. Closes:#736528.
289 * Fixed a manpage typo.
290 * When tests invoke dgit, use --dgit= so that subprocesses use our
291 dgit rather than system one.
292 * Add a test for dgit rpush.
294 Major new feature, currently stalled awaiting server infrastructure:
295 * dgit-repos-server: New program for receiving signed-tag-based
296 pushes. Corresponding support in dgit itself, but not currently
297 used by default for any distro.
298 * Bring forward push of the version tag ref so it happens alongside
299 the push of the suite branch ref.
300 * New git-check and git-create methods "true" which are no-ops.
301 * test-dummy-drs `distro': for testing dgit and dgit-repos-server.
303 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Tue, 19 Aug 2014 11:24:02 +0100
305 dgit (0.21) unstable; urgency=medium
307 Bugfixes relating to unclean trees:
308 * Run a clean (of the specified type) before any build operation; do
309 this with `dpkg-buildpackage -T' clean if necessary, so -wd now works
310 with all the building methods.
311 * Refuse to do quilt fixup (explicitly requested, or as a result of
312 build) if the tree contains ignored files. Closes:#731632.
314 Error message improvements:
315 * Use failedcmd to report errors when ssh psql fails. Closes:#734281.
316 * failedcmd prints $us, not $_[0] - ie, dgit doesn't pretend,
317 in the error message, to be its child.
318 * Do not report the (irrelevant) $? when madison parsing fails.
320 Better workflow flexibility:
321 * Provide --build-products-dir option (and corresponding semantics
322 for -C) to specify where to find the files to upload. Closes:#731633.
324 Support for Debian backports suites:
325 * New quirks infrastructure in configuration and internals,
326 for suites (or perhaps distros) which are a bit like others.
327 * Use correct default archive location.
328 * Compute "-v" option default value correctly.
331 Packaging improvement:
332 * Add `Testsuite: autopkgtest' to debian/control. (This will only have
333 the right effect with recent enought dpkg; it will generate a harmless
334 warning with earlier versions of dpkg.)
336 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 19 Jan 2014 02:14:25 +0000
338 dgit (0.20) unstable; urgency=high
340 * Use newest (not oldest) version currently in suite when calculating
341 what value to use for -v<version> by default. Closes:#732781.
343 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 21 Dec 2013 19:13:56 +0000
345 dgit (0.19) unstable; urgency=low
348 * Provide "test-dummy" distro with "dummycat" access method.
349 * Provide a selection of autopkgtest (DEP-8) tests.
351 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Wed, 27 Nov 2013 18:27:17 +0000
353 dgit (0.18.2) unstable; urgency=high
355 Bump archive upload urgency to high.
357 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 24 Nov 2013 17:42:57 +0000
358 dgit (0.18.1) unstable; urgency=low
361 * sshpsql archive query method passes LANG=C. Closes:#729788.
362 * Subcommand program or argument options containing hyphens work.
363 (Eg, --dpkg-buildpackage:blah was previously incorrectly rejected.)
367 * Depend on curl | wget, as dget needs one of those. (The dput package,
368 which contains dget, doesn't require them because dput itself works
371 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 24 Nov 2013 17:36:03 +0000
373 dgit (0.18) unstable; urgency=low
376 * Remote push (dgit rpush), a la debsign -r. Closes:#721185.
379 * dgit build, by default, uses the archive to find out what the correct
380 -v<version> option is to pass to dpkg-genchanges. Closes:#727200.
381 * Abolish the sshdakls method and replace it with sshpsql: that is, ssh
382 (to coccia, by default) and run sql commands on the ftpmaster
383 database. This is faster and has fewer bugs but is vulnerable to db
384 schema changes. Closes:#726955. Closes:#720170. Closes:#720176.
385 * When generating git tags, quote the (uncanonicalised) changelog's
386 Distribution field as the suite.
387 * Command execution reports from --dry-run go to stderr.
390 * Support --gpg=... to provide a replacement command for gpg.
391 * Support --ssh=... and --ssh:... to affect how we run ssh.
394 * When using sbuild, pass the arguments to mergechanges in the right
395 order so that we use the correct Description (the _source one,
396 not the one from sbuild which didn't get e.g. -v<version>).
397 * push actually takes an optional suite, like it says in the synopsis.
399 * Fix dgit --damp-run sbuild to actually work.
400 * Fix the "shellquote" internal subroutine. The bugs in it ought not to
401 have caused any real trouble in previous versions of dgit.
