4 include <commitid.scad>
10 ply_hole_dia_real = 12;
26 interlock_fine = 0.66;
28 interlock_fine_slope = 1.0;
29 interlock_fine_lenslop = 1.0;
35 machine_rear_to_front = 84 + 0.25 - 1.4;
37 cutout_l_end_y_front_slop = 0.5;
38 cutout_l_end_y_rear_slop = 0.5;
41 cutout_l_end_y = machine_rear_to_front;
42 cutout_l_end_new_x_slop = 1.4 - 1.95;
43 cutout_l_end_y_total = cutout_l_end_y
44 + cutout_l_end_y_front_slop + cutout_l_end_y_rear_slop;
46 tile02_tr = [-250, 0];
49 cutout_tile01_y = 170 - 147 + cutout_l_end_y_front_slop;
50 cutout_tile11_y = cutout_l_end_y_total - cutout_tile01_y;
52 // front and rear curves
54 rearedge_len = 170 + 0.70;
57 rearcurve_strt_len = 52;
59 rearcurve_z_slop = -0.50;
61 rearcurve_avoid_y = 35;
63 rearcurve_double_inrad = 26.10 + 8.04;
69 frontcurve_side_skew = 3.5 / 72;
70 frontcurve_avoid_y = 70;
71 frontcurve_z_slop = 0.75;
73 frontcurve_strt_len = 50;
74 frontcurve_dualcurve_angle = 30;
76 teststrapslots_at = [ [ 110, 70 ], [ 110, -35 ],
78 [ 190, -80 ], // do not change index of this one
79 [ 0, 70 ], [ 0, -35 ],
83 teststrap_peg = [7.5, 3.5];
85 ply_edge_hole_dist_real = 14;
92 ply_edge_hole_dist = ply_edge_min + ply_hole_dia/2;
94 echo(str("HOLES IN PLY ctr dist from PLY edge = ", ply_edge_hole_dist));
96 hole_slop = (ply_hole_dia - post_dia)/2;
97 tile_hard_edge_hole_dist = ply_edge_hole_dist + hole_slop;
99 echo(str("HOLES IN PLY ctr dist from TILE HARD edge = ",
100 tile_hard_edge_hole_dist));
102 echo(str("HOLES IN PLY ctr dist from TILE ROUND edge = ",
103 tile_hard_edge_hole_dist + round_edge_rad));
105 thehd = [ tile_hard_edge_hole_dist, tile_hard_edge_hole_dist ];
107 thehd_tl = [ -thehd_tr[0], thehd_tr[1] ];
108 thehd_bl = -thehd_tr;
109 thehd_br = -thehd_tl;
111 tablet_z_slop = 1.00;
113 interlock_rad = interlock_dia/2;
114 interlock_negative_rad = interlock_rad + 0.125;
116 interlock_sq_adj = 0.2; // arbitrary
118 m4_define(`POST_TCROSSSZ',
119 `2*( tile_hard_edge_hole_dist - test_edge + 1 )')
125 cylinder(r= post_dia/2, h= tile_th + ply_th - post_shorter);
126 translate([0,0, tile_th]) {
127 cylinder(r= screw_big_dia/2, h= screw_big_len);
128 cylinder(r= screw_dia/2, h= ply_th, $fn=20);
133 translate([0,0, tile_th/2]) {
134 cube([post_dia, POST_TCROSSSZ, tile_th], center=true);
135 cube([POST_TCROSSSZ, post_dia, tile_th], center=true);
139 translate([0,0, tile_th/2]) {
140 cube([POST_TCROSSSZ, POST_TCROSSSZ, tile_th], center=true);
149 cylinder(r= post_dia/2 + jig_post_hole_slop, h=10);
150 translate([0,0, -jig_min_th])
151 cylinder(r= ply_hole_dia_real/2, h = 5);
152 for (rot=[0:90:270]) rotate(rot) {
153 translate([ ply_edge_hole_dist_real, 0, 0 ])
154 cube([ jig_pencil_rad*2, jig_pencil_slotlen, 20 ], center=true);
159 module Posts(posts) {
161 translate(concat(p, [0]))
165 module PostHoles(posts) {
167 translate(concat(p, [0]))
172 module TileBase(botleft, topright){
173 size = topright - botleft;
174 botleft_post = botleft + thehd_tr;
175 topright_post = topright + thehd_bl;
