4 DisOrder is a multi-user software jukebox.
5 * It can play either selected tracks or pick tracks at random.
6 * It supports OGG, MP3, FLAC and WAV files, and can be configured to support
7 anything you can supply a player for (up to a point).
8 * It supports both ALSA and OSS and can also broadcast an RTP stream over a
9 LAN; a player for the latter is included.
10 * Tracks may be selected either via a hierarchical interface or by a fast
12 * It has a web interface (allowing access from graphical web browsers) and a
13 GTK+ interface that runs on Linux and Mac systems.
14 * Playing tracks can be paused or cancelled ("scratched").
16 See CHANGES for details of recent changes to DisOrder.
18 The server supports Linux and can be made to work on a Mac (see README.mac).
19 The clients work on both Linux and the Mac. It could probably be ported to
20 some other UNIX variants without too much effort. Things you will need:
24 libdb 4.3.29 4.2 and earlier won't work
27 libpcre 6.7 need UTF-8 support
36 Python 2.4.4 (optional)
37 GTK+ 2.8.20 (if you want the GTK+ client)
38 GLIB 2.12.4 (if you want the GTK+ client)
40 "Tested" means I've built against that version; earlier or later versions will
45 + Apache 1.3.x works for me, but anything that supports CGI and
46 authentication should be suitable.
47 * Separate player programs are no longer required (but may still be used)
49 Development dependencies (only developers will need these):
50 Automake 1.10 AM_PATH_PYTHON not good enough in 1.7
52 Libtool 1.5.22 1.4 not good enough
55 On Debian you might ensure you have the required packages as follows:
56 apt-get install gcc libc-dev automake autoconf libtool libgtk2.0-dev \
57 libgc-dev libgcrypt-dev libpcre3-dev libvorbis-dev \
58 libao-dev libmad0-dev libasound2-dev libdb4.3-dev \
62 http://www.chiark.greenend.org.uk/mailman/listinfo/sgo-software-discuss
63 - discussion of DisOrder (and other software), bug reports, etc
64 http://www.chiark.greenend.org.uk/mailman/listinfo/sgo-software-announce
65 - announcements of new versions of DisOrder
71 "This place'd be a paradise tomorrow, if every department had a supervisor
74 NOTE: If you are upgrading from an earlier version, see README.upgrades.
76 On a Debian system, if you install from .deb files then you should be able to
77 skip steps 1 to 6 and configure it via debconf. This is strongly recommended!
79 1. Build the software. Do something like this:
81 ./configure --sysconfdir=/etc --localstatedir=/var
84 See INSTALL for more details about driving configure. The precise set of
85 options you pass to configure is up to you, if you like configuration being
86 in /usr/local/etc or wherever then that should work.
88 If you only want to build a subset of DisOrder, specify one or more of the
90 --without-server Don't build server or web interface
91 --without-gtk Don't build GTK+ client (Disobedience)
92 --without-python Don't build Python support
94 See README.client for setting up a standalone client (or read the
95 disobedience man page).
97 2. Install it. Most of the installation is done via the install target:
99 make installdirs install
101 The CGI interface has to be installed separately; see under 'Web Interface'
104 3. Create a 'jukebox' user and group, with the jukebox group being the default
105 group of the jukebox user. The server will run as this user and group.
106 Check that this user can read your music files and write to the audio
107 device, e.g. by playing a track. The exact name doesn't matter, it could be
108 'jukebox' or 'disorder' or 'fred' or whatever.
110 Do not use a general-purpose user or group, you must create ones
111 specifically for DisOrder.
113 4. Create /etc/disorder/config. Start from examples/config.sample and adapt it
114 to your own requirements. The things you MUST do are:
115 * edit the 'collection' command to identify the location(s) of your own
116 digital audio files. These commands also specify the encoding of
117 filenames, which you should be sure to get right as recovery from an
118 error here can be painful (see BUGS).
119 Optionally you may also want to do the following:
120 * add 'player' commands for any file formats not supported natively
121 * edit the 'scratch' commands to supply scratch sounds (or delete them if
123 * add or remove 'stopword' entries as necessary (these words won't take
124 part in track name searches from the web interface).
126 See disorder_config(5) for more details.
128 See README.streams for how to set up network play.
130 If adding new 'player' commands, see README.raw for details on setting up
131 "raw format" players. Non-raw players are still supported but not in all
132 configurations and they cannot support pausing and gapless play.
134 5. Make sure the server is started at boot time.
136 On many Linux systems, examples/disorder.init should be more or less
137 suitable; install it in /etc/init.d, adapting it as necessary, and make
138 appropriate links from /etc/rc[0-6].d.
