https://bugs.freedesktop.org/show_bug.cgi?id=55890
Fixed typos, serial comma, and removed "either" as there were more
than two options. Also did an extra rename of "system-shutdown"
to "systemd-shutdown" that was forgotten in commit
8bd3b8620c80d0f2383f2fb04315411fc8077ca1
38 files changed:
paths in the <filename>/sys</filename>
file system. To create a new seat
attach at least one graphics card to a
paths in the <filename>/sys</filename>
file system. To create a new seat
attach at least one graphics card to a
- previously unused seat name. seat
+ previously unused seat name. Seat
names may consist only of a-z, A-Z,
0-9, "-" and "_" and must be prefixed
with "seat". To drop assignment of a
names may consist only of a-z, A-Z,
0-9, "-" and "_" and must be prefixed
with "seat". To drop assignment of a
<para><function>sd_id128_from_string()</function>
implements the reverse operation: it takes a 33
<para><function>sd_id128_from_string()</function>
implements the reverse operation: it takes a 33
- character array with 32 hexadecimial digits
+ character array with 32 hexadecimal digits
(terminated by NUL) and parses them back into an
128 bit ID returned in
<parameter>ret</parameter>.</para>
(terminated by NUL) and parses them back into an
128 bit ID returned in
<parameter>ret</parameter>.</para>
<para>When formatting a 128 bit ID into a string it is
often easier to use a format string for
<citerefentry><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry>. This
<para>When formatting a 128 bit ID into a string it is
often easier to use a format string for
<citerefentry><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry>. This
- is easly done using the
+ is easily done using the
<function>SD_ID128_FORMAT_STR</function> and
<function>SD_ID128_FORMAT_VAL()</function> macros. For
more information see
<function>SD_ID128_FORMAT_STR</function> and
<function>SD_ID128_FORMAT_VAL()</function> macros. For
more information see
<para><function>sd_is_socket()</function> may be
called to check whether the specified file descriptor
<para><function>sd_is_socket()</function> may be
called to check whether the specified file descriptor
- refers to a socket. It the
+ refers to a socket. If the
<parameter>family</parameter> parameter is not
AF_UNSPEC it is checked whether the socket is of the
specified family (AF_UNIX, AF_INET, ...). If the
<parameter>family</parameter> parameter is not
AF_UNSPEC it is checked whether the socket is of the
specified family (AF_UNIX, AF_INET, ...). If the
optionally checks the IPv4 or IPv6 port number the
socket is bound to, unless <parameter>port</parameter>
is zero. For this call <parameter>family</parameter>
optionally checks the IPv4 or IPv6 port number the
socket is bound to, unless <parameter>port</parameter>
is zero. For this call <parameter>family</parameter>
- must be passed as either AF_UNSPEC, AF_INET or
+ must be passed as either AF_UNSPEC, AF_INET, or
AF_INET6.</para>
<para><function>sd_is_socket_unix()</function> is
AF_INET6.</para>
<para><function>sd_is_socket_unix()</function> is
again.</para>
<para>Note that filtering via matches only applies to
again.</para>
<para>Note that filtering via matches only applies to
- way the journal is read, it has no effect on storage
+ the way the journal is read, it has no effect on storage
on disk.</para>
</refsect1>
on disk.</para>
</refsect1>
<para><function>sd_journal_get_fd()</function> returns
a file descriptor that may be asynchronously polled in
<para><function>sd_journal_get_fd()</function> returns
a file descriptor that may be asynchronously polled in
- an external event loop and is signalled readable as
+ an external event loop and is signaled readable as
soon as the journal changes, for example because new
entries were added. The file descriptor is suitable
for usage in
soon as the journal changes, for example because new
entries were added. The file descriptor is suitable
for usage in
as a wrapper around
<citerefentry><refentrytitle>sd_journal_seek_head</refentrytitle><manvolnum>3</manvolnum></citerefentry>
and <function>sd_journal_next()</function> in order to
as a wrapper around
<citerefentry><refentrytitle>sd_journal_seek_head</refentrytitle><manvolnum>3</manvolnum></citerefentry>
and <function>sd_journal_next()</function> in order to
- make iteratring through the journal easier. See below