403 Documentation and message fixes:
404 * manpage: Clarify comments about orig tarballs. Closes: #723605.
405 * manpage: Remove comment in BUGS about lack of policy docs
406 for Dgit field, which is specified now. Closes:#720201.
407 * manpage: Make discussion of --existing-package less scary. The
408 default archive access method no longer needs it. Closes:#720171.
409 * Mention "git merge", not "git-merge", in helpful message.
412 Internal and debugging improvements:
413 * Report chdir actions in debugging output.
414 * Improvements to implementation of --dry-run and --damp-run.
415 * Some code motion and cleanups.
417 Note: changelog entries for the following versions, which were uploaded
418 to Debian experimental, have been collapsed into this single entry:
419 0.18~experimental2 0.18~experimental1
420 0.17~experimental7 0.17~experimental6 0.17~experimental5
421 0.17~experimental4 0.17~experimental3 0.17~experimental2
423 0.16~experimental3 0.16~experimental2 0.16~experimental1
424 We do describe here all the changes since 0.17.
426 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 09 Nov 2013 10:12:13 +0000
428 dgit (0.17) unstable; urgency=high
430 * Do not grobble around in .git/refs/; instead, use git-show-ref.
431 This avoids breaking when git makes packed refs. Closes:728893.
432 * Clarify error message for missing refs/remotes/dgit/dgit/<suite>.
434 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 07 Nov 2013 00:02:47 +0000
436 dgit (0.16) unstable; urgency=high
438 * Format `(3.0) quilt' fixup does not mind extraneous other files
439 in the build tree (e.g., build products and logs). Closes: #727053.
440 * Set autoflush on stdout, to get better ordering of debugging
441 etc. output when stdout is redirected.
442 * New --damp-run mode, for more convenient and fuller testing etc.
444 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Tue, 22 Oct 2013 13:06:54 +0100
446 dgit (0.15) unstable; urgency=low
448 * Better handling of packages pushed using dgit and stuck in NEW.
449 (And, use of `--new' is not needed with fetch.) Closes: #722199.
450 * More comprehensive warnings in many cases of archive skew.
451 * Implement `dgit help' as well as `--help'. Closes: #721661.
452 * Provide `dgit version' and `--version'. Closes: #721654.
454 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 12 Sep 2013 00:14:05 +0100
456 dgit (0.14) unstable; urgency=low
458 * Include package name in tag message.
459 * Create directory .git/dgit when needed during build. Closes: #721428.
460 * Add Vcs-Git and Vcs-Browser [Richard Hartmann]. Closes: #721404.
461 These fields refer to the development branch, "master", on alioth,
462 not to the dgit suite refs (which are not accessible to git clone).
464 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 01 Sep 2013 18:30:44 +0100
466 dgit (0.13) unstable; urgency=low
468 * Reuse already-downloaded .orig files after checking their hashes.
469 Closes: #720526. (This introduces a dependency on Digest::SHA.)
470 * Do not always pointlessly fetch the .dsc twice. (That code was
471 erroneously duplicated during editing, apparently.)
472 * Remove DGET_UNPACK from the environment in case the user has set it.
473 * Remove scary warning from Description.
474 * When uploading to Debian, tell dput to upload to "ftp-master". This
475 avoids problems with derivatives whose dput has a different default.
477 * Fix some bugs in dgit fetch --dry-run which made dgit push
478 --dry-run often not work at all.
479 * Update the local tracking branch for the dgit remote, when pushing.
481 * Fix references in manpage to old Vcs-Dgit-Master field name.
482 * Reorganise manpage sections to be in a more conventional order.
483 * New manpage section on FILES IN THE SOURCE PACKAGE BUT NOT IN GIT.
486 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 29 Aug 2013 00:27:23 +0100
488 dgit (0.12) unstable; urgency=low
490 * Cope with packages with epoch. Closes: #720897.
491 * Improve error message for non-fast-forward push. Closes: #720896.
492 * New --ignore-dirty option to skip noncritical check. Closes: #720895.
493 * New --no-quilt-fixup option to suppress quilt fixup. RTFM.
494 * Add Closes line for #720595 to changelog entry for 0.11.
496 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Mon, 26 Aug 2013 16:50:39 +0100
498 dgit (0.11) unstable; urgency=low
500 * Location of dgit-repos is now git.debian.org:/git/dgit-repos/repos.
