// -*- C -*-
-pxp6012_rad = 22.5 / 2 + 0.5;
+include <commitid.scad>
+include <utils.scad>
+include <sealing-box.scad>
+
+pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
pxp6012_rad_outer = 32.0 / 2 - 0.5;
s1930_y = 30.2 + 0.2;
s1930_x_outer = 27.6 + 0.2;
s1930_recess = 3;
+s1930_around = 3;
+s1930_behind = 3;
+
+wallthick = 2.5;
+
+// origin is at centre on outer face wall
+// outside is towards positive x
+// mounting is vertical
+module S1930_Positive(){
+ d = s1930_recess + s1930_behind;
+ translate([-d/2, 0,0])
+ cube([d,
+ s1930_x_outer + s1930_around,
+ s1930_y_outer + s1930_around], center=true);
+}
+module S1930_Negative(){
+ cube([60, s1930_x, s1930_y],
+ center=true);
+ translate([1, 0,0])
+ cube([s1930_recess*2+2, s1930_x_outer, s1930_y_outer],
+ center=true);
+}
-wallthick = 3.0;
+module TestWall(){ ////toplevel
+ sw_ctr = [25, wallthick, 25];
-module TestWall(){
rotate([0,0,-90]){
difference(){
union(){
translate([30, -1, 20])
rotate([-90,0,0])
cylinder(r = pxp6012_rad, h=10, $fn=60);
+
+ rotate([90,0,0])
+ Commitid_BestCount([15,40]);
}
}
+
+ difference(){
+ union(){
+ cube([50, wallthick, 50]);
+ translate(sw_ctr)
+ rotate([0,0,90])
+ S1930_Positive();
+ }
+
+ translate(sw_ctr) {
+ rotate([0,0,90])
+ S1930_Negative();
+ }
+ }
+}
+
+ts_totx = 30;
+ts_toty = 25;
+ts_totz_inner = 8;
+
+$sealingbox_wallth = wallthick;
+$sealingbox_floorth = wallthick;
+$sealingbox_ceilth = wallthick;
+
+module TestSealBox(){ ////toplevel
+ $sealingbox_xbox = ts_totx;
+ $sealingbox_ybox = ts_toty;
+ $sealingbox_zbox = ts_totz_inner;
+
+ SealingBox_RectBox();
+ ts_cidoff = ($sealingbox_cnrrad * (1-.7) + wallthick * .8) * [1,1];
+ translate(ts_cidoff)
+ Commitid_BestCount([ts_totx,ts_toty] - 2*ts_cidoff);
+}
+
+module TestSealLid(){ ////toplevel
+ $sealingbox_xbox = ts_totx;
+ $sealingbox_ybox = ts_toty;
+ $sealingbox_zbox = ts_totz_inner;
+
+ difference(){
+ SealingBox_RectLid();
+
+ translate([ts_totx * .75, ts_toty/2, 0])
+ cylinder(h=100, r=5);
+
+ translate([-wallthick + $sealingbox_cnrrad*.5,
+ $sealingbox_cnrrad*.5 - wallthick,
+ ts_totz_inner + $sealingbox_ceilth])
+ Commitid_BestCount([ts_totx * .75 - 2.5 - ($sealingbox_cnrrad*.5),
+ ts_toty - ($sealingbox_cnrrad*.5 - wallthick)*2]);
+ }
+}
+
+module TestSealLidPrint(){ ////toplevel
+ rotate([180,0,0]) TestSealLid();
}
-TestWall();
+module ProfileDemos(){ ////toplevel
+ $sealingbox_xbox = ts_totx;
+ $sealingbox_ybox = ts_toty;
+ $sealingbox_zbox = ts_totz_inner;
+
+ SealingBox_WallProfile();
+ color("blue") SealingBox_FloorProfile();
+ SealingBox_LidProfile();
+ color("blue") SealingBox_CeilProfile();
+ color("red") translate([-5,0]) square([1,ts_totz_inner]);
+}
+
+//TestWall();
+//ProfileDemos();
+//TestSealBox();
+//TestSealLid();
+//FArcSegment_mask(350);