. "$KEYSLIB"/keyfunc.sh
defhelp <<HELP
-KEEPER [INDICES ...]
+[-pt] KEEPER [INDICES ...]
Typeset cards for a set of keeper secrets.
-This program writes a file KEEPER.ps which will contain private keys from the
+This program creates a set of printable cards containing key nubs from the
keeper set KEEPER, specifically the keys with the given INDICES. Elements of
the list are either simple integers or ranges [LOW]-[HIGH]; if LOW is
omitted, it means 0, and if HIGH is omitted, it means the highest possible
index. If no INDICES are given then all secret keys are written.
The public keys are found in $KEYS/keeper/KEEPER/I.pub;
-private keys are read from KEEPER/I in the current directory.
+key nubs are read from the safe place where \`keys new-keeper' left
+them.
+
+If the \`-p' option is given, then the output is a PostScript file which
+can be printed immediately. If the \`-t' option is given, then the output
+is a \`tar' archive containing a TeX source file and images, which must
+be processed using \`latex' and \`dvips'. The default is \`-t'.
HELP
+## Read options.
+mode=tar
+while getopts "pt" opt; do
+ case "$opt" in
+ p) mode=ps ;;
+ t) mode=tar ;;
+ *) usage_err ;;
+ esac
+done
+shift $(( $OPTIND - 1 ))
+
## Parse the command line.
case $# in 0) usage_err ;; esac
keeper=$1; shift
checkword "keeper set label" "$keeper"
+
+## Find out about the set.
+if [ ! -f $KEYS/keeper/$keeper/meta ]; then
+ echo >&2 "$quis: unknown keeper set \`$keeper'"
+ exit 1
+fi
read n hunoz <$KEYS/keeper/$keeper/meta
+## Check that nubs are available for the keeper set.
+reqsafe
+if [ ! -d $SAFE/keys.keeper/$keeper/ ]; then
+ echo >&2 "$quis: no nubs available for keeper set \`$keeper'"
+ exit 1
+fi
+cd $SAFE/keys.keeper/$keeper/
+
## Build a colon-separated list of the indices we actually want.
want=:
case $# in 0) set 0- ;; esac
mktmp
umask 077
exec 3>$tmp/$keeper.tex
-cat >&3 <<'EOF'
-\documentclass[a4paper, landscape, 12pt]{article}
-\usepackage[utf8]{inputenc}
-\usepackage[T1]{fontenc}
-\usepackage[palatino, helvetica, courier, maths = cmr]{mdwfonts}
-\usepackage{graphicx}
-
-%% Report errors with enough context that we can debug them.
-\errorcontextlines=999
-
-%% Basic layout for the cards. We use the paragraph filling machinery, but
-%% don't actually need most of the trimmings.
-\parindent=0pt
-\parfillskip=0pt
-\pagestyle{empty}
-
-%% Page layout: try to use most of the page. The document class will already
-%% have set up the paper size, but we do the rest here.
-\hoffset=-1in \voffset=-1in
-\oddsidemargin=20mm
-\textwidth=\paperwidth \advance\textwidth by -2\oddsidemargin
-\topmargin=20mm
-\headheight=0pt \headsep=0pt
-\textheight=\paperheight \advance\textheight by -2\topmargin
-\AtBeginDocument{\special{papersize=\the\paperwidth,\the\paperheight}}
-
-%% Parameters for the cards and guide rules.
-\newdimen\cardwd \cardwd=82mm
-\newdimen\cardht \cardht=49mm
-\newdimen\guidelen \guidelen=10mm
-\newdimen\rulewd \rulewd=0.6pt
-
-%% Typesetting the secret as text. The macro \snarf TOKEN T0 T1 ... T7
-%% gathers T0 T1 ... T7 into a single argument and passes them to TOKEN, as
-%% long as T0 is not \relax. We use this to process the secret text in a
-%% continuation-passing style.
-\def\snarf#1#2{%
- \ifx#2\relax\let\next\empty%
- \else\def\next{\snarfdo#1#2}%
- \fi%
- \next%
-}
-\def\snarfdo#1#2#3#4#5#6#7#8#9{#1{#2#3#4#5#6#7#8#9}}
-
-%% Print the left and right halves of the line, with a separator. Use boxes
-%% for the lines so that TeX will work out the width of the enclosing vbox
-%% for us. The basic usage is \line TEXT \relax ... \relax, with eight
-%% \relax tokens: this is enough to complete both \snarf calls.
