chiark / gitweb /
elogind.git
11 years agofix signed/unsigned warning
Kay Sievers [Sat, 6 Jun 2009 19:19:56 +0000 (21:19 +0200)]
fix signed/unsigned warning

11 years agopath_id: add comments
Kay Sievers [Sat, 6 Jun 2009 18:36:46 +0000 (20:36 +0200)]
path_id: add comments

11 years agopath_id: update SCSI handling
Kay Sievers [Sat, 6 Jun 2009 18:30:56 +0000 (20:30 +0200)]
path_id: update SCSI handling

11 years agopath_id: implement in C using libudev
Kay Sievers [Sat, 6 Jun 2009 14:07:06 +0000 (16:07 +0200)]
path_id: implement in C using libudev

11 years agocleanup $attr{} substitution
Kay Sievers [Sat, 6 Jun 2009 02:54:41 +0000 (04:54 +0200)]
cleanup $attr{} substitution

11 years agoallow format substitution in path of ATTR{<path>}=="<value>"
Kay Sievers [Sat, 6 Jun 2009 02:52:52 +0000 (04:52 +0200)]
allow format substitution in path of ATTR{<path>}=="<value>"

11 years agoudevd: use enum instead of char in struct declaration
Kay Sievers [Fri, 5 Jun 2009 21:27:11 +0000 (23:27 +0200)]
udevd: use enum instead of char in struct declaration

11 years agorules: make RFKILL control device world readable
Marcel Holtmann [Fri, 5 Jun 2009 13:09:05 +0000 (15:09 +0200)]
rules: make RFKILL control device world readable

11 years agorules: do not call path_id for virtual devices
Kay Sievers [Thu, 4 Jun 2009 01:21:33 +0000 (03:21 +0200)]
rules: do not call path_id for virtual devices

11 years agoudevd: close netlink socket in worker and set cloexec
Kay Sievers [Thu, 4 Jun 2009 00:49:42 +0000 (02:49 +0200)]
udevd: close netlink socket in worker and set cloexec

11 years agoudevd: convert to event worker processes
Kay Sievers [Wed, 3 Jun 2009 23:44:04 +0000 (01:44 +0200)]
udevd: convert to event worker processes

Event processes now get re-used after they handled an event. This reduces
pressure on the CPU significantly because cloned event processes no longer
cause page faults in the main daemon. After the events have settled, the
no longer needed worker processes get killed.

11 years agostr[sp]cpyl: add __attribute__ ((sentinel))
Kay Sievers [Mon, 1 Jun 2009 19:10:29 +0000 (21:10 +0200)]
str[sp]cpyl: add __attribute__ ((sentinel))

11 years agoudevd: remove check for dev_t, DEVPATH_OLD takes care of that
Kay Sievers [Fri, 29 May 2009 16:54:03 +0000 (18:54 +0200)]
udevd: remove check for dev_t, DEVPATH_OLD takes care of that

11 years agoudevadm: settle - add --exit-if-exists=<file>
Kay Sievers [Fri, 29 May 2009 12:05:39 +0000 (14:05 +0200)]
udevadm: settle - add --exit-if-exists=<file>

11 years agocdrom_id: add error message if open() fails
Kay Sievers [Fri, 29 May 2009 11:21:38 +0000 (13:21 +0200)]
cdrom_id: add error message if open() fails

11 years agoudevadm: control - add comment to man page about --reload-rules
Kay Sievers [Thu, 28 May 2009 17:21:35 +0000 (19:21 +0200)]
udevadm: control - add comment to man page about --reload-rules

11 years agoudevd: queue-export - fix crash
Alan Jenkins [Thu, 28 May 2009 16:59:06 +0000 (17:59 +0100)]
udevd: queue-export - fix crash

The math in skip_to() was the wrong way round and allocated a
variable size array on the stack with a massively negative size.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
11 years agoudev-selinux.c: remove libudev header
Alan Jenkins [Thu, 28 May 2009 10:50:10 +0000 (12:50 +0200)]
udev-selinux.c: remove libudev header

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
11 years agocdrom_id: suppress ID_CDROM_MEDIA_STATE=blank for plain non-writable CDROM media
Kay Sievers [Mon, 25 May 2009 22:50:45 +0000 (00:50 +0200)]
cdrom_id: suppress ID_CDROM_MEDIA_STATE=blank for plain non-writable CDROM media

Some broken fake cdrom drives return ID_CDROM_MEDIA_STATE=blank.