178 translate(concat(botleft, [0]))
179 cube(concat(size, [tile_th]));
180 if (!(TEST || JIG)) {
181 cidsz = topright_post-botleft_post
182 + [-post_dia,-post_dia]
184 cidszr = [ min(cidsz[0],50), min(cidsz[1],50) ];
185 echo("CID",cidsz,cidszr);
186 translate( concat(botleft_post, [ -tile_th ])
187 + 0.5 * [ post_dia, post_dia, 0 ]
188 + 0.5 * concat( cidsz - cidszr, [ 0 ]) )
189 Commitid_BestCount_M(cidszr);
192 crossoff = tile_hard_edge_hole_dist + POST_TCROSSSZ/2;
193 cidsz = [ thehd[0], size[1] - 2*crossoff ];
194 cidszr = [ cidsz[0], min(cidsz[1], 50) ];
196 translate( concat(botleft + [0, crossoff] + (cidsz-cidszr)/2, [0]) )
197 Commitid_BestCount(cidszr);
200 translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
201 cube(concat(size - [test_edge,test_edge]*2, [tile_th*2]));
202 translate(concat(botleft_post, [-1]))
203 cube(concat(topright_post-botleft_post, [tile_th+2]));
205 shufflesz = max(test_edge, tile_hard_edge_hole_dist)*2;
208 cube(shufflesz, center=true);
216 m4_dnl c is from Rectangle_corners and
217 m4_dnl ix is a corner number
218 m4_dnl expands to two comma-separated corners:
219 m4_dnl that denoted by ix, and the next one anticlockwise
220 m4_define(`R_EDGE',`$1[$2], $1[(($2)+1)%4]')
223 m4_dnl c is from Rectangle_corners and
224 m4_dnl ix is a corner number
225 m4_dnl expands to an array of corners as for RoundCorner
226 m4_define(`R_CNR',`[ $1[$2], $1[(($2)+1)%4], $1[(($2)+3)%4] ]')
228 m4_dnl INREFFRAME(left_cnr, right_cnr, morevars) { body; }
229 m4_define(`INREFFRAME',`
230 length_vec = ($2) - ($1);
231 length = dist2d([0,0], length_vec);
232 length_uvec = length_vec / length;
233 ortho_uvec = [ -length_uvec[1], length_uvec[0] ];
234 m = [ [ length_uvec[0], ortho_uvec[0], 0, ($1)[0], ],
235 [ length_uvec[1], ortho_uvec[1], 0, ($1)[1], ],
242 m4_dnl INREFFRAME(left_cnr, right_cnr, morevars)
243 m4_dnl INREFFRAME_EDGE { body; }
244 m4_define(`INREFFRAME_EDGE',`
245 translate([0,0, -round_edge_rad])
248 module RoundEdge(left_cnr, right_cnr) {
249 INREFFRAME(left_cnr, right_cnr)
253 cylinder(r= round_edge_rad, h= length, $fn=50);
254 translate([-1, 0, -20])
255 cube([length+2, 20, 20]);
260 m4_define(`ROUNDCORNER_VARS',`
264 bigr= round_cnr_rad - round_edge_rad;
265 l_uvec = unitvector2d(left_cnr - this_cnr);
266 r_uvec = unitvector2d(right_cnr - this_cnr);
267 lp1 = left_cnr + clockwise2d(l_uvec) * bigr;
268 lp2 = this_cnr + clockwise2d(l_uvec) * bigr;
269 lp3 = this_cnr - clockwise2d(r_uvec) * bigr;
270 lp4 = right_cnr - clockwise2d(r_uvec) * bigr;
271 ctr = line_intersection_2d(lp1,lp2,lp3,lp4);
272 ctr3 = concat(ctr,[0])
275 module RoundCorner_selector(ci, adj) {
279 INREFFRAME(ctr3,concat(lp1,[4])){
280 translate([0,0,-bigr]) linear_extrude(height=bigr*2) {
281 translate([-bigr*2 + adj, -bigr])
282 square([bigr*2, bigr*3]);
287 INREFFRAME(ctr3,concat(lp4,[0])){
288 translate([0,0,-bigr]) linear_extrude(height=bigr*2) {
289 translate([-bigr*2, -bigr*2])
290 square([bigr*2 + adj, bigr*3]);
297 module RoundCornerCut(ci) {
