quacks-ingredients: gcode manipulation

Nail down the cura profile.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

diff --git a/quacks-ingredients-make-copy-gcodes b/quacks-ingredients-make-copy-gcodes
index b9c6c348f4d0a2f9f4695b57d4772200d43da48e..4d9c8ea0d9e64bf401ae751d3b95aab559210e47 100755 (executable)
--- a/quacks-ingredients-make-copy-gcodes
+++ b/quacks-ingredients-make-copy-gcodes
@@ -23,7 +23,7 @@ gh () {
 
 for l in 1 2 3 4 5; do
        gh
-       cura -s $lhs$l,$f.auto.stl -o $g
+       cura -i quacks.ini -s $lhs$l,$f.auto.stl -o $g
        case $l in
        1|2|3|4)
                perl -i~ -pe 's/^/;/ if m/^M140 S0\b.*\n/' $g

diff --git a/quacks.ini b/quacks.ini
new file mode 100644 (file)
index 0000000..8a4f7cc
--- /dev/null
+++ b/quacks.ini
@@ -0,0 +1,266 @@
+[profile]
+layer_height = 0.14
+wall_thickness = 1
+retraction_enable = True
+solid_layer_thickness = 1
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.5
+print_speed = 50
+print_temperature = 0
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100.0
+retraction_speed = 10
+retraction_amount = 1.5
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.425
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 15
+infill_speed = 40
+solidarea_speed = 30
+inset0_speed = 30
+insetx_speed = 35
+fill_angle = 45
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 75
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 60
+support_fill_rate = 30
+support_xy_distance = 1.5
+support_z_distance = 0.1
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = Standard
+simplemodematerial = PLA
+simplemodematerialtype = Beginner
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+       ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+       ;Print time: {print_time}
+       ;Filament used: {filament_amount}m {filament_weight}g
+       ;Filament cost: {filament_cost}
+       ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
+       ;M109 R{print_temperature} ;Uncomment to add your own temperature line
+       G21                     ;metric values
+       G90                     ;absolute positioning
+       M82                     ;set extruder to absolute mode
+       M107                    ;start with the fan off
+       G28 X0 Y0               ;move X/Y to min endstops
+       G28 Z0                  ;move Z to min endstops
+       G1 Z15.0 F{travel_speed};move the platform down 15mm
+       G92 E0                  ; zero the extruded length
+       G1 F200 E0              ; extrude 3mm of feed stock
+       G92 E0                  ; zero the extruded length again
+       G1 F{travel_speed}      ; set travel speed
+       M203 X192 Y208 Z3       ; speed limits
+       M117 Printing...        ; send message to LCD
+end.gcode = M400
+       M104 S0                        ; hotend off
+       M140 S0                        ; heated bed heater off (if you have it)
+       M107                           ; fans off
+       G91                            ; relative positioning
+       G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+       G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+       G90                            ; absolute positioning
+       G1 X0 Y250                     ; move to cooling position
+       M84                            ; steppers off
+       G90                            ; absolute positioning
+       M117 TAZ Ready.
+       ;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+       ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+       ;Print time: {print_time}
+       ;Filament used: {filament_amount}m {filament_weight}g
+       ;Filament cost: {filament_cost}
+       ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
+       ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+       ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+       ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+       G21        ;metric values
+       G90        ;absolute positioning
+       M107       ;start with the fan off
+       G28 X0 Y0  ;move X/Y to min endstops
+       G28 Z0     ;move Z to min endstops
+       G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+       T1                      ;Switch to the 2nd extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F200 E-{retraction_dual_amount}
+       T0                      ;Switch to the first extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F{travel_speed}
+       ;Put printing message on LCD screen
+       M117 Printing...
+end2.gcode = ;End GCode
+       M104 T0 S0                     ;extruder heater off
+       M104 T1 S0                     ;extruder heater off
+       M140 S0                     ;heated bed heater off (if you have it)
+       G91                                    ;relative positioning
+       G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+       G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+       G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+       M84                         ;steppers off
+       G90                         ;absolute positioning
+       ;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+       ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+       ;Print time: {print_time}
+       ;Filament used: {filament_amount}m {filament_weight}g
+       ;Filament cost: {filament_cost}
+       ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
+       ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+       ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+       ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+       G21        ;metric values
+       G90        ;absolute positioning
+       M107       ;start with the fan off
+       G28 X0 Y0  ;move X/Y to min endstops
+       G28 Z0     ;move Z to min endstops
+       G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+       T2                      ;Switch to the 2nd extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F200 E-{retraction_dual_amount}
+       T1                      ;Switch to the 2nd extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F200 E-{retraction_dual_amount}
+       T0                      ;Switch to the first extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F{travel_speed}
+       ;Put printing message on LCD screen
+       M117 Printing...
+end3.gcode = ;End GCode
+       M104 T0 S0                     ;extruder heater off
+       M104 T1 S0                     ;extruder heater off
+       M104 T2 S0                     ;extruder heater off
+       M140 S0                     ;heated bed heater off (if you have it)
+       G91                                    ;relative positioning
+       G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+       G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+       G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+       M84                         ;steppers off
+       G90                         ;absolute positioning
+       ;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+       ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+       ;Print time: {print_time}
+       ;Filament used: {filament_amount}m {filament_weight}g
+       ;Filament cost: {filament_cost}
+       ;M190 R{print_bed_temperature} ;Uncomment to add your own bed temperature line
+       ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+       ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+       ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+       ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+       G21        ;metric values
+       G90        ;absolute positioning
+       M107       ;start with the fan off
+       G28 X0 Y0  ;move X/Y to min endstops
+       G28 Z0     ;move Z to min endstops
+       G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+       T3                      ;Switch to the 4th extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F200 E-{retraction_dual_amount}
+       T2                      ;Switch to the 3th extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F200 E-{retraction_dual_amount}
+       T1                      ;Switch to the 2nd extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F200 E-{retraction_dual_amount}
+       T0                      ;Switch to the first extruder
+       G92 E0                  ;zero the extruded length
+       G1 F200 E10             ;extrude 10mm of feed stock
+       G92 E0                  ;zero the extruded length again
+       G1 F{travel_speed}
+       ;Put printing message on LCD screen
+       M117 Printing...
+end4.gcode = ;End GCode
+       M104 T0 S0                     ;extruder heater off
+       M104 T1 S0                     ;extruder heater off
+       M104 T2 S0                     ;extruder heater off
+       M104 T3 S0                     ;extruder heater off
+       M140 S0                     ;heated bed heater off (if you have it)
+       G91                                    ;relative positioning
+       G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+       G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+       G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+       M84                         ;steppers off
+       G90                         ;absolute positioning
+       ;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+       ;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+       ;This code is added after the T(n)
+