slic3r-config, etc.: increase temperatures, restore extrusion multiplier, suitable...

diff --git a/pronsolerc b/pronsolerc
index 9182137bd9db3b9b37041b112fe5979e4d9fab4a..ab53a11716c87d1a077dcef3f5cf39a8f5ad8d02 100644 (file)
--- a/pronsolerc
+++ b/pronsolerc
@@ -11,7 +11,7 @@ button 9 "BR" G1 X15 Y15 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000

-set last_bed_temperature 80.0
+set last_bed_temperature 90.0

 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000
 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 794667c164cacab7514a512df38344836b649421..03cb4bdd2189cf98a3681dde23df5733414fa442 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012
+# generated by Slic3r 0.9.1 on Sat Nov 24 21:15:49 2012

 acceleration = 0
 bed_size = 140,140
 acceleration = 0
 bed_size = 140,140

-bed_temperature = 90
+bed_temperature = 100

 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60


@@ -19,7 +19,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E

-extrusion_multiplier = 0.9
+extrusion_multiplier = 1.0

 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60


@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear

-first_layer_bed_temperature = 80
+first_layer_bed_temperature = 90

 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%