298 // ci should be [this_cnr, right_cnr, left_cnr]
299 // where right_cnr is to the right (ie, anticlockwise)
302 RoundCorner_selector(ci, -0.1);
304 cylinder(center=true, h=20, r= bigr);
308 module RoundCornerAdd(ci) {
311 RoundCorner_selector(ci, +0.1);
314 rotate_extrude(convexity=10, $fn=50)
317 circle(r= round_edge_rad, $fn=50);
326 module InterlockLobePlan(negative) {
327 r = negative ? interlock_negative_rad : interlock_rad;
328 ymir = negative ? 0 : 1;
332 translate([thehd[0], 0]){
336 translate([-dx, -0.1])
337 square([ dx*2, r/2 + 0.1 ]);
339 translate([ xi*dx, r ])
347 module InterlockEdgePlan(negative, nlobes, length, dosquare=true) {
348 for (lobei = [ 0 : nlobes-1 ]) {
349 lobex = (length - thehd[0]*2) * (lobei ? lobei / (nlobes-1) : 0);
350 translate([lobex, 0, 0]) {
351 InterlockLobePlan(negative);
357 slotshorter = negative ? -0.1 : interlock_fine_lenslop;
358 mirror([0, negative])
359 translate([slotshorter, iadj])
360 square([length - slotshorter*2, interlock_fine + iadj*2]);
364 module InterlockEdge(left_cnr, right_cnr, negative=0, nlobes=2) {
365 plusth = negative * 1.0;
366 protr = interlock_fine + interlock_sq_adj;
369 z1 = -tile_th/2 - protr / interlock_fine_slope;
370 z3 = -tile_th/2 + protr / interlock_fine_slope;
372 negsign = negative ? -1 : +1;
373 yprotr = negsign * protr;
375 INREFFRAME(left_cnr, right_cnr) {
376 for (vsect = [ // zs0 zs1 ys0, ys1
377 [ -tile_th-plusth, plusth, 0, 0],
378 [ z1, z2, 0, yprotr],
379 [ z2, z3, yprotr, 0],
389 [ 0,1, -sl, -ys0 + negsign*interlock_sq_adj ],
393 linear_extrude(height=zsd, convexity=10)
394 InterlockEdgePlan(negative, nlobes, length, !!ysd);
399 function TestPiece_holes2corners(holes) =
400 [ holes[0] + thehd_bl,
403 holes[0] + thehd_tl ];
405 module TestPiece1(){ ////toplevel
409 corners = TestPiece_holes2corners(holes);
410 rcs = R_CNR(corners,0);
413 TileBase(corners[0], corners[2]);
415 RoundEdge(corners[0], corners[1]);
416 RoundEdge(corners[3], corners[0]);
418 InterlockEdge(corners[1], corners[2], 1, nlobes=1);
425 module TestPiece2(){ ////toplevel
429 corners = TestPiece_holes2corners(holes);
432 TileBase(corners[0], corners[2]);
434 RoundEdge(corners[0], corners[1]);
435 InterlockEdge(corners[3], corners[0], 0, nlobes=1);
441 module TestDemo(){ ////toplevel
442 translate([ -thehd[0], 0 ])
445 translate([ +thehd[0] + demo_slop, 0 ])
449 module Machine_NewRearProfile(){
450 // figures copied out of xfig edit boxes
451 // best not to edit the posbox size if poss - just move it
452 posbox = 10 * ([7.2333,-14.1267] - [-16.2289,40.0289]); // box, Green
453 sideline = -10 * ([-6.2400,13.5600] - [-2.4467,28.2556]); // line, Blue
454 scaleline = 10 * dist2d([-1.1911,-20.4800], [-11.2600,4.0578]); // Green2
455 scaleline_mm = 12+5+10+5+3;
456 sh = -[abs(posbox[0]), abs(posbox[1])];
457 rot = atan2(-sideline[0], sideline[1]);
458 sc = scaleline_mm / scaleline;
459 //echo("SH",sh,rot,sc);
460 scale(sc) rotate(rot) translate(sh){
