increase initial bed temp to 100 - helps with warping, a bit

diff --git a/pronsolerc b/pronsolerc
index 733d068510b814177336700a29eef490736607ea..db49f8e2704cc1bb863e9c7c81512b8bf4648bb8 100644 (file)
--- a/pronsolerc
+++ b/pronsolerc
@@ -21,7 +21,7 @@ button 9 "BR" G1 X15 Y15 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000
 button 10 "FL" G1 X135 Y135 F12000
 button 11 "UP" G1 Z6 F200
 button 12 "FR" G1 X15 Y135 F12000

-set last_bed_temperature 90.0
+set last_bed_temperature 100.0

 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000
 set baudrate 115200
 set last_file_path /home/reprap/play
 set xy_feedrate 3000

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 3b920879130ec8c9e62b2cb66ec94eec8eb89c9c..b98386cd2645a6d07f72f46c69f912113baf282f 100644 (file)
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.7 on Sun Dec 16 20:42:19 2012
+# generated by Slic3r 0.9.7 on Mon Mar 10 17:22:59 2014

 acceleration = 0
 bed_size = 140,140
 bed_temperature = 100
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 100


@@ -28,7 +28,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear

-first_layer_bed_temperature = 90
+first_layer_bed_temperature = 100

 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%