1 Summary of changes from v132 to v133
2 ============================================
5 udevd: de-duplicate strings in rules
6 scsi_id: we don't use DEVPATH env var anymore, update man page
9 volume_id: fat - move check for msdos signature (0x55 0xaa)
12 silence "comparison between signed and unsigned"
13 string index - split nodes and childs to allow and unlimited number of childs
15 merge trie nodes, childs and root into a single array
16 set errno = ENOSYS in inotify stub
17 udevadm: info - unify -V and --version
18 rules: remove DEVTYPE disk/partition
19 rules: remove pnp shell script, acpi loads these modules properly
21 configure: add linux-hotplug mail address
22 remove len == 0 check, the index root is always '\0'
23 volume_id: bump revision
24 volume_id: always check for all filesystem types and skip conflicting results
25 volume_id: fat - accept empty FAT32 fsinfo signature
26 fix spelling in comment
27 volume_id: ntfs - mark as no other fs must match
28 vol_id: clarify error message
29 libudev: device - handle disk "device" link for partitions in deprecated sysfs layout
30 limit $attr(<symlink>) magic to well-known links only
31 udevd: fix cleanup of /dev/.udev/uevent_seqnum
32 fix $links substitution for devices without any link
36 udevadm: fix option parsing breakage with klibc
39 Summary of changes from v131 to v132
40 ============================================
43 fix size_t compiler warning on 32 bit platforms
44 convert debug string arrays to functions
47 Summary of changes from v130 to v131
48 ============================================
51 libudev: fix sysnum logic for digit-only device names
52 udevd: avoid overhead of calling rmdir on non-empty directories
53 use more appropriate alternatives to malloc()
54 libudev: util - optimize path_encode()
55 libudev: allocate udev_device->envp[] dynamically
56 replace strncpy() with strlcpy()
57 use re-entrant variants of getpwnam and getgrnam
58 udevd: fix memory leak
59 udevd: fix WAIT_FOR_SYSFS execution order
60 fix handling of string_escape option
61 udevd: use a tighter loop for compare_devpath()
62 udevd: avoid implicit memset in match_attr()
63 kerneldoc comment fixes
64 udevd: simplify rules execution loop
65 udevd: fix termination of rule execution
66 udevd: be more careful when matching against parents
67 udevd: shrink struct token to 12 bytes
70 remove outdated docs/README-gcov_for_udev
71 libudev: device - add device lookup by subsystem:sysname
72 libudev: also prefix non-exported functions with udev_*
73 libudev: add udev_monitor_send_device()
74 libudev: list - add flag
75 libudev: device - generate DEVNAME and DEVLINKS properties
77 libudev: handle ! in sysname, add sysnum, return allocated list_entry on add
78 delete simple-build-check.sh
79 test: move global ENV{ENV_KEY_TEST}="test" to local rule
80 libudev: monitor - fix send_device() property copying
81 libudev: device - add get_envp() to construct envp from property list
82 libudev: do not include ctrl in libudev.so
83 libudev: monitor - do not mangle DEVLINKS property
84 libudev: update DEVLINKS property when properties are read
85 libudev: device - lookup "subsystem" and "driver" only once
86 libudev: device - export properties when values are set
87 libudev: list - handle update of key with NULL value
88 libudev: ctrl - fix typo in set_env()
89 libudev: add global property list
90 libudev: device - copy global properties, unset empty properties
91 volume_id: btrfs - update magic to latest disk format
93 move udev_device_db to libudev
94 rename udev source files
95 libudev: always add UDEV_LOG
96 libudev: monitor - export MAJOR/MINOR only if available
97 udev-node: name_list -> udev_list
98 udev-rules-parse: name_list -> udev_list
99 delete name_list, move common file functions
100 fix sorting of rules files
101 run_program: prevent empty last argv entry
102 update IMPORT= file/stdout property parsing
103 update rules file parsing
104 delete udev-util-file.c
105 libudev: list - prepend udev_* to all functions
106 libudev: add sysnum to test program
107 test: fix a few unintentially wrongly written rules which cause parse errors
108 libudev: monitor - add set_receive_buffer_size()
109 libudev: ctrl - change magic to integer
110 libudev: make list_node functions available
111 udevd: use udev_list_node
112 collect: use udev_list
114 merge udev-rules.c and udev-rules-parse.c
115 make struct udev_rules opaque
116 move run_program to util
117 udev_event_run() -> udev_event_execute_rules()
118 udev_rules_run() -> udev_event_execute_run();
119 move udev_rules_apply_format() to udev-event.c
120 udev_list_cleanup() -> udev_list_cleanup_entries()
121 selinux_init(udev) -> udev_selinux_init(udev)
122 prefix udev-util.c functions with util_*