461 import("sewing-table-rear-profile.dxf", convexity=10); // spline, Pink3
465 module Machine_NewFrontProfile(){
466 // figures copied out of xfig edit boxes
467 // best not to edit the posbox size if poss - just move it
468 posbox = 10 * ([11.8022,8.0600] - [4.2044,19.1867]); // box, Green
469 refline = 10 * ([7.6778,16.7222] - [27.8689,17.6578]); // line, Blue
470 refline_mm = (11-1)*10;
471 sh = -[abs(posbox[0]), abs(posbox[1])];
472 rot = atan2(-refline[0], refline[1]);
473 sc = refline_mm / vectorlen2d(refline);
474 //echo("SH",sh,rot,sc);
475 mirror([1,0]) scale(sc) rotate(rot+90) translate(sh){
476 import("sewing-table-front-profile.dxf", convexity=10); // spline, Pink3
480 module Machine_NewEndProfile(){
481 // figures copied out of xfig edit boxes
482 // NB that y coords are reversed - xfig origin is at bottom left
483 posboxs = 10 * [[4.0400,17.7956], [11.6622,32.5511]]; // box, Pink3
484 refline = 10 * ([8.4000,22.6000] - [50.3000,22.2000]); // line, Blue
485 refline_mm = 10 * (11 - 2.5);
486 sidelines = 10 * [[[9.0889,20.6178], [8.9644,14.6889]],
487 [[50.3800,21.9578], [50.1933,14.4933]]]; // lines, Blue3
488 baseline = 10 * [[8.4000,18.0822], [50.3000,17.6822]]; // line, Green2
492 posbox = [min(posboxs[0][0],posboxs[1][0]),
493 max(posboxs[0][1],posboxs[1][1])];
495 m4_define(`MNEP_ELP',
496 `line_intersection_2d(baseline[0],baseline[1],
497 sidelines[$1][0],sidelines[$1][1])')
498 endline = [MNEP_ELP(0),MNEP_ELP(1)];
500 rot = atan2(-refline[1], -refline[0]);
501 sc = refline_mm / vectorlen2d(refline);
502 sh = (0.5 * (endline[0] + endline[1])) - posbox;
504 ellen = sc * dist2d(endline[0],endline[1]);
505 scy = cutout_l_end_y_total / ellen;
507 scale([scy,1]) scale(sc) rotate(rot + rot_adj) translate(-[sh[0],-sh[1]]){
510 //%translate(1 * (posboxs[0] - posbox)) square(50);
511 //%translate(1 * (posboxs[1] - posbox)) square(50);
512 // %translate(1 * (baseline[0] - posbox)) square([50,10]);
514 // %translate(1 * (endline[0] - posbox)) square([50,10]);
515 // %translate(1 * (endline[1] - posbox)) square([50,10]);
517 // %translate(1 * (sidelines[0][0] - posbox)) square([10,50]);
518 // %translate(1 * (sidelines[0][1] - posbox)) square([10,50]);
519 // %translate(1 * (sidelines[1][0] - posbox)) square([10,50]);
520 // %translate(1 * (sidelines[1][1] - posbox)) square([10,50]);
523 import("sewing-table-end-profile.dxf", convexity=10); // spline, Pink3
527 module Machine_NewEndProfileDemo(){ ////toplevel
528 translate([0,5,0]) Machine_NewEndProfile();
529 translate([0,5,1]) color("blue") mirror([1,0]) Machine_NewEndProfile();
531 translate([0,5, 0]) Machine_NewEndProfile();
532 translate([0,5,-1]) color("blue") mirror([1,0]) Machine_NewEndProfile();
536 module Machine_NewArm(){
537 translate([0,0,-30]) linear_extrude(height=60) {
538 translate(tile01_tr + [ -cutout_l_end_x - cutout_l_end_new_x_slop,
539 (-cutout_tile01_y + cutout_tile11_y)/2 ]){
543 translate([0,d]) Machine_NewEndProfile();
550 module Machine_NewRearCurve(){
