| 2015-12-25 |
Ian Jackson | pattress-boxes-3-cover: LidSide, introduce lid_inner_w...
|
commit | commitdiff | tree |
| 2015-12-25 |
Ian Jackson | pattress-boxes-3-cover: LidSide, wip
|
commit | commitdiff | tree |
| 2015-12-25 |
Ian Jackson | pattress-boxes-3-cover: LidSide, wip
|
commit | commitdiff | tree |
| 2015-12-25 |
Ian Jackson | pattress-boxes-3-cover: LidSideProfile, wip
|
commit | commitdiff | tree |
| 2015-12-21 |
Ian Jackson | test-cup: try this
|
commit | commitdiff | tree |
| 2015-12-18 |
Ian Jackson | slic3r-config, pronsolerc: Adjust temperatures for...
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: Introduce channelslop
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: Add Demo() call to examples at end
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: light duty tuning: no changes for other...
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: Switch to light duty
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: Provide a rather shonky demo
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: Fix a bug in dove version introduced...
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: Prep a bit more for lightduty (still...
|
commit | commitdiff | tree |
| 2015-12-17 |
Ian Jackson | filamentspool: Prep for 2.85dia lightduty (nfc, even...
|
commit | commitdiff | tree |
| 2015-12-16 |
Ian Jackson | pawn: set dx=0 to avoid rotate_extrude problem
|
commit | commitdiff | tree |
| 2015-12-16 |
Ian Jackson | pawn: break d into d and dx (nfc)
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: Securing clip slightly smaller wings
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: 3mm: Actually propshift by only 6 to...
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: 3mm: Reduce effective rad
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: 3mm: Move cup prop inwards
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: 3mm: more Hub axle len
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: 3mm: Make Hub axle len depend exactly...
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: 3mm: Hub bigger axle hole
|
commit | commitdiff | tree |
| 2015-12-15 |
Ian Jackson | filamentspool: 3mm: Hub less chunky
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Bigger bolt hole - apropos test
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | holetest: a test
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Prep for print
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Adjust hubaxlelen
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | Revert "filamentspool: 3mm: Increase ArmEnd length"
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Increase ArmEnd length
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Increase cupheight a bit again
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Introduce armend_length (nfc)
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Adjust cup size
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Reduce 3mm size: Minimum arm overlap
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Reduce 3mm size: Prep for reduce armbase...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Reduce 3mm size: reduce arm overlap
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Reduce prongthick again, now we...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Cup: add prongrib on side
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Cup: Fix extra clip posns when prongthick...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Cup: add prongrib on top
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Reduce prongwidth again, now we...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Cup whitespace change (nfc)
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Cup strengthening bar at back
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Working on Cup
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: FilamentCup: introduce baselen (nfc)
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Remove now-redundant and inoperative...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Slight reduce radii
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Add nondove_armhole_slop_x
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Four arms
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Prep for varying arm number (nfc)
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Hub non-dove version
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: Hub non-dove version prep (nfc...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Reorg so axle hole is subtracted from...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Reorg so axle hole is subtracted from...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Reorg so axle hole is subtracted from...
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: 3mm: bigger hub etc.
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Move selsz and usedove up (nfc)
|
commit | commitdiff | tree |
| 2015-12-14 |
Ian Jackson | filamentspool: Prep for work on hub
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Prep for some test prints
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: ArmEnd nondove version wip
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Prep ArmEnd for nondove (nfc if dove)
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Prep usedove() nfc
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: CupSecuringClip thicker
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: CupSecuringClip four handles
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Work on CupSecuringClip
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: 3mm: stalklength even bigger
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: 3mm: stalklength bigger
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: 3mm: thicker prongs on cup
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: 3mm: bigger cup for 3mm x 100m coils
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: 3mm: Set for fatter filament
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: 3mm: introduce selsz (nfc)
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: More clips
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Adjust prop for square cup (this time...
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Adjust prop for square cup
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Square cup
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Before work on TAZ-5 version: another...
|
commit | commitdiff | tree |
| 2015-12-13 |
Ian Jackson | filamentspool: Before work on TAZ-5 version
|
commit | commitdiff | tree |
| 2015-11-04 |
Ian Jackson | warptest3: no, try this
|
commit | commitdiff | tree |
| 2015-11-04 |
Ian Jackson | warptest3: try this
|
commit | commitdiff | tree |
| 2015-11-02 |
Ian Jackson | led-panel-ceiling-bracket: does not need to be so strong
|
commit | commitdiff | tree |
| 2015-11-02 |
Ian Jackson | led-panel-ceiling-bracket: invert for printing
|
commit | commitdiff | tree |
| 2015-11-02 |
Ian Jackson | led-panel-ceiling-bracket: non-countersunk screws,...
|
commit | commitdiff | tree |
| 2015-11-01 |
Ian Jackson | led-panel-ceiling-bracket: show remaining wall thickness...
|
commit | commitdiff | tree |
| 2015-11-01 |
Ian Jackson | led-panel-ceiling-bracket: Fix plasplug size
|
commit | commitdiff | tree |
| 2015-11-01 |
Ian Jackson | led-panel-ceiling-bracket: fix "bolt hole depth change...
|
commit | commitdiff | tree |
| 2015-11-01 |
Ian Jackson | led-panel-ceiling-bracket: needs to engage twice as...
|
commit | commitdiff | tree |
| 2015-10-30 |
Ian Jackson | led-panel-ceiling-bracket: bolt hole depth change for...
|
commit | commitdiff | tree |
| 2015-10-30 |
Ian Jackson | led-panel-ceiling-bracket: swap order to make % of...
|
commit | commitdiff | tree |
| 2015-10-29 |
Ian Jackson | led-panel-ceiling-bracket: stronger
|
commit | commitdiff | tree |
| 2015-10-29 |
Ian Jackson | led-panel-ceiling-bracket: ready for test?
|
commit | commitdiff | tree |
| 2015-10-29 |
Ian Jackson | led-panel-ceiling-bracket: wip
|
commit | commitdiff | tree |
| 2015-10-29 |
Ian Jackson | led-panel-ceiling-bracket: wip
|
commit | commitdiff | tree |
| 2015-10-25 |
Ian Jackson | warptest: shorter and taller
|
commit | commitdiff | tree |
| 2015-10-25 |
Ian Jackson | warptest: longer and thinner and taller
|
commit | commitdiff | tree |
| 2015-09-19 |
Ian Jackson | Makefile: fix warning
|
commit | commitdiff | tree |
| 2015-09-05 |
Ian Jackson | fire-blanket-wall-mushroom: suggestions after print...
|
commit | commitdiff | tree |
| 2015-09-05 |
Ian Jackson | fire-blanket-wall-mushroom: adjust fudge
|
commit | commitdiff | tree |
| 2015-09-05 |
Ian Jackson | fire-blanket-wall-mushroom: first layer finer
|
commit | commitdiff | tree |
| 2015-09-05 |
Ian Jackson | fire-blanket-wall-mushroom: fix orentation etc.
|
commit | commitdiff | tree |
| 2015-09-05 |
Ian Jackson | pronsolerc: Update build area (new pronterface)
|
commit | commitdiff | tree |
| next |
~ianmdlvl / reprap-play.git / search