maglite-holder: wip, before hollow fig

diff --git a/.gitignore b/.gitignore
index 71fbe9ecde796f497747f4f6d197ece30020b273..e4d9694bd37d9b32616d6d6e44c8e9f69a50458f 100644 (file)
--- a/.gitignore
+++ b/.gitignore
@@ -23,3 +23,5 @@ filamentspool-number-n*.dxf
 filamentspool-number-n*.eps
 sealing-box.scad
 sewing-table.scad
+maglite-holder-torch-curve.dxf
+maglite-holder-torch-curve.eps

diff --git a/Makefile b/Makefile
index c88f8335814886b3b0ecc06a626de8cf44e4f75b..70d20e09a3a71db7e2262c10a4a3e7a8511f657d 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -115,6 +115,11 @@ pandemic-counter-l%.eps: pandemic-counter-letters.fig
                fig2dev -D +$(notdir $*) -L eps <$< >$@.tmp
                @mv -f $@.tmp $@
 
+.PRECIOUS: maglite-holder-torch-curve.eps
+maglite-holder-torch-curve.eps: maglite-holder-torch.fig
+               fig2dev -D +1:70 -L eps <$< >$@.tmp
+               @mv -f $@.tmp $@
+
 PANDEMICQUARANTINES_NUMBERS=1 2
 PANDEMICQUARANTINES_DXFS=$(foreach l,$(PANDEMICQUARANTINES_NUMBERS), \
        pandemic-quarantine-l$l.dxf)

diff --git a/maglite-holder-torch.fig b/maglite-holder-torch.fig
index be3d1d7aa1aa9a328ce24b0d1a7ed24027aa82f5..0f127f30e4a09fff65e06539e292aab2fafe6e28 100644 (file)
--- a/maglite-holder-torch.fig
+++ b/maglite-holder-torch.fig
@@ -7,7 +7,7 @@ A4
 Single
 -2
 1200 2
-5 1 0 1 1 1 50 -1 -1 0.000 0 0 0 0 569.697 -142.238 -1345 -180 -1251 -736 -996 -1245
+5 1 0 1 4 4 50 -1 20 0.000 0 0 0 0 569.697 -142.238 -1345 -180 -1251 -736 -996 -1245
 2 5 0 1 0 -1 100 -1 -1 0.000 0 0 -1 0 0 5
        0 maglite-holder-photo.jpg
         -1710 -2475 1753 -2475 1753 2472 -1710 2472 -1710 -2475

diff --git a/maglite-holder.scad b/maglite-holder.scad
new file mode 100644 (file)
index 0000000..c38e3bd
--- /dev/null
+++ b/maglite-holder.scad
@@ -0,0 +1,8 @@
+// -*- C -*-
+
+module Torch(){
+  import(file="screw-recess-test-number-s3.dxf", convexity=10);
+//  import(file="maglite-holder-torch-curve.dxf", convexity=10);
+}
+
+linear_extrude(100) Torch();