551 slant = atan2(4,210-10);
553 translate([0,0, rearcurve_double_inrad]) rotate([slant,0,0]){
554 translate([ rearcurve_double_inrad,
556 -rearcurve_double_inrad + 10 ]){
557 rotate([180,0,0]) rotate([0,0,90]) linear_extrude(height=30){
559 Machine_NewRearProfile();
560 translate([0,-100]) Machine_NewRearProfile();
564 rotate([0,90,0]) rotate([90,0,0]) {
566 rotate_extrude(convexity=10, $fn=64)
568 translate([ 0, -rearcurve_double_inrad ])
569 Machine_NewRearProfile();
570 translate([0,0,-500])
571 cube([500,500,1000]);
574 translate([1,0,-rearcurve_double_inrad])
575 rotate([0,-90,0]) rotate([0,0,-90])
576 linear_extrude(height= rearcurve_strt_len + 1)
577 Machine_NewRearProfile();
581 module Machine_Curves(){ ////toplevel
582 translate([ tile01_tr[0] - cutout_l_end_x + rearedge_len,
586 translate([ -reartablet_x,
588 -reartablet_z + tablet_z_slop])
590 cube([ reartablet_x+1,
594 translate([ tile01_tr[0] - cutout_l_end_x + frontedge_len,
596 frontcurve_z_slop ]){
597 translate([0, -machine_rear_to_front, 0])
598 multmatrix([[1, -frontcurve_side_skew, 0, 0],
602 mirror([1,0,0]) rotate([0,-90,0])rotate([0,0,-90])
603 linear_extrude(height= 200)
604 Machine_NewFrontProfile();
606 translate([ tile01_tr[0] - cutout_l_end_x + rearedge_len,
608 frontcurve_z_slop ]){
609 translate([ rearcurve_strt_len,
612 Machine_NewRearCurve();
617 module TestStrapSlots(){
618 pegwidth = teststrap_peg[0];
619 for (pos = teststrapslots_at) {
621 translate(concat(pos,[0]))
622 for (mx = [0,1]) mirror([mx,0,0]) {
623 translate([ pegwidth/2, -teststrap[1]/2, -20 ])
624 cube(concat(teststrap,[40]));
629 module TestStrapPeg_any(l){ cube(concat([l],teststrap_peg)); }
631 module TestStrapPeg_Short(){ ////toplevel
632 TestStrapPeg_any(35);
635 module TestStrapPeg_Long(){ ////toplevel
636 TestStrapPeg_any(60);
639 module Machine(){ ////toplevel
646 module MachineEnvelope(){
648 p_arm_bl = [-cutout_l_end_x, -cutout_tile01_y];
649 y_arm_t = cutout_tile11_y;
650 p_crv_fl = p_arm_bl + [frontedge_len, -frontcurve_avoid_y];
651 y_crv_b = y_arm_t + rearcurve_avoid_y;
653 translate([0,0,-50]) linear_extrude(height= 100){
654 translate(p_arm_bl) square([400, y_arm_t] - p_arm_bl);
655 translate(p_crv_fl) square([400, y_crv_b] - p_crv_fl);
659 function Rectangle_corners(c0, sz) =
660 // returns the corners of a rectangle from c0 to c0+sz
661 // if sz is positive, the corners are anticlockwise starting with c0
664 c0 + [ sz[0], sz[1] ],
667 function Rectangle_corners2posts(c) =
673 module Rectangle_TileBase(c) { TileBase(c[0], c[2]); }
675 function Posts_interpolate_one(c0,c1) = [c0, (c0+c1)/2, c1];
677 module Tile02(){ ////toplevel
679 c0 = tile02_tr + -sz;
680 c = Rectangle_corners(c0, sz);
681 posts = Rectangle_corners2posts(c);
685 Rectangle_TileBase(c);
687 RoundEdge(R_EDGE(c,0));
688 RoundEdge(R_EDGE(c,3));
689 InterlockEdge(R_EDGE(c,2), 0);
691 InterlockEdge(R_EDGE(c,1), 1);
698 module Tile12(){ ////toplevel
700 c0 = tile02_tr + [-sz[0], 0];
701 c = Rectangle_corners(c0, sz);