+ make iterating through the journal easier. See below
for an example. Similar,
<function>SD_JOURNAL_FOREACH_BACKWARDS()</function>
may be used for iterating the journal in reverse
for an example. Similar,
<function>SD_JOURNAL_FOREACH_BACKWARDS()</function>
may be used for iterating the journal in reverse
<refsect1>
<title>Description</title>
<refsect1>
<title>Description</title>
- <para><function>sd_journal_open()</function> opens the
+ <para><function>sd_journal_open()</function> opens
the log journal for reading. It will find all journal
files automatically and interleave them automatically
when reading. As first argument it takes a pointer to
the log journal for reading. It will find all journal
files automatically and interleave them automatically
when reading. As first argument it takes a pointer to
<para>See
<citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for an example how to iterate through the journal
<para>See
<citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for an example how to iterate through the journal
- after opening it it with
<function>sd_journal_open()</function>.</para>
<para>A journal context object returned by
<function>sd_journal_open()</function>.</para>
<para>A journal context object returned by
<filename>sd-journal.h</filename>.</para>
<para><citerefentry><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>
<filename>sd-journal.h</filename>.</para>
<para><citerefentry><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>
- and and <function>sd_journal_print()</function> may
+ and <function>sd_journal_print()</function> may
largely be used interchangeably
functionality-wise. However, note that log messages
logged via the former take a different path to the
largely be used interchangeably
functionality-wise. However, note that log messages
logged via the former take a different path to the
<para><function>sd_journal_seek_realtime_usec()</function>
seeks to the entry with the specified realtime
(wallclock) timestamp, i.e. CLOCK_REALTIME. Note that
<para><function>sd_journal_seek_realtime_usec()</function>
seeks to the entry with the specified realtime
(wallclock) timestamp, i.e. CLOCK_REALTIME. Note that
- the realtime clock is not necessary monotonic. If a
+ the realtime clock is not necessarily monotonic. If a
realtime timestamp is ambiguous it is not defined
which position is sought to.</para>
realtime timestamp is ambiguous it is not defined
which position is sought to.</para>
for more information.</para>
<para>It is recommended that applications log UTF-8
for more information.</para>
<para>It is recommended that applications log UTF-8
- mesages only with this API, but this is not
+ messages only with this API, but this is not
enforced.</para>
</refsect1>
enforced.</para>
</refsect1>
<title>Description</title>
<para><function>sd_login_monitor_new()</function> may
<title>Description</title>
<para><function>sd_login_monitor_new()</function> may
- be used to monitor login session, users and seats. Via
+ be used to monitor login sessions, users and seats. Via
a monitor object a file descriptor can be integrated
into an application defined event loop which is woken
up each time a user logs in, logs out or a seat is
added or removed, or a session, user, or seat changes
state otherwise. The first parameter takes a string
a monitor object a file descriptor can be integrated
into an application defined event loop which is woken
up each time a user logs in, logs out or a seat is
added or removed, or a session, user, or seat changes
state otherwise. The first parameter takes a string
- which can be either <literal>seat</literal> (to get
+ which can be <literal>seat</literal> (to get
only notifications about seats being added, removed or
changed), <literal>session</literal> (to get only
notifications about sessions being created or removed
or changed) or <literal>uid</literal> (to get only
notifications when a user changes state in respect to
logins). If notifications shall be generated in all
only notifications about seats being added, removed or
changed), <literal>session</literal> (to get only
notifications about sessions being created or removed
or changed) or <literal>uid</literal> (to get only
notifications when a user changes state in respect to
logins). If notifications shall be generated in all
