filamentspool: FilamentGuideClipSpacerClip ready?

diff --git a/filamentspool.scad b/filamentspool.scad
index e44b550011710e9d1dee12e8d4828867bd934bae..179505d63aabe2bc5478aca665f3071903209e06 100644 (file)
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -676,39 +676,63 @@ module StorArmHoleTest(){ ////toplevel
 }
 
 
 }
 
 

-//----- filament guide clip spacer clip -----
+//----- filament guide spacer -----

 
 

-guideclip_armdia = 15.0 + 0.5;
-guideclip_armwidth = 10.2 + 0.5;
-guideclip_armspacelen = 15.3 - 0.25;
+guide_armdia = 15.0 + 0.75;
+guide_armwidth = 10.2 + 0.75;

 
 

-guideclip_prongprotrude = 4;
-guideclip_thick = 1.6;
+guidefilclip_outerdia = 22.8;

 
 

-module FilamentGuideClipArmTemplate(extra=0){
+guidespacer_prongprotrude = 4;
+guidespacer_thick = 1.6;
+guidespacer_len = 15.3 - 0.25;
+
+// calculated
+
+guidespacer_wingheight = (guidefilclip_outerdia - guide_armdia)/2;
+
+module FilamentGuideArmTemplate(extra=0){

   intersection(){
   intersection(){

-    circle(r= (guideclip_armdia/2) + extra);
-    square(center=true, [guideclip_armwidth+extra*2,
-                        guideclip_armdia + extra*2 + 10]);
+    circle(r= (guide_armdia/2) + extra);
+    square(center=true, [guide_armwidth+extra*2,
+                        guide_armdia + extra*2 + 10]);

   }
 }
 
   }
 }
 

-module FilamentGuideClipSpacerClipInnerTemplate(){
-  FilamentGuideClipArmTemplate();
-  translate([0, -guideclip_armdia/2])
-    square(center=true, [guideclip_armwidth - guideclip_prongprotrude,
-                        guideclip_armdia]);
+module FilamentGuideSpacerInnerTemplate(){
+  FilamentGuideArmTemplate();
+  translate([0, -guide_armdia/2])
+    square(center=true, [guide_armwidth - guidespacer_prongprotrude,
+                        guide_armdia]);

 }
 
 }
 

-module FilamentGuideClipSpacerClip(){ ////toplevel
+module FilamentGuideSpacer(){ ////toplevel

   difference(){
     union(){
   difference(){
     union(){

-      linear_extrude(height= guideclip_armspacelen)
-       FilamentGuideClipArmTemplate(extra= guideclip_thick);
+      linear_extrude(height= guidespacer_len)
+       FilamentGuideArmTemplate(extra= guidespacer_thick);
+      for (angle=[26, 60]) {
+       for (m=[0,1]) {
+         mirror([m,0,0]) {
+           rotate([0,0,angle]) {
+             hull(){
+               for (t=[[0, guidespacer_wingheight],
+                       [guidespacer_len, -guidespacer_wingheight]])
+                 translate([0,0, t[0] + 0.5])
+                   cube([guidespacer_thick,
+                         guide_armdia + guidespacer_thick*2
+                         + t[1]*2,
+                     1],
+                        center=true);
+             }
+           }
+         }
+       }
+      }

     }
     translate([0,0,-1])
     }
     translate([0,0,-1])

-      linear_extrude(height= guideclip_armspacelen+2)
-      FilamentGuideClipSpacerClipInnerTemplate();
+      linear_extrude(height= guidespacer_len+5)
+      FilamentGuideSpacerInnerTemplate();

   }
 }
 
   }
 }