702 posts = Rectangle_corners2posts(c);
706 Rectangle_TileBase(c);
708 RoundEdge(R_EDGE(c,2));
709 RoundEdge(R_EDGE(c,3));
711 InterlockEdge(R_EDGE(c,0), 1);
712 InterlockEdge(R_EDGE(c,1), 1);
719 tile_01_11_cnr = tile01_tr + [-cutout_l_end_x, 0];
720 tile_11_10_cnr = tile01_tr + [0, cutout_tile11_y];
721 tile_01_00_cnr = tile01_tr - [0, cutout_tile01_y];
723 module Tile11(){ ////toplevel
725 c0 = tile01_tr + [-sz[0],0];
726 c = Rectangle_corners(c0, sz);
727 cnr_posts = Rectangle_corners2posts(c);
729 Posts_interpolate_one(cnr_posts[0],
730 cnr_posts[1] - [cutout_l_end_x, 0]),
731 [ cnr_posts[1] + [0, cutout_tile11_y],
737 Rectangle_TileBase(c);
739 RoundEdge(R_EDGE(c,2));
740 InterlockEdge(R_EDGE(c,3));
742 InterlockEdge(c[0], tile_01_11_cnr, 1);
743 InterlockEdge(tile_11_10_cnr, c[2], 1);
749 module Tile01(){ ////toplevel
751 c0 = tile01_tr + -sz;
752 c = Rectangle_corners(c0, sz);
753 cnr_posts = Rectangle_corners2posts(c);
755 Posts_interpolate_one(R_EDGE(cnr_posts,0)),
756 [ cnr_posts[2] + [0, -cutout_tile01_y] ],
757 Posts_interpolate_one(cnr_posts[2] - [cutout_l_end_x, 0],
762 Rectangle_TileBase(c);
764 RoundEdge(R_EDGE(c,0));
765 InterlockEdge(tile_01_11_cnr, c[3]);
766 InterlockEdge(R_EDGE(c,3));
769 InterlockEdge(c[1], tile_01_00_cnr, 1);
774 module Tile10(){ ////toplevel
776 c0 = tile01_tr + [0,0];
777 c = Rectangle_corners(c0, sz);
778 cnr_posts = Rectangle_corners2posts(c);
779 cty = cutout_tile11_y;
780 rcy = cty + rearcurve_avoid_y;
781 posts = [ cnr_posts[0] + [ 0, cty ],
782 cnr_posts[1] + [ -sz[0] + rearedge_len - cutout_l_end_x, cty ],
783 cnr_posts[1] + [ 0, rcy ],
789 Rectangle_TileBase(c);
791 RoundEdge(R_EDGE(c,1));
792 RoundEdge(R_EDGE(c,2));
793 InterlockEdge(c[3], tile_11_10_cnr);
802 module Tile00(){ ////toplevel
804 c0 = tile01_tr + [0,-sz[1]];
805 c = Rectangle_corners(c0, sz);
807 // the edge c[1]..c[2] needs a diagonal chunk, from c1bis to c2bis
808 c2bis = [ -cutout_l_end_x + frontedge_len + frontcurve_strt_len, c[2][1] ];
811 (c[2][0] - c2bis[0]) * tan(90 - frontcurve_dualcurve_angle) ];
813 cnr_posts = Rectangle_corners2posts(c);
814 cty = cutout_tile01_y;
815 rcy = cty + frontcurve_avoid_y;
816 posts = [ cnr_posts[0],
818 0.5 * (cnr_posts[0] + cnr_posts[1]),
819 cnr_posts[2] + [ 0, -rcy ],
820 cnr_posts[2] + [ -sz[0] + frontedge_len - cutout_l_end_x, -cty ],
821 cnr_posts[3] + [ 0, -cty ]
824 rc2 = [c1bis,c2bis,c[1]];
829 Rectangle_TileBase(c);
831 RoundEdge(R_EDGE(c,0));
832 RoundEdge(c[1], c1bis);
833 InterlockEdge(tile_01_00_cnr, c[0]);
836 translate([0,0,-20]) linear_extrude(height=40) {
837 polygon([ c1bis, c1bis + [50,0], c2bis + [50,0], c2bis ]);
840 RoundEdge(c1bis, c2bis);
850 module FitTest_general(c0,sz, dobrace=false, bracexx=0){
851 c = Rectangle_corners(c0, sz);
853 bsz = sz + [bracexx,0,0];
856 Rectangle_TileBase(c);
858 translate(concat(c0, [-brace[2] + 0.1])){
860 cube(concat(bsz, [brace[2]]) - [5,0,0]);
861 translate(brace + [0,0, -25])
862 cube(concat(bsz, [50]) - brace*2 + [10,0,0]);