-\def\line{\snarf\lineleft}
-\def\lineleft#1{\hbox\bgroup#1 \snarf\lineright}
-\def\lineright#1{#1\egroup\line}
-
-%% Typeset a card containing a secret. Usage is \card{INDEX}{SECRET}.
-\def\card#1#2{%
- %%
- %% Make sure we're setting a paragraph.
- \leavevmode%
- %%
- %% Initial material: a stretchy space on the left.
- \hbox{}\nobreak\hfil%
- %%
- %% An alignment for the guide markers surrounding the actual card.
- \vbox{\halign{&##\cr%
- %%
- %% Top left guides.
- \vrule width \guidelen height \rulewd depth 0pt%
- \vrule width \rulewd depth 0pt height \guidelen%
- &%
- %%
- %% Top centre gap.
- \hfil%
- &%
- %%
- %% Top right guides.
- \vrule width \rulewd depth 0pt height \guidelen%
- \vrule width \guidelen height \rulewd depth 0pt%
- \cr%
- %%
- %% Left gap.
- &%
- %%
- %% The actual card.
- \vbox to \cardht{%
- %%
- %% We actually do more or less sensible typesetting. TeX will set the
- %% box width from the hsize, and we should leave a small margin all
- %% around.
- \parfillskip=0pt plus 1fil%
- \leftskip=1em \rightskip=1em%
- \hsize=\cardwd%
- %%
- %% The heading.
- \hrule height 0pt \prevdepth = 0pt%
- \medskip%
- {\large\bfseries\textsf{\keeper} secret #1/\total}%
- %%
- %% The QR-code and the text of the secret.
- \vfil%
- $%
- \vcenter{\hbox{\includegraphics[scale = 2.4]{#1.eps}}}%
- \hfil%
- \vcenter{\ttfamily%
- \line#2%
- \relax\relax\relax\relax\relax\relax\relax\relax%
- }%
- $%
- %%
- %% And we're done.
- \vfil%
- }%
- &%
- %%
- %% Right gap.
- \cr%
- %%
- %% Bottom left guides.
- \vrule width \guidelen depth \rulewd height 0pt%
- \vrule width \rulewd depth \guidelen height 0pt%
- &%
- %% Bottom centre gap.
- \hfil%
- &%
- %% Bottom right guides.
- \vrule width \rulewd depth \guidelen height 0pt%
- \vrule width \guidelen depth \rulewd height 0pt%
- \cr%
- %%
- %% Leave a small vertical space at the bottom to separate lines of cards.
- \strut \cr%
- }}%
- %%
- %% End material: a stretchy space to match the one at the start, and then
- %% allow a break.
- \nobreak\hfil\hbox{}%
- \penalty0%
-}
-EOF
+cat >&3 $ETC/keeper-cards.tex
## Write the basic configuration stuff.
cat >&3 <<EOF
while [ $i -lt $n ]; do
case $want in
*:"$i":*)
- read secret <$keeper/$i
- tr -d '\n' <$keeper/$i | qrencode -m0 -s1 -o$tmp/$i.png
+ read secret <$i
+ tr -d '\n' <$i | qrencode -m0 -s1 -o$tmp/$i.png
convert $tmp/$i.png $tmp/$i.eps
cat >&3 <<EOF
\card{$i}{$secret}
\end{document}
EOF
exec 3>&-
-if ! (cd $tmp
- exec </dev/null >tex.out 2>&1
- latex $keeper.tex && dvips -o$keeper.ps $keeper.dvi); then
- echo >&2 "$quis: document formatting failed"
- sed >&2 's/^/| /' $tmp/tex.out
- exit 1
-fi
-cp $tmp/$keeper.ps .
+
+case $mode in
+ ps)
+ if ! (cd $tmp
+ exec </dev/null >tex.out 2>&1
+ latex $keeper.tex && dvips -o$keeper.ps $keeper.dvi); then
+ echo >&2 "$quis: document formatting failed"
+ sed >&2 's/^/| /' $tmp/tex.out
+ exit 1
+ fi
+ cat $tmp/$keeper.ps
+ ;;
+ tar)
+ (cd $tmp; tar cf - $keeper.tex *.eps)
+ ;;
+esac
###----- That's all, folks --------------------------------------------------
~mdw / distorted-keys / blobdiff