settings for today's prints so far

diff --git a/pronsolerc b/pronsolerc
index b65ca73bf5dcd92ed12d6ce8e14ab1b108023a47..79a6abf27589f06cf67e9fac329550e868afcb4f 100644 (file)
--- a/pronsolerc
+++ b/pronsolerc
@@ -11,7 +11,7 @@ button 9 "BR" G1 X15 Y15 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000

-set last_bed_temperature 60.0
+set last_bed_temperature 71.0

 set baudrate 115200
 set last_file_path /home/ian/things/Reprap/play
 set xy_feedrate 3000
 set baudrate 115200
 set last_file_path /home/ian/things/Reprap/play
 set xy_feedrate 3000

diff --git a/slic3r-config.ini b/slic3r-config.ini
index f77a8f13dd7af8f072bc6a920230c1b7f4fe568b..5f13cd3b8b04ffff47f22b286f18b96781abdec8 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,6 +1,6 @@
 acceleration = 0
 bed_size = 140,140
 acceleration = 0
 bed_size = 140,140

-bed_temperature = 85
+bed_temperature = 70

 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60


@@ -24,11 +24,11 @@ filament_diameter = 1.8
 fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear
 fill_angle = 45
 fill_density = 0.4
 fill_pattern = rectilinear

-first_layer_bed_temperature = 85
+first_layer_bed_temperature = 70

 first_layer_extrusion_width = 0
 first_layer_height = 100%
 first_layer_speed = 30%
 first_layer_extrusion_width = 0
 first_layer_height = 100%
 first_layer_speed = 30%

-first_layer_temperature = 230
+first_layer_temperature = 190

 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0


@@ -54,14 +54,14 @@ print_center = 70,70
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5
 randomize_start = 1
 retract_before_travel = 2
 retract_length = 4.5

-retract_lift = 0
+retract_lift = 0.1

 retract_restart_extra = 0.1
 retract_speed = 30
 rotate = 0
 scale = 1
 retract_restart_extra = 0.1
 retract_speed = 30
 rotate = 0
 scale = 1

-skirt_distance = 6
+skirt_distance = 12

 skirt_height = 1
 skirt_height = 1

-skirts = 1
+skirts = 2

 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 slowdown_below_layer_time = 15
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear


@@ -74,9 +74,9 @@ support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
 support_material_tool = 0
 support_material_spacing = 2.5
 support_material_threshold = 45
 support_material_tool = 0

-temperature = 230
+temperature = 190

 threads = 2
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0
 threads = 2
 top_solid_infill_speed = 50
 travel_speed = 130
 use_relative_e_distances = 0

-z_offset = -0.5
+z_offset = 0.0