- these conditions, NULL may be passed. Note that in
+ these conditions, NULL may be passed. Note that in the
future additional categories may be defined. The
second parameter returns a monitor object and needs to
be freed with the
future additional categories may be defined. The
second parameter returns a monitor object and needs to
be freed with the
processes.</para>
<para>The <parameter>state</parameter> parameter
processes.</para>
<para>The <parameter>state</parameter> parameter
- should contain an newline-separated list of variable
+ should contain a newline-separated list of variable
assignments, similar in style to an environment
block. A trailing newline is implied if none is
specified. The string may contain any kind of variable
assignments, similar in style to an environment
block. A trailing newline is implied if none is
specified. The string may contain any kind of variable
definition file has Type=notify
set. The passed argument is a boolean
"1" or "0". Since there is little
definition file has Type=notify
set. The passed argument is a boolean
"1" or "0". Since there is little
- value in signalling non-readiness, the
+ value in signaling non-readiness, the
only value daemons should send is
"READY=1".</para></listitem>
</varlistentry>
only value daemons should send is
"READY=1".</para></listitem>
</varlistentry>
and not being a shared process of a user this function
will fail.</para>
and not being a shared process of a user this function
will fail.</para>
- <para>If the <literal>pid</literal> paramater of any
+ <para>If the <literal>pid</literal> parameter of any
of these functions is passed as 0 the operation is
executed for the calling process.</para>
</refsect1>
of these functions is passed as 0 the operation is
executed for the calling process.</para>
</refsect1>
<title>Return Value</title>
<para> On success
<title>Return Value</title>
<para> On success
- <function>sd_seat_get_active()</function> return
- return 0 or a positive integer. On success
+ <function>sd_seat_get_active()</function>
+ returns 0 or a positive integer. On success
<function>sd_seat_get_sessions()</function> returns
the number of entries in the session identifier
array. If the test succeeds
<function>sd_seat_get_sessions()</function> returns
the number of entries in the session identifier
array. If the test succeeds
<para><function>sd_uid_get_sessions()</function> may
be used to determine the current sessions of the
<para><function>sd_uid_get_sessions()</function> may
be used to determine the current sessions of the
- specified user. Acceptes a Unix user identifier as
+ specified user. Accepts a Unix user identifier as
parameter. The <parameter>require_active</parameter>
parameter controls whether the returned list shall
consist of only those sessions where the user is
parameter. The <parameter>require_active</parameter>
parameter controls whether the returned list shall
consist of only those sessions where the user is
execute it immediately. If passed no
required units of the unit passed will
be pulled in, and no ordering
execute it immediately. If passed no
required units of the unit passed will
be pulled in, and no ordering
- dependencies will be honoured. This is
+ dependencies will be honored. This is
mostly a debugging and rescue tool for
the administrator and should not be
used by
mostly a debugging and rescue tool for
the administrator and should not be
used by
configuration after completing the
disabling of the units. Note that this
command does not implicitly stop the
configuration after completing the
disabling of the units. Note that this
command does not implicitly stop the
- units that is being disabled. If this
+ units that are being disabled. If this
is desired an additional
<command>stop</command> command should
be executed afterwards.</para>
is desired an additional
<command>stop</command> command should
be executed afterwards.</para>
<term><command>is-enabled [NAME...]</command></term>
<listitem><para>Checks whether any of
<term><command>is-enabled [NAME...]</command></term>
<listitem><para>Checks whether any of
- the specified unit files is enabled
+ the specified unit files are enabled
(as with
<command>enable</command>). Returns an
exit code of 0 if at least one is
(as with
<command>enable</command>). Returns an
exit code of 0 if at least one is
