slic3r-config, pronsolerc: Adjust temperatures for new polyethemiride reprap base

diff --git a/pronsolerc b/pronsolerc
index 34e6c69840d75e5b66d669e877ac8080706e2cb4..30732865c095d5c6216db501dfca2b64c694e205 100644 (file)
--- a/pronsolerc
+++ b/pronsolerc
@@ -1,5 +1,5 @@
 set port /dev/ttyUSB0
 set port /dev/ttyUSB0

-set last_temperature 215.0
+set last_temperature 205.0

 
 macro button_retract
       M83
 
 macro button_retract
       M83


@@ -21,7 +21,7 @@ button 9 "BR" G1 X15 Y15 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000

-set last_bed_temperature 100.0
+set last_bed_temperature 60.0

 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000
 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 971c5920e78710166c3a68eb50f4d5af7f2f2320..c496b9171221ca15c619cb443e7c7a2ac7db9df8 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.7 on Tue May 27 22:23:38 2014
+# generated by Slic3r 0.9.7 on Fri Dec 18 00:34:03 2015

 acceleration = 0
 bed_size = 140,140
 acceleration = 0
 bed_size = 140,140

-bed_temperature = 100
+bed_temperature = 60

 bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1


@@ -28,11 +28,11 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear

-first_layer_bed_temperature = 100
+first_layer_bed_temperature = 60

 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%

-first_layer_temperature = 215
+first_layer_temperature = 205

 g0 = 0
 gap_fill_speed = 20
 gcode_arcs = 0
 g0 = 0
 gap_fill_speed = 20
 gcode_arcs = 0