  $ /lib/udev/cdrom_id -d /dev/sr1
  main: probing: '/dev/sr1'
  cd_inquiry: INQUIRY: [Nokia   ][S60             ][1.0 ]
  cd_profiles: GET CONFIGURATION: number of profiles 76
  cd_profiles: current profile 0x08
  cd_media_toc: READ TOC: len: 12
  cd_media_toc: last track 1 starts at block 0
  cd_media_info: disk type 00
  ID_CDROM=1
  ID_CDROM_MRW=1
  ID_CDROM_MRW_W=1
  ID_CDROM_MEDIA=1
  ID_CDROM_MEDIA_CD=1
  ID_CDROM_MEDIA_STATE=blank

Others work fine, but ID_CDROM_MEDIA_STATE is not needed for non-writable CDROM media:

  $ /lib/udev/cdrom_id -d /dev/sr1
  main: probing: '/dev/sr1'
  cd_inquiry: INQUIRY: [SanDisk ][U3 Cruzer Micro ][8.02]
  cd_profiles: GET CONFIGURATION: number of profiles 72
  cd_profiles: current profile 0x08
  cd_media_toc: READ TOC: len: 20
  cd_media_toc: track=1 info=0x4(data) start_block=0
  cd_media_toc: last track 1 starts at block 0
  cd_media_info: disk type 00
  ID_CDROM=1
  ID_CDROM_MRW=1
  ID_CDROM_MRW_W=1
  ID_CDROM_MEDIA=1
  ID_CDROM_MEDIA_CD=1
  ID_CDROM_MEDIA_STATE=complete
  ID_CDROM_MEDIA_SESSION_COUNT=1
  ID_CDROM_MEDIA_TRACK_COUNT=1
  ID_CDROM_MEDIA_TRACK_COUNT_DATA=1

11 years agotest: check string substitutions in OWNER and GROUP
Benjamin Gilbert [Fri, 22 May 2009 18:54:46 +0000 (20:54 +0200)]
test: check string substitutions in OWNER and GROUP

String substitutions in OWNER and GROUP keys were broken in udev 137-142.
Explicitly test for this, since such breakage will not manifest in typical
rulesets.

11 years agorules: add SUBSYSTEM match to scsi rules
Kay Sievers [Fri, 22 May 2009 14:44:53 +0000 (16:44 +0200)]
rules: add SUBSYSTEM match to scsi rules

On Fri, May 22, 2009 at 16:15, Alan Jenkins <alan-jenkins@tuffmail.co.uk> wrote:
> I've been looking at what is responsible for all the path lookup activity in
> coldplug.  On my debian stable system, it looks like every device gets its
> parent looked up in sysfs.  I think this is due to SUBSYSTEMS matches.
>
> I see the udev default rules are different, but it looks like they still
> test for SUBSYSTEMS on every single device. Should we add SUBSYSTEM="scsi_generic"
> to these three rules?

11 years agoupdate NEWS
Kay Sievers [Thu, 21 May 2009 21:52:09 +0000 (23:52 +0200)]
update NEWS

11 years agoudevadm: settle - make --timeout=0 working
Kay Sievers [Thu, 21 May 2009 21:49:53 +0000 (23:49 +0200)]
udevadm: settle - make --timeout=0 working

11 years agoudevd: implement a more efficient queue file format
Alan Jenkins [Thu, 21 May 2009 20:22:37 +0000 (22:22 +0200)]
udevd: implement a more efficient queue file format

Directory lookups show up in profiling. The queue files are responsible
for a large proportion of file-related system calls in udev coldplug.

