chiark / gitweb /
size-tests: as just printed, extrusion rate tests
authorIan Jackson <ijackson@chiark.greenend.org.uk>
Sun, 12 Aug 2012 22:45:28 +0000 (23:45 +0100)
committerIan Jackson <ijackson@chiark.greenend.org.uk>
Sun, 12 Aug 2012 22:45:28 +0000 (23:45 +0100)
size-tests.m-g

index 48a3a17..fbb666b 100644 (file)
@@ -135,12 +135,60 @@ M82 ; use absolute distances for extrusion
 
 !}
 
+!feedrate_tests(){
+
+!orgx=20
+!extruderate=0.045
+!feedrate_test1()
+
+!orgx=30
+!extruderate=0.060
+!feedrate_test1()
+
+!orgx=40
+!extruderate=0.080
+!feedrate_test1()
+
+!orgx=50
+!extruderate=0.100
+!feedrate_test1()
+
+!orgx=60
+!extruderate=0.125
+!feedrate_test1()
+
+!orgx=70
+!extruderate=0.150
+!feedrate_test1()
+
+!orgx=80
+!extruderate=0.200
+!feedrate_test1()
+
+!}
+
+!feedrate_test1(){
+
+!orgy=20
+!outer_longrect()
+
+!orgy=50
+!inner_longrect()
+!outer_longrect()
+
+!orgy=80
+!outer_longrect()
+!inner_longrect()
+
+!}
+
 !layer(){
 
 ;--------------------
 
-!squares_tests()
-!org_oblong()
+;!squares_tests()
+;!org_oblong()
+!feedrate_tests()
 
 !}
 
@@ -152,6 +200,9 @@ M140 S60 ; set bed temperature
 !zprint=0.7
 !layer()
 
+!zprint=1.1
+!layer()
+
 M83 ; extruder relative
 G1 F1000 ;1000mm/min extrusion
 G1 E-10; retract