501 Closes: #720525. The rename on the server side will break older
503 * Fix bug which would make quilt patch fixup fail if git status
505 * Autogenerated quilt patch fixup patch Description contains several
506 recent git commits, rather than implying that the patch corresponds
507 exactly to the top git commit.
508 * Use "ftp.debian.org" not "http.debian.net" as the default Debian
509 archive. (http.debian.net tends to defeat certain kinds of cacheing,
510 and can also have more skew.)
511 * dgit build uses dpkg-buildpackage; there is a dgit git-build
512 for using git-buildpackage. Closes: #720595.
513 * Better error message for use of UNRELEASED suite. Closes: #720523.
514 * Do not canonicalise suite more than once. Related to: #720526.
515 * Fix a badly open-coded copy of check_not_dirty. Closes: #720524.
516 * Fix some bugs in building (eg build-source would fail to do the quilt
517 fixup; the --clean check in build was wrong).
518 * Add missing dependency on realpath.
519 * git-build (git-buildpackage wrapper) does not bother canonicalising
520 the suite if --git-ignore-branch is used.
522 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 25 Aug 2013 17:00:43 +0100
524 dgit (0.10) unstable; urgency=low
526 * Create .pc/applied-patches - do not empty it (!)
528 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 25 Aug 2013 00:51:50 +0100
530 dgit (0.9) unstable; urgency=low
532 * New cleaning arrangements.
533 * More comprehensive workaround for `3.0 (quilt)'.
534 * In push, double-check the .changes against the changelog.
535 * Better error when source package contains .git. Closes: #720555.
536 * Change our .dsc field name to `Dgit'. Relevant to #720201.
537 * Fix bug handling our synthetic merges when we see them in
538 the remote suite branch.
539 * `3.0 (quilt)' fixup creates .pc/applied-patches since modern
540 dpkg-source creates it even though old ones didn't always.
542 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 24 Aug 2013 18:49:02 +0100
544 dgit (0.8) unstable; urgency=low
546 * Fix comparison of archive's .dsc's hash and git branch head
548 * When creating repos in dgit-repos (using the ssh-cmd method),
549 copy _template rather than using mkdir and git init.
551 * In push, do git fetch as well as archive fetch, or archive
554 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 23 Aug 2013 12:24:09 +0100
556 dgit (0.7) unstable; urgency=low
558 * If dak ls, or rmadison, reports multiple versions, look for them
559 all, and pick the newest .dsc that doesn't give 404.
560 * Manpage formatting fix.
561 * Name the local remote tracking branch remotes/dgit/dgit/<suite>
562 so that we avoid a warning from git about ambiguous branch names.
564 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 18:29:10 +0100
566 dgit (0.6) unstable; urgency=low
568 * Allow fetching when archive has out-of-date git hash in .dsc.
571 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 16:02:10 +0100
573 dgit (0.5) unstable; urgency=low
575 * Upload to unstable, as this version mostly works. (All the RC
576 bugs of which I'm aware are now properly represented in the BTS.)
578 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 15:38:00 +0100
580 dgit (0.4~pre2) experimental; urgency=low
582 * Mangle debian/<version> tags the way git-buildpackage does
583 (as of git-buildpackage 0.5.5, 3c6bbd0f4992f8da).
584 * Support dgit-distro.<distro>.keyid config option.
585 * Revert change to ssh to alioth CNAME, as the recommended CNAME
586 is to something with no write access to the fs and the new CNAME
587 has not yet been set up. This reintroduces #720172 :-/.
589 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 15:31:17 +0100
591 dgit (0.4~pre1) experimental; urgency=low
593 * Use dgit.debian.net vhost on alioth. Closes:#720172.
594 * Usage message. Closes:#720085.
595 * Provide "dgit sbuild".
596 * Assorted manpage fixes and improvements.
597 * Fail if a required config item is missing.
598 * Much better error messages.
599 * Better error checking when parsing RFC822-style control data.
600 * Better checking that the supplied .dsc and debian/changes correspond.
601 * Ordering improvement in push: don't add dsc field until git push done.
602 * New --distro option (helps with unknown suites).
605 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 13:36:44 +0100
607 dgit (0.3) experimental; urgency=low
609 * New version which appears to be able to sort of work at least
612 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 17 Aug 2013 09:18:04 +0100
614 dgit (0.2) experimental; urgency=low
616 * New version which might actually work but probably won't.
618 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 16 Aug 2013 16:52:17 +0100
620 dgit (0.1) experimental; urgency=low
622 * Initial experimental (partial) version.
624 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 15 Aug 2013 12:09:01 +0100