Instead of creating a file for each event, append their details to a
log file.  The file is periodically rebuilt (garbage-collected) to
prevent it from growing indefinitely.

This single queue file replaces both the queue directory and the
uevent_seqnum file. On desktop systems the file tends not to grow
beyond one page. So it should also save a small amount of memory in
tmpfs.

Tests on a running EeePC indicate average savings of 5% *udevd* cpu time
as measured by oprofile. __link_path_walk is reduced from 1.5% to
1.3%. It is not completely clear where the rest of the gains come from.

In tests running ~400 events, the queue file is rebuilt about 5 times.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
11 years agoudevd: remove tiny bit of dead code
Alan Jenkins [Thu, 21 May 2009 16:31:43 +0000 (18:31 +0200)]
udevd: remove tiny bit of dead code

11 years agofix location of database files
Kay Sievers [Wed, 20 May 2009 23:44:45 +0000 (01:44 +0200)]
fix location of database files

11 years agokeep the ifdef'd udevd testing/profiling hack
Kay Sievers [Wed, 20 May 2009 23:20:18 +0000 (01:20 +0200)]
keep the ifdef'd udevd testing/profiling hack

11 years agorequire key names in uppercase
Kay Sievers [Wed, 20 May 2009 21:45:32 +0000 (23:45 +0200)]
require key names in uppercase

Drop pretty expensive case-insensitive matching, and key names in
mixed or lowercase are not supported anyway.

11 years agoremove unused GL_FORMAT from rules parser
Kay Sievers [Wed, 20 May 2009 21:12:22 +0000 (23:12 +0200)]
remove unused GL_FORMAT from rules parser

11 years agoupdate TODO
Kay Sievers [Wed, 20 May 2009 17:43:26 +0000 (19:43 +0200)]
update TODO

11 years agouse openat(), unlinkat(), fstatat()
Kay Sievers [Wed, 20 May 2009 16:58:52 +0000 (18:58 +0200)]
use openat(), unlinkat(), fstatat()

11 years agoedd_id: use openat()
Kay Sievers [Wed, 20 May 2009 16:10:26 +0000 (18:10 +0200)]
edd_id: use openat()

11 years agouse more efficient string copying
Kay Sievers [Wed, 20 May 2009 15:57:52 +0000 (17:57 +0200)]
use more efficient string copying

11 years agoudevadm: settle - fix timeout
Alan Jenkins [Wed, 20 May 2009 14:12:22 +0000 (16:12 +0200)]
udevadm: settle - fix timeout

The timeout wasn't working when settle was run as root:
  # udevadm control --stop-exec-queue
  # udevadm trigger
  # udevadm settle --timeout=1
  ... (hangs)

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
11 years agoremove format char string truncation syntax
Kay Sievers [Tue, 19 May 2009 10:56:17 +0000 (12:56 +0200)]
remove format char string truncation syntax

11 years agoOWNER/GROUP: fix if logic
Scott James Remnant [Thu, 14 May 2009 11:42:44 +0000 (12:42 +0100)]
OWNER/GROUP: fix if logic

The introduction of the --resolve-names=early/never code introduced a
bug to the OWNER/GROUP lookup.  Previously if the name had contained $,
lookup would have been performed later; after the patch, the key ended
up being ignored!

11 years agorule-generator: cd - skip by-path links if we create by-id links
Kay Sievers [Thu, 14 May 2009 10:57:19 +0000 (12:57 +0200)]
rule-generator: cd - skip by-path links if we create by-id links

11 years agoRevert "rules: v4l do not mix vbi and video nodes"
Kay Sievers [Wed, 13 May 2009 22:32:25 +0000 (00:32 +0200)]
Revert "rules: v4l do not mix vbi and video nodes"

This reverts commit 6205f1186e4980544ea425d31770358d1b2579e4.