url="http://www.freedesktop.org/wiki/Software/systemd/PasswordAgents">systemd
Password Agent Specification</ulink>.</para>
url="http://www.freedesktop.org/wiki/Software/systemd/PasswordAgents">systemd
Password Agent Specification</ulink>.</para>
- <para>If a password is queried on a tty the user may
+ <para>If a password is queried on a TTY the user may
press TAB to hide the asterisks normally shown for
each character typed. Pressing Backspace as first key
achieves the same effect.</para>
press TAB to hide the asterisks normally shown for
each character typed. Pressing Backspace as first key
achieves the same effect.</para>
to. Otherwise the full systemd control group hierarchy
is shown.</para>
to. Otherwise the full systemd control group hierarchy
is shown.</para>
- <para>By default empty control cgroups are not
+ <para>By default empty control groups are not
shown.</para>
</refsect1>
shown.</para>
</refsect1>
<listitem><para>Don't hide empty
control groups in the
<listitem><para>Don't hide empty
control groups in the
- outpout.</para></listitem>
+ output.</para></listitem>
</varlistentry>
<varlistentry>
</varlistentry>
<varlistentry>
<literal>no</literal> disables the
generator
entirely. <varname>rd.luks=</varname>
<literal>no</literal> disables the
generator
entirely. <varname>rd.luks=</varname>
- is honoured only be initial RAM disk
+ is honored only by initial RAM disk
- <varname>luks=</varname> is honoured
+ <varname>luks=</varname> is honored
by both the main system and the
initrd. </para></listitem>
</varlistentry>
by both the main system and the
initrd. </para></listitem>
</varlistentry>
(<varname>luks.uuid=</varname> will
still work
however). <varname>rd.luks.crypttab=</varname>
(<varname>luks.uuid=</varname> will
still work
however). <varname>rd.luks.crypttab=</varname>
- is honoured only be initial RAM disk
+ is honored only by initial RAM disk
(initrd) while
<varname>luks.crypttab=</varname> is
(initrd) while
<varname>luks.crypttab=</varname> is
- honoured by both the main system and
+ honored by both the main system and
the initrd. </para></listitem>
</varlistentry>
the initrd. </para></listitem>
</varlistentry>
option may be specified more than once
in order to set up multiple
devices. <varname>rd.luks.uuid=</varname>
option may be specified more than once
in order to set up multiple
devices. <varname>rd.luks.uuid=</varname>
- is honoured only be initial RAM disk
+ is honored only by initial RAM disk
(initrd) while
<varname>luks.uuid=</varname> is
(initrd) while
<varname>luks.uuid=</varname> is
- honoured by both the main system and
+ honored by both the main system and
the initrd.</para></listitem>
</varlistentry>
</variablelist>
the initrd.</para></listitem>
</varlistentry>
</variablelist>
comma-separated list of desired
difference types.</para>
comma-separated list of desired
difference types.</para>
- <para>Recognised types are:
+ <para>Recognized types are:
<variablelist>
<varlistentry>
<variablelist>
<varlistentry>
<para><command>systemd-detect-virt</command> detects
execution in a virtualized environment. It identifies
<para><command>systemd-detect-virt</command> detects
execution in a virtualized environment. It identifies
- the virtualization technology and can distuingish full
+ the virtualization technology and can distinguish full
VM virtualization from container
virtualization.</para>
VM virtualization from container
virtualization.</para>
for details) into native systemd units early at boot
and when configuration of the system manager is
reloaded. This will instantiate mount and swap units
for details) into native systemd units early at boot
and when configuration of the system manager is
reloaded. This will instantiate mount and swap units
- units as necessary.</para>
<para>See
<citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>
<para>See
<citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>
generator to ignore any mounts or swaps
configured in
<filename>/etc/fstab</filename>. <varname>rd.fstab=</varname>
generator to ignore any mounts or swaps
configured in
<filename>/etc/fstab</filename>. <varname>rd.fstab=</varname>
- is honoured only be initial RAM disk
+ is honored only by initial RAM disk
(initrd) while
<varname>luks.fstab=</varname> is
(initrd) while
<varname>luks.fstab=</varname> is
- honoured by both the main system and
