5 openingedge_dia = 1.34;
18 outside_pushslope = 1.4;
19 outside_push_inadj = 0.82;
23 opening_protr_slop = 0.1;
25 intooth_top_slop = 0.1;
35 inside_h = opening_height/2 - opening_protrh - inside_h_xgap/2;
37 edge_or = openingedge_dia/2 + opening_protr_slop;
39 Q0 = [ openingedge_dia/2,
40 openingedge_dia/2 + opening_height/2 ];
42 p4p5d = [edge_or + ourcirc_r, 0];
44 P0 = [ pivot_x, pivoting_gap ];
46 P3t = [ P4[0], Q0[1] - openingedge_dia/2 + opening_protrh
47 - intooth_top_slop - ourcirc_r ];
48 P2 = P4 + [ -(inside_len - ourcirc_r*2), 0 ];
49 P1 = [ P2[0], P3t[1] - (inside_h + ourcirc_r*2) ];
50 P9 = [ outside_len - ourcirc_r, outside_gap/2 + ourcirc_r ];
51 P8 = P9 + [ 0, outend_height - ourcirc_r*2 ];
54 P6t = P5 + [ 0, outside_pushh - ourcirc_r*2 ];
55 P7t = [ P6t[0] + (P6t[1] - P1[1]) / outside_pushslope,
58 outside_push_inadj_slope = (P3t[1]-P4[1]) / (P6a[1]-P5[1]);
60 P3a = P3t + [ -outside_push_inadj, 0 ];
61 P6a = P6t + [ -outside_push_inadj, 0 ];
62 P7a = [ P6a[0] + (P6a[1] - P1[1]) / outside_pushslope,
65 module ExtrusionSect(){
66 cr = openingedge_dia/2;
67 toph = opening_height/2 + opening_protrh;
74 translate([-cr,10]) square([cr*2, 1]);
79 translate([-opening_depth, -toph]) {
82 square([opening_depth+6, toph*2+10]);
83 square([opening_depth+2, toph*2]);
92 circle(r = ourcirc_r, $fn=10);
97 module LeverSect(inadj=false){
98 P3 = inadj ? P3a : P3t;
99 diag = inadj ? 0 : atan(outside_push_inadj_slope);
102 PsHull([P0,P1,P2,P5,P8,P9]);
106 circle(r=edge_or, $fn=20);
107 translate([0,10]) circle(r=edge_or, $fn=20);
114 module LeverSectTop(){
117 translate([pivot_x,0]) circle(r= pivot_r + pivot_slop, $fn=20);
121 module LeverSectBot(inadj=false){
122 P6 = inadj ? P6a : P6t;
123 P7 = inadj ? P7a : P7t;
127 translate([pivot_x,0]) circle(r=pivot_r, $fn=20);
132 translate([0,0,-5]) color("white") ExtrusionSect();
138 linear_extrude(height=width, convexity=100) LeverSectTop();
141 module LeverBot(inadj=false){
142 linear_extrude(height=width, convexity=100) LeverSectBot(inadj);
146 translate([0,2,0]) LeverTop();
148 translate([0,-opening_height - 2,0]) LeverBot(true);