11 years agofix possible endless loop for GOTO to non-existent LABEL
Kay Sievers [Wed, 13 May 2009 16:01:32 +0000 (18:01 +0200)]
fix possible endless loop for GOTO to non-existent LABEL

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=526365

11 years agorules: v4l do not mix vbi and video nodes
Kay Sievers [Wed, 13 May 2009 15:55:08 +0000 (17:55 +0200)]
rules: v4l do not mix vbi and video nodes

11 years agoversion bump
Kay Sievers [Wed, 13 May 2009 01:13:08 +0000 (03:13 +0200)]
version bump

11 years agorelease 142
Kay Sievers [Wed, 13 May 2009 00:35:37 +0000 (02:35 +0200)]
release 142

11 years agodelete libvolume_id
Kay Sievers [Tue, 12 May 2009 11:28:01 +0000 (13:28 +0200)]
delete libvolume_id

11 years agodelete vol_id and require util-linux-ng's blkid
Kay Sievers [Mon, 11 May 2009 02:12:23 +0000 (04:12 +0200)]
delete vol_id and require util-linux-ng's blkid

11 years agoupdate TODO
Kay Sievers [Mon, 11 May 2009 01:53:55 +0000 (03:53 +0200)]
update TODO

11 years agoadd "static" back to the inline functions
Kay Sievers [Thu, 7 May 2009 11:24:40 +0000 (13:24 +0200)]
add "static" back to the inline functions

<Keybuk> kay: udev git head ftbfs
<Keybuk> udev-watch.o: In function `udev_selinux_init':
<Keybuk> /../udev/udev.h:130: multiple definition of `udev_selinux_init'

11 years agorules: fix ieee1394 rules
Kay Sievers [Tue, 5 May 2009 10:43:42 +0000 (12:43 +0200)]
rules: fix ieee1394 rules

11 years agoremove asmlinkage
Kay Sievers [Tue, 5 May 2009 00:39:16 +0000 (02:39 +0200)]
remove asmlinkage

11 years agoremove all PHYSDEVPATH handling and warning about
Kay Sievers [Mon, 4 May 2009 20:08:05 +0000 (22:08 +0200)]
remove all PHYSDEVPATH handling and warning about

11 years agooops, removed ppp entry from rules got committed
Kay Sievers [Mon, 4 May 2009 12:10:05 +0000 (14:10 +0200)]
oops, removed ppp entry from rules got committed

11 years agohandle devtmpfs nodes
Kay Sievers [Mon, 4 May 2009 02:52:31 +0000 (04:52 +0200)]
handle devtmpfs nodes

UDev follows the kernel given name, and re-uses the kernel created
device node. If the kernel and spcecified udev rules disagree, the
udev specified node node is created and the kernel-created on is
deleted.

11 years agorule-generator: net - whitelist NICs that violate MAC local scheme
Lubomir Rintel [Sun, 3 May 2009 13:37:30 +0000 (15:37 +0200)]
rule-generator: net - whitelist NICs that violate MAC local scheme

According to list of assigned ethernet codes [1] referred to by
IANA [2] certain global addresses do not follow the assignement
scheme and use numbers reserved for local use. Several such adapters
are quite widely used, generate rules for them.

[1] http://www.cavebear.com/archive/cavebear/Ethernet/vendor.html
[2] http://www.iana.org/assignments/ethernet-numbers

11 years agorules: remove initramfs comment
Kay Sievers [Sun, 3 May 2009 12:44:23 +0000 (14:44 +0200)]
rules: remove initramfs comment

11 years agoudevd: revert initial device node creation
Kay Sievers [Sat, 2 May 2009 03:23:02 +0000 (05:23 +0200)]
udevd: revert initial device node creation

11 years agorules: add "event*" match
Kay Sievers [Fri, 1 May 2009 15:52:21 +0000 (17:52 +0200)]
rules: add "event*" match