+ honored by both the main system and
the initrd. </para></listitem>
</varlistentry>
the initrd. </para></listitem>
</varlistentry>
<para>Immediately before executing the actual system
halt/poweroff/reboot/kexec
<para>Immediately before executing the actual system
halt/poweroff/reboot/kexec
- <filename>system-shutdown</filename> will run all
+ <filename>systemd-shutdown</filename> will run all
executables in
<filename>/usr/lib/systemd/system-shutdown/</filename>
and pass one arguments to them: either
executables in
<filename>/usr/lib/systemd/system-shutdown/</filename>
and pass one arguments to them: either
may be specified in
<citerefentry><refentrytitle>systemd-logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Note
that <literal>delay</literal> is only
may be specified in
<citerefentry><refentrytitle>systemd-logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Note
that <literal>delay</literal> is only
- available or <literal>sleep</literal>
+ available for <literal>sleep</literal>
and
<literal>shutdown</literal>.</para></listitem>
</varlistentry>
and
<literal>shutdown</literal>.</para></listitem>
</varlistentry>
<title>Kernel Command Line</title>
<para>A few configuration parameters from
<title>Kernel Command Line</title>
<para>A few configuration parameters from
- <filename>journald.conf</filename> may be overriden on
+ <filename>journald.conf</filename> may be overridden on
the kernel command line:</para>
<variablelist>
the kernel command line:</para>
<variablelist>
list of capability names, see
<citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for more information. Note that the
list of capability names, see
<citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for more information. Note that the
- the following capabilities will be
+ following capabilities will be
granted in any way: CAP_CHOWN,
CAP_DAC_OVERRIDE, CAP_DAC_READ_SEARCH,
CAP_FOWNER, CAP_FSETID, CAP_IPC_OWNER,
granted in any way: CAP_CHOWN,
CAP_DAC_OVERRIDE, CAP_DAC_READ_SEARCH,
CAP_FOWNER, CAP_FSETID, CAP_IPC_OWNER,
for the actual system suspend. Similar,
<filename>systemd-hibernate.service</filename> is
pulled in by <filename>hibernate.target</filename> to
for the actual system suspend. Similar,
<filename>systemd-hibernate.service</filename> is
pulled in by <filename>hibernate.target</filename> to
- executed the actual hibernation.</para>
+ execute the actual hibernation.</para>
<para>Immediately before entering system suspend and
hibernation
<para>Immediately before entering system suspend and
hibernation
<term><option>--exec-delay=</option></term>
<listitem>
<term><option>--exec-delay=</option></term>
<listitem>
- <para>Delay the execution of RUN intruction by the given
+ <para>Delay the execution of RUN instruction by the given
number of seconds. This option might be useful when
debugging system crashes during coldplug caused by loading
non-working kernel modules.</para>
number of seconds. This option might be useful when
debugging system crashes during coldplug caused by loading
non-working kernel modules.</para>
<term><varname>udev.exec-delay=</varname></term>
<term><varname>rd.udev.exec-delay=</varname></term>
<listitem>
<term><varname>udev.exec-delay=</varname></term>
<term><varname>rd.udev.exec-delay=</varname></term>
<listitem>
- <para>Delay the execution of RUN intruction by the given
+ <para>Delay the execution of RUN instruction by the given
number of seconds. This option might be useful when
debugging system crashes during coldplug caused by loading
non-working kernel modules.</para>
number of seconds. This option might be useful when
debugging system crashes during coldplug caused by loading
non-working kernel modules.</para>
<title>Kernel Command Line</title>
<para>A few configuration parameters from
<title>Kernel Command Line</title>
<para>A few configuration parameters from
- <filename>vconsole.conf</filename> may be overriden on
+ <filename>vconsole.conf</filename> may be overridden on
the kernel command line:</para>
<variablelist>
the kernel command line:</para>
<variablelist>
<listitem><para>Takes an absolute path
of a directory of the automount
point. If the automount point is not
<listitem><para>Takes an absolute path
of a directory of the automount
point. If the automount point is not
- existing at time of the automount
+ existing at time that the automount
