3 * Turn on printer and connect computer.
5 cd ~/things/Reprap/reprappro-software.git/
7 * Select "connect", wait for printer to connect
8 * Turn on the hotend and bed heaters
9 * "Load file", select the .stl file. It will be sliced.
10 * "Load file", select the _export.gcode file. It will show up on the RHS.
11 * "SD" / "Upload", accept the suggested filename (but remember it)
12 and when it is done, turn on the hotend and bed heaters again
14 * Pick ooze off nozzle with fine-nosed pliers
15 * Wait for bed (and hotend) to get up to temperature
16 * Pick ooze off nozzle with fine-nosed pliers
17 * "SD" / "Print", select the file you uploaded earlier
18 * While waiting for it to start (~1min?)
19 pick ooze off nozzle with fine-nosed pliers
20 * Watch while it starts and make sure that the skirt sticks to
21 printbed and nothing gets tangled
22 * Check that filament feed path from feedstock coil looks good.