11 years agobuild: use AC_MSG_RESULT
Kay Sievers [Fri, 1 May 2009 03:09:51 +0000 (05:09 +0200)]
build: use AC_MSG_RESULT

11 years agoupdate TODO
Kay Sievers [Wed, 29 Apr 2009 13:57:41 +0000 (15:57 +0200)]
update TODO

11 years agoaccept DEVNAME from the kernel as a hint for the node name
Kay Sievers [Tue, 28 Apr 2009 13:59:45 +0000 (15:59 +0200)]
accept DEVNAME from the kernel as a hint for the node name

11 years agorules: add rfcomm* to group dialout
Kay Sievers [Tue, 28 Apr 2009 09:24:25 +0000 (11:24 +0200)]
rules: add rfcomm* to group dialout

https://bugs.launchpad.net/bugs/368109

11 years agorules: input - fix comments
Kay Sievers [Mon, 27 Apr 2009 01:50:48 +0000 (03:50 +0200)]
rules: input - fix comments

11 years agorules: input - add links for USB/platform non-kbd/mouse devices
Kay Sievers [Mon, 27 Apr 2009 01:23:41 +0000 (03:23 +0200)]
rules: input - add links for USB/platform non-kbd/mouse devices

11 years agorule_generator: net - fix usb comment generation
Kay Sievers [Sun, 26 Apr 2009 18:53:30 +0000 (20:53 +0200)]
rule_generator: net - fix usb comment generation

On Sat, Apr 4, 2009 at 22:17, Omair Eshkenazi <stimpson@phys.huji.ac.il> wrote:
> I noticed that in (70-)persistent-net.rules, the comments for USB devices
> are missing the device/vendor id's. Example:
> # USB device 0x:0x (rt73usb)

11 years agodrop "extern" keyword from non-static function
Kay Sievers [Sun, 26 Apr 2009 11:59:39 +0000 (13:59 +0200)]
drop "extern" keyword from non-static function

11 years agoupdate NEWS
Kay Sievers [Fri, 24 Apr 2009 00:27:44 +0000 (02:27 +0200)]
update NEWS

11 years agorules: create /dev/cpu/<n>/cpuid world readable
Andre Przywara [Thu, 23 Apr 2009 22:29:53 +0000 (00:29 +0200)]
rules: create /dev/cpu/<n>/cpuid world readable

I don't see any security implications, to be actually useful,
/dev/cpu/<n>/cpuid should be world readable. The cpuid instruction
can be called from userspace anyway, so there is nothing to hide.
The device does not support any write operation, so 0444 should
suffice.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
11 years agolibudev: monitor - export filter_update()
Kay Sievers [Thu, 23 Apr 2009 16:05:10 +0000 (18:05 +0200)]
libudev: monitor - export filter_update()

11 years agolibudev: queue - clarify comments
Kay Sievers [Thu, 23 Apr 2009 13:16:26 +0000 (15:16 +0200)]
libudev: queue - clarify comments

11 years agocdrom_id: skip media tests if CDROM_DRIVE_STATUS != CDS_DISC_OK
Kay Sievers [Thu, 23 Apr 2009 13:04:16 +0000 (15:04 +0200)]
cdrom_id: skip media tests if CDROM_DRIVE_STATUS != CDS_DISC_OK

11 years agolibudev: queue - fix get_seqnum_is_finished()
Kay Sievers [Thu, 23 Apr 2009 11:23:45 +0000 (13:23 +0200)]
libudev: queue - fix get_seqnum_is_finished()

On Thu, Apr 23, 2009 at 11:39, Alan Jenkins <alan-jenkins@tuffmail.co.uk> wrote:
> I'm puzzled by this function:
>
>        /* if we have not seen this seqnum, check if it is/was already queued */
>        if (seqnum < udev_queue->last_seen_udev_seqnum) {
>                udev_queue_get_udev_seqnum(udev_queue);
>                if (seqnum < udev_queue->last_seen_udev_seqnum)
>
> Shouldn't the test be (seqnum > udev_queue->last_seen_udev_seqnum) ?

