adafruit-powerboost: 1000: wip windows

[reprap-play.git] / adafruit-powerboost-1000.scad

diff --git a/adafruit-powerboost-1000.scad b/adafruit-powerboost-1000.scad
index 1cdecc4c288313e3ee588f7f2403ea3325602e6c..23aac1b4cc5cc58bd4270729e5362ff406cf5adc 100644 (file)
--- a/adafruit-powerboost-1000.scad
+++ b/adafruit-powerboost-1000.scad
@@ -9,10 +9,47 @@ psu_hole_pos = [ 2.05, // from back edge of psu_sz[0]
                 0.55 * 0.5 * 25.4, // from centreline
                 ];
 
+psu_baffle_cnr_y = 7.45; // from connector end
+psu_baffle_th = [ 0.8, 3.5 ];
+psu_usbend_led_x = 4.5;
+psu_innerend_led_depth = 10;
+
 // ----- calculated -----
 
+psu_usbend_led_depth = psu_baffle_cnr_y*2 - psu_usbend_led_x;
+
 module PsuLedBafflePlan(){
 }
 
 module PsuLedWindowsPlanCore(){
+  difference(){
+    union(){
+      // Two LEDs incl "Chrg", one side of inlet connector
+      AtPsuMountCorner(0,0) {
+       rectfromto([ -(psu_board_support_wall + 0.1),
+                    +psu_usbend_led_x ],
+                  [ psu_sz[0]/2,
+                    +psu_usbend_led_depth ]);
+      }
+
+      // One LED, "Low", other side of inlet connector
+      AtPsuMountCorner(1,0) {
+       sz = psu_baffle_cnr_y - psu_board_support_wall - psu_baffle_th[0];
+       translate([0, psu_baffle_cnr_y])
+         rectfromto([ -(psu_board_support_wall + 0.1),
+                      -sz/2 ],
+                    [ psu_sz[0]/2,
+                      +sz/2 ]);
+      }
+
+      // One LED, PWR, near outlet USB pads
+      AtPsuMountCorner(1,1){
+       rectfromto([0,0],
+                  [psu_sz[0]/2 - psu_hole_pos[1] - psu_hole_dia/2,
+                    psu_innerend_led_depth]);
+      }
+    }
+//    translate([0, -psu_sz[1]/2])
+//      square(center=true, [psu_baffle_th[1], psu_sz[1]]);;
+  }
 }