0.55 * 0.5 * 25.4, // from centreline
];
+psu_baffle_cnr_y = 7.45; // from connector end
+psu_baffle_th = [ 0.8, 3.5 ];
+psu_usbend_led_x = 4.5;
+psu_innerend_led_depth = 10;
+
// ----- calculated -----
+psu_usbend_led_depth = psu_baffle_cnr_y*2 - psu_usbend_led_x;
+
module PsuLedBafflePlan(){
}
module PsuLedWindowsPlanCore(){
+ difference(){
+ union(){
+ // Two LEDs incl "Chrg", one side of inlet connector
+ AtPsuMountCorner(0,0) {
+ rectfromto([ -(psu_board_support_wall + 0.1),
+ +psu_usbend_led_x ],
+ [ psu_sz[0]/2,
+ +psu_usbend_led_depth ]);
+ }
+
+ // One LED, "Low", other side of inlet connector
+ AtPsuMountCorner(1,0) {
+ sz = psu_baffle_cnr_y - psu_board_support_wall - psu_baffle_th[0];
+ translate([0, psu_baffle_cnr_y])
+ rectfromto([ -(psu_board_support_wall + 0.1),
+ -sz/2 ],
+ [ psu_sz[0]/2,
+ +sz/2 ]);
+ }
+
+ // One LED, PWR, near outlet USB pads
+ AtPsuMountCorner(1,1){
+ rectfromto([0,0],
+ [psu_sz[0]/2 - psu_hole_pos[1] - psu_hole_dia/2,
+ psu_innerend_led_depth]);
+ }
+ }
+// translate([0, -psu_sz[1]/2])
+// square(center=true, [psu_baffle_th[1], psu_sz[1]]);;
+ }
}