11 years agolibudev: monitor - add udev_monitor_filter_remove
Kay Sievers [Thu, 23 Apr 2009 02:07:51 +0000 (04:07 +0200)]
libudev: monitor - add udev_monitor_filter_remove

11 years agoudevadm: monitor - add <subsytem>:<devtype> support
Kay Sievers [Thu, 23 Apr 2009 02:07:15 +0000 (04:07 +0200)]
udevadm: monitor - add <subsytem>:<devtype> support

11 years agolibudev: monitor - do not filter messages with wrong magic
Kay Sievers [Thu, 23 Apr 2009 01:33:58 +0000 (03:33 +0200)]
libudev: monitor - do not filter messages with wrong magic

11 years agolibudev: monitor - switch to filter_add_match_subsystem_devtype()
Kay Sievers [Thu, 23 Apr 2009 01:24:38 +0000 (03:24 +0200)]
libudev: monitor - switch to filter_add_match_subsystem_devtype()

11 years agolibudev: monitor - use simpler hash
Kay Sievers [Wed, 22 Apr 2009 16:38:16 +0000 (18:38 +0200)]
libudev: monitor - use simpler hash

11 years agoedd_id: add cciss devices
John Wright [Wed, 22 Apr 2009 12:53:35 +0000 (14:53 +0200)]
edd_id: add cciss devices

Since cciss devices can be BIOS boot devices just as well as sd* and
hd*, the edd_id program should be run on them so that the later
/dev/disk/by-id/edd-* rules will work.

11 years agoudevadm monitor - add --subsystem-match=
Kay Sievers [Wed, 22 Apr 2009 03:00:15 +0000 (05:00 +0200)]
udevadm monitor - add --subsystem-match=

11 years agoupdate TODO
Kay Sievers [Wed, 22 Apr 2009 02:32:25 +0000 (04:32 +0200)]
update TODO

11 years agoudevadm: monitor - print error if we can not bind to socket
Kay Sievers [Wed, 22 Apr 2009 02:11:18 +0000 (04:11 +0200)]
udevadm: monitor - print error if we can not bind to socket

11 years agolibudev: monitor - add client socket filter for subsystem value
Kay Sievers [Wed, 22 Apr 2009 01:50:11 +0000 (03:50 +0200)]
libudev: monitor - add client socket filter for subsystem value

Messages send back by the udev daemon to the netlink socket are
multiplexed by the kernel and delivered to multiple clients. The
clients can upload a socket filter to let the kernel drop messages
not belonging to a certain subsystem. This prevent needless wakeups
and message processing for users who are only interested in a
subset of available events.

Recent kernels allow untrusted users to listen to the netlink
messages.

The messages send by the udev daemon are versioned, to prevent any
custom software reading them without libudev. The message wire format
may change with any udev version update.

11 years agocdrom_id: add and use ID_CDROM_MEDIA to decide if we run vol_id
Kay Sievers [Tue, 21 Apr 2009 01:27:14 +0000 (03:27 +0200)]
cdrom_id: add and use ID_CDROM_MEDIA to decide if we run vol_id

Some broken mobile phones offer a faked cdrom drive with a media
without any tracks.

11 years agoudevd: at startup create /dev/null, /dev/console, /dev/kmsg
Kay Sievers [Sun, 19 Apr 2009 01:25:04 +0000 (03:25 +0200)]
udevd: at startup create /dev/null, /dev/console, /dev/kmsg

11 years agoupdate NEWS
Kay Sievers [Sat, 18 Apr 2009 11:24:20 +0000 (13:24 +0200)]
update NEWS

11 years agoTODO: add packet filter
Kay Sievers [Sat, 18 Apr 2009 11:23:55 +0000 (13:23 +0200)]
TODO: add packet filter

11 years agotest-libudev: update monitor source
Kay Sievers [Sat, 18 Apr 2009 11:23:10 +0000 (13:23 +0200)]
test-libudev: update monitor source