142 On Linux systems with sysv-style init:
144 /etc/init.d/disorder start
146 By default disorderd logs to daemon.*; check your syslog.conf to see where
147 this ends up and look for log messages from disorderd there. If it didn't
148 start up correctly there should be an error message. Correct the problem
151 7. After a minute it should start to play something. Try scratching it (as
156 The track should stop playing, and (if you set any up) a scratch sound play.
158 8. Add any other users you want. These easiest way to do this is (still as
161 disorder authorize USERNAME
163 This will automatically choose a random password and create
164 /etc/disorder/config.USERNAME.
166 Those users should now be able to access the server from the same host as it
167 runs on, either via the disorder command or Disobedience. To run
168 Disobedience from some other host, File->Login allows hostnames, passwords
169 etc to be configured.
171 9. Optionally source completion.bash from /etc/profile or similar, for
174 . /usr/local/share/disorder/completion.bash
176 This provides completion over disorder command and option names.
182 "Thought I was a gonner baby, but I'm bullet proof"
184 These instructions assumes you are using Apache 1.3.x.
186 You need to configure a number of things to make this work:
188 1. The web interface depends on a 'guest' user existing. You can create this
189 with the following command:
193 If you don't want to allow online registration instead use:
195 disorder -- setup-guest --no-online-registration
197 2a. If you want to have a 'jukebox' virtual host, modify the DNS accordingly
198 and use a fragment such as this one:
200 <VirtualHost HOSTNAME>
201 DocumentRoot /home/jukebox/public_html
202 ServerName jukebox.DOMAIN
204 ServerAdmin webmaster@DOMAIN
205 ErrorLog /var/log/apache/jukebox/error.log
206 TransferLog /var/log/apache/jukebox/access.log
207 Alias /static/ /usr/local/share/disorder/static/
210 Don't forget to reload Apache after modifying its configuration.
212 You must tell the web interface how to find its icons and stylesheet:
214 echo label url.static /static/ >> /etc/disorder/options.user
215 echo label links.css /static/disorder.css >> /etc/disorder/options.user
217 2b. If you don't want a virtual host then you must still make sure that
218 DisOrder can find its icons and stylesheet. For example in your web server
221 Alias /disorder/ /usr/local/share/disorder/static/
223 Alternatively you could use a symlink from the right location in your
224 document root, provided your web server is configured to follow them.
226 Also you must tell the web interface how to find them:
228 echo label url.static /disorder/ >> /etc/disorder/options.user
229 echo label links.css /disorder/disorder.css >> /etc/disorder/options.user
231 3. Install disorder.cgi in an appropriate location. Remember to make it
232 executable. For example assuming a virtual host as above (2a):
234 install -m 755 clients/disorder.cgi ~jukebox/public_html/index.cgi
238 install -m 755 clients/disorder.cgi /usr/lib/cgi-bin/disorder
240 4. Try it out. You should be able to perform read-only operations straight
241 away, and after visiting the 'Login' page to authenticate, perform other
242 operations like adding a track to the queue.
244 5. If you run into problems, always look at the appropriate error log; the
245 message you see in your web browser will usually not be sufficient to
246 diagnose the problem all by itself.
248 6. If you have a huge number of top level directories, then you might find
249 that the 'Choose' page is unreasonably large. If so add the following line
250 to /etc/disorder/options.user:
251 label sidebar.choosewhich choosealpha
253 This will make 'Choose' be a link for each letter of the 26-letter Roman
254 alphabet; follow the link and you just get the directories which start with
255 that letter. The "*" link at the end gives you directories which don't
258 You can copy choosealpha.html to /etc/disorder and edit it to change the
259 set of initial choices to anything that can be expressed with regexps. The
260 regexps must be URL-encoded UTF-8 PCRE regexps.
266 "Nothing but another drug, a licence that you buy and sell"
268 DisOrder - select and play digital audio files
269 Copyright (C) 2003-2007 Richard Kettlewell
270 Portions copyright (C) 2007 Ross Younger
271 Portions copyright (C) 2007 Mark Wooding
272 Portions extracted from MPG321, http://mpg321.sourceforge.net/
273 Copyright (C) 2001 Joe Drew
274 Copyright (C) 2000-2001 Robert Leslie
275 Binaries may derive extra copyright owners through linkage (binary distributors
276 are expected to do their own legwork)
278 This program is free software; you can redistribute it and/or modify it under
279 the terms of the GNU General Public License as published by the Free Software
280 Foundation; either version 2 of the License, or (at your option) any later
283 This program is distributed in the hope that it will be useful, but WITHOUT ANY
284 WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
285 PARTICULAR PURPOSE. See the GNU General Public License for more details.
287 You should have received a copy of the GNU General Public License along with
288 this program; if not, write to the Free Software Foundation, Inc., 59 Temple
289 Place, Suite 330, Boston, MA 02111-1307 USA