point is installed it is created. This
string must be reflected in the unit
file name. (See above.) This option is
point is installed it is created. This
string must be reflected in the unit
file name. (See above.) This option is
capabilities will be included, the
effect of the assignment
inverted. Note that this option also
capabilities will be included, the
effect of the assignment
inverted. Note that this option also
- effects the respective capabilities in
+ affects the respective capabilities in
the effective, permitted and
inheritable capability sets. The
capability bounding set may also be
the effective, permitted and
inheritable capability sets. The
capability bounding set may also be
<listitem><para>Sets the timer slack
in nanoseconds for PID 1 which is then
inherited to all executed processes,
<listitem><para>Sets the timer slack
in nanoseconds for PID 1 which is then
inherited to all executed processes,
- unless overriden individually, for
+ unless overridden individually, for
example with the
<varname>TimerSlackNSec=</varname>
setting in service units (for details
example with the
<varname>TimerSlackNSec=</varname>
setting in service units (for details
<varname>infinity</varname> to
configure no limit on a specific
resource. These settings may be
<varname>infinity</varname> to
configure no limit on a specific
resource. These settings may be
- overriden in individual units
+ overridden in individual units
using the corresponding LimitXXX=
directives. Note that these resource
limits are only defaults for units,
using the corresponding LimitXXX=
directives. Note that these resource
limits are only defaults for units,
<term><varname>_SYSTEMD_OWNER_UID=</varname></term>
<listitem>
<term><varname>_SYSTEMD_OWNER_UID=</varname></term>
<listitem>
- <para>The contol group path in
+ <para>The control group path in
the systemd hierarchy, the
systemd session ID (if any),
the systemd unit name (if any)
the systemd hierarchy, the
systemd session ID (if any),
the systemd unit name (if any)
script. This is useful for compatibility with
SysV. Note that this compatibility is quite
comprehensive but not 100%. For details about the
script. This is useful for compatibility with
SysV. Note that this compatibility is quite
comprehensive but not 100%. For details about the
- incomptibilities see the <ulink
+ incomp
atibilities see the <ulink
url="http://www.freedesktop.org/wiki/Software/systemd/Incompatibilities">Incompatibilities
with SysV</ulink> document.
</para>
url="http://www.freedesktop.org/wiki/Software/systemd/Incompatibilities">Incompatibilities
with SysV</ulink> document.
</para>
<para>Behavior of
<option>idle</option> is very similar
to <option>simple</option>, however
<para>Behavior of
<option>idle</option> is very similar
to <option>simple</option>, however
- actual execution of a the service
+ actual execution of the service
binary is delayed until all jobs are
dispatched. This may be used to avoid
interleaving of output of shell
binary is delayed until all jobs are
dispatched. This may be used to avoid
interleaving of output of shell
<listitem><para>Takes a boolean value
that specifies whether systemd should
try to guess the main PID of a service
<listitem><para>Takes a boolean value
that specifies whether systemd should
try to guess the main PID of a service
- should if it cannot be determined
+ if it cannot be determined
reliably. This option is ignored
unless <option>Type=forking</option>
is set and <option>PIDFile=</option>
reliably. This option is ignored
unless <option>Type=forking</option>
is set and <option>PIDFile=</option>
<term><varname>BusName=</varname></term>
<listitem><para>Takes a D-Bus bus
<term><varname>BusName=</varname></term>
<listitem><para>Takes a D-Bus bus
- name, where this service is reachable
+ name, that this service is reachable
as. This option is mandatory for
services where
<varname>Type=</varname> is set to
as. This option is mandatory for
services where
<varname>Type=</varname> is set to
variable substitution is
supported. Use
<literal>${FOO}</literal> as part of a
variable substitution is
supported. Use
<literal>${FOO}</literal> as part of a
- word, or as word of its own on the
+ word, or as a word of its own on the
command line, in which case it will be
replaced by the value of the
environment variable including all