11 years agocdrom_id: add Xen cdrom support
Kay Sievers [Thu, 16 Apr 2009 22:29:56 +0000 (00:29 +0200)]
cdrom_id: add Xen cdrom support

11 years agopath_id: support identification of Xen virtual block devices
Ian Campbell [Thu, 16 Apr 2009 20:46:18 +0000 (22:46 +0200)]
path_id: support identification of Xen virtual block devices

11 years agoupdate NEWS
Kay Sievers [Thu, 16 Apr 2009 20:36:26 +0000 (22:36 +0200)]
update NEWS

11 years agorules: remove DVB shell script
Kay Sievers [Thu, 16 Apr 2009 20:35:59 +0000 (22:35 +0200)]
rules: remove DVB shell script

11 years agoudevd: log error for too old kernels or CONFIG_SYSFS_DEPRECATED
Kay Sievers [Thu, 16 Apr 2009 20:34:26 +0000 (22:34 +0200)]
udevd: log error for too old kernels or CONFIG_SYSFS_DEPRECATED

11 years agolibudev: monitor - clarify socket handling documentation
Kay Sievers [Wed, 15 Apr 2009 23:49:16 +0000 (01:49 +0200)]
libudev: monitor - clarify socket handling documentation

11 years agolibudev: path_encode - always return 0 if encoded string does not fit into size
Kay Sievers [Wed, 15 Apr 2009 19:47:04 +0000 (21:47 +0200)]
libudev: path_encode - always return 0 if encoded string does not fit into size

11 years agoversion bump
Kay Sievers [Tue, 14 Apr 2009 19:02:39 +0000 (21:02 +0200)]
version bump

11 years agorelease 141
Kay Sievers [Wed, 8 Apr 2009 23:35:53 +0000 (16:35 -0700)]
release 141

11 years agolibudev: monitor - ignore messages from unusual sources
Scott James Remnant [Wed, 8 Apr 2009 23:16:14 +0000 (16:16 -0700)]
libudev: monitor - ignore messages from unusual sources

For added protection, ignore any unicast message received on the
netlink socket or any multicast message on the kernel group not
received from the kernel.

Signed-off-by: Scott James Remnant <scott@ubuntu.com>
11 years agolibudev: monitor - unify socket message handling
Kay Sievers [Wed, 8 Apr 2009 14:46:54 +0000 (07:46 -0700)]
libudev: monitor - unify socket message handling

11 years agopath_encode: fix max length calculation
Kay Sievers [Wed, 8 Apr 2009 13:06:01 +0000 (06:06 -0700)]
path_encode: fix max length calculation

Sebastian Krahmer wrote:
> it should reserve 4 times not 3 times len :)

11 years agoavoid leaking netlink socket fd to external programs
Alan Jenkins [Mon, 6 Apr 2009 09:18:41 +0000 (10:18 +0100)]
avoid leaking netlink socket fd to external programs

The netlink socket is now used by udev event processes. We should take
care not to pass it to the programs they execute. This is the same way
the inotify fd was handled.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
11 years agoIMPORT: 2048 -> 4096 bytes buffer
Kay Sievers [Mon, 30 Mar 2009 18:09:08 +0000 (20:09 +0200)]
IMPORT: 2048 -> 4096 bytes buffer

11 years ago"UDEV_MONITOR_KERNEL/UDEV" -> "kernel/udev"
Kay Sievers [Sun, 29 Mar 2009 18:08:52 +0000 (20:08 +0200)]
"UDEV_MONITOR_KERNEL/UDEV" -> "kernel/udev"

11 years agosend monitor events back to netlink socket
Kay Sievers [Sun, 29 Mar 2009 02:24:39 +0000 (04:24 +0200)]
send monitor events back to netlink socket

Instead of of our own private monitor socket, we send the
processed event back to our netlink socket, to the multicast
group 2 -- so any number of users can listen to udev events,
just like they can listen to kernel emitted events on group 1.