| 2013-03-15 |
Ian Jackson | tablet-stand: wip, before remove antifoot_overlap
|
commit | commitdiff | tree |
| 2013-03-15 |
Ian Jackson | tablet-stand: wip
|
commit | commitdiff | tree |
| 2012-12-17 |
Ian Jackson | cable-hole-trunking-cover: provide BaseCNone
|
commit | commitdiff | tree |
| 2012-12-17 |
Ian Jackson | cable-hole-trunking-cover: as printed
|
commit | commitdiff | tree |
| 2012-12-17 |
Ian Jackson | pronsolerc: increase bed temp to 90
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: actual sizes for edges
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: actual sizes, apart from...
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: note re checking some parameters
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | slic3r-config: increase bed temps again
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: specify bevelz in terms...
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: separate basebevelt
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: demo
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: thinner walls
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: sides using polygon
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: add to Makefile
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: BaseCBot too
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: nearly done?
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: break back wall out properly...
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: break back wall out, nfc
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: lid done
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: wip lid
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: mirror the sides
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: wip, before mirroring
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: wip, hole
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: wip, base
|
commit | commitdiff | tree |
| 2012-12-16 |
Ian Jackson | cable-hole-trunking-cover: wip, sheared_cube seems...
|
commit | commitdiff | tree |
| 2012-12-03 |
Ian Jackson | slic3r-config: turn perimiters up to 2 - why was it 1 ?
|
commit | commitdiff | tree |
| 2012-12-03 |
Ian Jackson | anke-gps-bracket: NestleCube: visible arches
|
commit | commitdiff | tree |
| 2012-12-03 |
Ian Jackson | anke-gps-bracket: NestleCube: provide nestlearchslope...
|
commit | commitdiff | tree |
| 2012-12-03 |
Ian Jackson | Revert "anke-gps-bracket: NestleCube: experimental...
|
commit | commitdiff | tree |
| 2012-12-03 |
Ian Jackson | anke-gps-bracket: NestleCube: experimental version...
|
commit | commitdiff | tree |
| 2012-12-03 |
Ian Jackson | anke-gps-bracket: NestleCube: adjustments for base
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: fold in some arithmetic...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: undo ill-considered dimensiona...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: echo some dimensions
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCubeCeilTest: new toplevel
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | slic3r-config: new bed temp
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCubeBaseTest: adjustments
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCubeBaseTest: as printed
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: add NestleCubeBaseTest...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: add NestleCubeBaseTest
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: fix duplicate face
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: todos now tracked on paper
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: fix azimuth
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: bevels via triangles...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: bevels via triangles
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: before more points, reformat...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: more bevels, before do...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: add floor, adjust some...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: add a bevel
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube: add some { }, nfc
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: NestleCube top size adjustments
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: fold fudge factors into nestle* sizes
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: ChassisBar: fix adjust of x pos
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: ChassisBar: allow adjust of x pos
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: ChassisBar: fix length
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | slic3r-config: as loaded and then saved by slic3r 0.9.7
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | slic3r-config: reduce temperatures, anke-gps-bracket...
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: ChassisBar
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: HolderSideR
|
commit | commitdiff | tree |
| 2012-12-02 |
Ian Jackson | anke-gps-bracket: HolderSide
|
commit | commitdiff | tree |
| 2012-12-01 |
Ian Jackson | anke-gps-bracket: introduce model_outer[wht]. nfc
|
commit | commitdiff | tree |
| 2012-12-01 |
Ian Jackson | anke-gps-bracket: add NestleCubePin
|
commit | commitdiff | tree |
| 2012-11-30 |
Ian Jackson | anke-gps-bracket: make NestleCube into a toplevel
|
commit | commitdiff | tree |
| 2012-11-30 |
Ian Jackson | anke-gps-bracket: NestleCube: add doveclip
|
commit | commitdiff | tree |
| 2012-11-30 |
Ian Jackson | anke-gps-bracket: NestleCube has a hollow
|
commit | commitdiff | tree |
| 2012-11-30 |
Ian Jackson | anke-gps-bracket: rename InsertionCube to NestleCube
|
commit | commitdiff | tree |
| 2012-11-30 |
Ian Jackson | anke-gps-bracket: wip InsertionCube
|
commit | commitdiff | tree |
| 2012-11-29 |
Ian Jackson | slic3r-config: increase temperatures since first try...
|
commit | commitdiff | tree |
| 2012-11-29 |
Ian Jackson | anke-gps-bracket: move plug slop to one side of plug...
|
commit | commitdiff | tree |
| 2012-11-29 |
Ian Jackson | anke-gps-bracket: remove some size adjustments which...
|
commit | commitdiff | tree |
| 2012-11-29 |
Ian Jackson | anke-gps-bracket: post-prototype size adjustments
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | pronsolerc: retract and prefeed buttons
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: better list of debugging toplevels...
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: bevel the back
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: should fit in one plate
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: actual sizes
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: body lhs and rhs ok
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: gps assembled ok
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: before plug adjust
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: plugslop
|
commit | commitdiff | tree |
| 2012-11-28 |
Ian Jackson | anke-gps-bracket: initial gps body model
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | dungeonquest-cone: One and Four toplevels
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | dungeonquest-cone: reduce temperatures
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | Merge branch 'master' of chiark:/u/ianmdlvl/reprap...
|
commit | commitdiff | tree |
| 2012-11-25 |
Ian Jackson | dungeonquest-cone: initial
|
commit | commitdiff | tree |
| 2012-11-24 |
Ian Jackson | filamentspool: FilamentCup: two prongs
|
commit | commitdiff | tree |
| 2012-11-24 |
Ian Jackson | slic3r-config, etc.: increase temperatures, restore...
|
commit | commitdiff | tree |
| 2012-11-24 |
Ian Jackson | INSTRUCTIONS: slic3r rune
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: RearCableProtector: add 10mm...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: ChannelBracket: initial
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: ChannelBracket: initial
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: ChannelBracket: wip
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: RearCableProtector: diagonal...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: initial RearCableProtector
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: try again with no pad (less...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: try again with no pad
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: no pads since we need no lid...
|
commit | commitdiff | tree |
| 2012-11-17 |
Ian Jackson | xeno-drivebay-bracket: remove obsolete setting
|
commit | commitdiff | tree |
| 2012-11-12 |
Ian Jackson | slic3r-config add G1 Z10
|
commit | commitdiff | tree |
| next |
~ianmdlvl / reprap-play.git / search