command line, in which case it will be
replaced by the value of the
environment variable including all
0. If set to
<option>on-failure</option> it will be
restarted only when it exited with an
0. If set to
<option>on-failure</option> it will be
restarted only when it exited with an
- exit code not equalling 0, when
+ exit code not equaling 0, when
terminated by a signal (including on
core dump), when an operation (such as
service reload) times out or when the
terminated by a signal (including on
core dump), when an operation (such as
service reload) times out or when the
inspired by Microsoft Windows
<filename>.ini</filename> files.</para>
inspired by Microsoft Windows
<filename>.ini</filename> files.</para>
- <para>This man pages lists the common configuration
+ <para>This man page lists the common configuration
options of all the unit types. These options need to
be configured in the [Unit] or [Install]
sections of the unit files.</para>
options of all the unit types. These options need to
be configured in the [Unit] or [Install]
sections of the unit files.</para>
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for details about these units. The
option prefixed with
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for details about these units. The
option prefixed with
- <literal>rd.</literal> is honoured
+ <literal>rd.</literal> is honored
only in the initial RAM disk (initrd),
while the one that isn't prefixed only
in the main system.</para></listitem>
only in the initial RAM disk (initrd),
while the one that isn't prefixed only
in the main system.</para></listitem>
process and all its children at boot
time. May be used more than once to
set multiple variables. If the equal
process and all its children at boot
time. May be used more than once to
set multiple variables. If the equal
- sign and variable are missing unsets
+ sign and variable are missing it unsets
an environment variable which might be
passed in from the initial ram
disk.</para></listitem>
an environment variable which might be
passed in from the initial ram
disk.</para></listitem>
effect of r or R lines. Lines
of this type accept
shell-style globs in place of
effect of r or R lines. Lines
of this type accept
shell-style globs in place of
names.</para></listitem>
</varlistentry>
names.</para></listitem>
</varlistentry>
extensions are ignored.</para>
<para>Every line in the rules file contains at least one key-value pair.
extensions are ignored.</para>
<para>Every line in the rules file contains at least one key-value pair.
- There are two kind of keys: match and assignment.
+ There are two kinds of keys: match and assignment.
If all match keys are matching against its value, the rule gets applied and the
assignment keys get the specified value assigned.</para>
If all match keys are matching against its value, the rule gets applied and the
assignment keys get the specified value assigned.</para>
<term><option>NAME</option></term>
<listitem>
<para>The name to use for a network interface. The name of a device node
<term><option>NAME</option></term>
<listitem>
<para>The name to use for a network interface. The name of a device node
- can not be changed by udev, only additional symlinks can be created.</para>
+ cannot be changed by udev, only additional symlinks can be created.</para>
</listitem>
</varlistentry>
</listitem>
</varlistentry>
<para>The basic file format of the
<filename>vconsole.conf</filename> is a
<para>The basic file format of the
<filename>vconsole.conf</filename> is a
- newline-separated list environment-like
+ newline-separated list of environment-like
shell-compatible variable assignments. It is possible
to source the configuration from shell scripts,
however, beyond mere variable assignments no shell
shell-compatible variable assignments. It is possible
to source the configuration from shell scripts,
however, beyond mere variable assignments no shell
defaults to <literal>us</literal> if
not set. The
<varname>KEYMAP_TOGGLE=</varname> can
defaults to <literal>us</literal> if
not set. The
<varname>KEYMAP_TOGGLE=</varname> can
- be used to configured a second toggle
+ be used to configure a second toggle
keymap and is by default
unset.</para></listitem>
</varlistentry>
keymap and is by default
unset.</para></listitem>
</varlistentry>
~ianmdlvl / elogind.git / commitdiff