866 RoundEdge(R_EDGE(c,1));
872 module FitTest_PairLink(cut=false){ ////toplevel
873 cy0=-55; cy1=85; cx=132;
876 footrad_min = 1; footrad_max = 4; footrad_depth = 5;
882 straphole_x_max = legrad/sqrt(2) + footrad_max;
883 dz = cut ? adj_neg_slop : 0;
885 translate([cx - bar[0]/2, cy0, dz + bar_z_slop])
886 cube([bar[0], cy1-cy0, bar[1] - bar_z_slop]);
888 for (endy=[cy0,cy1]) {
890 translate([cx,endy,dz]){
892 for (rot=[45:90:315]) rotate(rot) {
893 translate([legrad,0,0]){
895 cylinder(r= footrad_max, h=1);
896 translate([0,0,-footrad_depth])
897 cylinder(r= footrad_min, h=1);
901 cylinder(r= footrad_min +
902 adj_neg_slop * (footrad_max-footrad_min)/footrad_depth,
907 for (rot=[45,135]) rotate(rot) {
910 translate([s*legrad,0,0])
911 cylinder(r= footrad_max, h=bar[1]);
917 for (rot=[0,180]) rotate(rot) {
918 translate([ straphole_x_max - strap[0]/2, 0,0 ])
919 cube(concat(strap,[20]), center=true);
926 module FitTest_RearCurve(){ ////toplevel
928 FitTest_general([100,0], [180,100]);
929 FitTest_PairLink(true);
934 module FitTest_FrontCurve(){ ////toplevel
940 translate([0,0,-8]) linear_extrude(height=18) {
941 translate(p0) square(sz);
942 translate(teststrapslots_at[3])
943 scale(2* [ teststrap_peg[0], teststrap[1] ])
947 FitTest_PairLink(true);
952 module FitTest_Entire(){ ////toplevel
955 szfront = [243,szrear[1]];
957 FitTest_general(p0, szrear, dobrace=true, bracexx=0);
958 FitTest_PairLink(true);
959 translate(concat(p0,[0]) + [szfront[0],-10,-40])
960 cube([100, -p0[1], 80]);
965 translate(concat(p0,[-20])) cube(concat(szrear,[40]));
967 FitTest_FrontCurve();
970 module FitTest_EntireDemo(){ ////toplevel
975 module FitTest_EndEnd(){ ////toplevel
980 FitTest_general(p0, sz);
981 translate([ p0[0] -1, p0[1]+sz2[1], -10])
982 cube([ sz2[0] +1, 50, 20 ]);
986 module FitTest_PairDemo(){ ////toplevel
990 %FitTest_FrontCurve();
991 %FitTest_RearCurve();
997 FitTest_FrontCurve();
1000 #FitTest_PairLink(true);
1006 module RoundCornerDemo_plat(cnr){
1007 mirror([0,0,1]) linear_extrude(height=1) polygon(cnr);
1010 module RoundCornerDemo(){ ////toplevel
1011 cnr = [ [-2,-3], [13,-3], [-12,9] ];
1012 translate([0,25,0]) RoundCornerDemo_plat(cnr);
1013 translate([25,0,0]) RoundCornerAdd(cnr);
1014 translate([-25,0,0]) RoundCornerCut(cnr);
1015 translate([0,-25,0]) RoundCorner_selector(cnr, 0);
1017 RoundCornerDemo_plat(cnr);
1018 RoundCornerCut(cnr);
1020 RoundCornerAdd(cnr);
1023 module Demo(){ ////toplevel
1024 translate(demo_slop*[-2,1]) color("blue") Tile12();
1025 translate(demo_slop*[-2,0]) color("red") Tile02();
1026 translate(demo_slop*[-2,1]) color("orange") Tile11();
1027 translate(demo_slop*[-2,0]) color("purple") Tile01();
1028 translate(demo_slop*[-3,1]) color("blue") Tile10();
1029 translate(demo_slop*[-3,0]) color("red") Tile00();
1037 //Machine_NewRearProfile();
1038 //Machine_NewRearCurve();
1039 //Machine_NewFrontProfile();
1040 //Machine_NewEndProfile();
1041 //Machine_NewEndProfileDemo();
1045 //MachineEnvelope();