124 libudev: device - get_attr_value() -> get_sysattr_value()
125 cdrom_id: remove ARRAY_SIZE() declaration
126 replace missing get_attr_value() -> get_sysattr_value()
127 add "root" == 0 shortcuts to lookup_user/group()
128 do not use the new work-in-progress parser rule matcher
129 libudev: device - 128 -> ENVP_SIZE
130 add util_resolve_subsys_kernel()
131 handle numerical owner/group string in lookup_user/group()
132 replace in-memory rules array with match/action token list
133 do not create temporary node ($tempnode) if node already exists
134 shrink struct udev_event
135 shrink struct udev_event
136 rule_generator: fix netif NAME= value extraction regex
137 skip SYMLINK rules for devices without a device node
138 rules: let empty strings added to buffer always return offset 0
139 fix uninitialized variable warnings
140 cache uid/gid during rule parsing
141 distinguish "match" from "assign" by (op < OP_MATCH_MAX)
142 determine at rule parse time if we need to call fnmatch()
143 special-case "?*" match to skip fnmatch()
144 libudev: monitor - replace far too expensive snprintf() with strlcpy()
145 libudev: monitor - cache result of monitor send buffer
146 fix "unused" warnings
148 match KEY="A|B" without temporary string copy
149 match_attr() - copy attr value only when needed
150 do not init string arrays, just clear first byte
151 fix $attr{[<subsystem>/<sysname>]<attribute>} substitution
152 libudev: device - fill envp array while composing monitor buffer
153 test: add RUN+="socket: ..." to a test to run monitor code
154 libudev: device - allocate envp array only once
156 udevd: merge exec and run queue to minimize devpath string compares
157 ATTR{}== always fails if the attribute does not exist
158 rules: remove SCSI timeouts
159 rules: remove "add" match from usb device node rule
160 edd_id: add "change" event match
161 fstab_import: add "change" event match
162 write trace log to stderr
163 log rules file and line number when NAME, SYMLINK, OWNER, GROUP, MODE, RUN is applied
164 skip entire rule containing device naming keys, if no device can be named
165 fix udev_node_update_old_links() logic
166 move some info() to dbg()
167 add "devel" and "install" switches to autogen.sh
168 move debugging strings inside #ifdef DEBUG
169 firmware.sh: record missing files in /dev/.udev/firmware-missing/
170 fix list handling in enumerate and rules file sorting
171 volume_id: btrfs update
172 info() PROGRAM and IMPORT execution
173 fix $links substitution
174 fix cleanup of possible left-over symlinks
175 do not import the "uevent" file when we only read the db to get old symlinks
176 usb_id: MassStorage SubClass 6 is "scsi" not "disk"
177 unify string replacement
178 $links should be relative
180 rules: md - add mdadm 3 device naming
181 cleanup /dev/.udev/queue on startup and exit
182 udevadm: settle - exit if udevd exits
185 volume_id: swap - larger PAGE_SIZE support
187 Steven Whitehouse (1):
188 volume_id: support for GFS2 UUIDs
191 Summary of changes from v129 to v130
192 ============================================
195 fix compile error with --disable-logging
196 libudev: enumerate - add_device() -> add_syspath()
197 volume_id: hpfs - read label and uuid
198 use no_argument, required_argument, optional_argument in longopts
199 libudev: get rid of selinux
200 libudev: device - add get_parent_with_subsystem()
202 udevadm: info - fix --query=all for devices without a device node
203 vol_id: add size= option
204 move selinux noops to udev.h
205 volume_id: add dbg() as noop to check for compile errors
206 vol_id: fix logging glue
207 vol_id: always use the safe string versions for unencoded label and uuid
208 volume_id: better DDF raid detection
210 volume_id: use PRIu64i, PRIx64 macros
211 udevd: clarify deprecated sysfs layout warning
212 libudev: fix --enable-debug
213 don not print error if GOTO jumps just to next rule
214 volume_id: add more vfat debugging information
215 libudev: libudev.pc remove selinux
216 store node name and symlinks into db symlink target if they are small enough
217 volume_id: more fat debugging
218 libudev: fix typo in "multiple entries in symlink" handling
219 connect /sys and /dev with /sys/dev/{block,char}/<maj>:<min> and /dev/{block,char}/<maj>:<min>
220 replace spaces in dm and md name symlinks
223 Summary of changes from v128 to v129
224 ============================================
227 udev-test.pl: set non-zero exitcode if tests fail
228 scsi_id: compiler warning on 32-bit
229 trivial cleanup in udev_rules_iter
230 avoid repeated scans for goto targets (udev_iter_find_label)
231 replace strerror() usage with threadsafe "%m" format string
232 fix messages (inc. debug compile failure) introduced when optimizing "goto"
233 allow compiler to check dbg() arguments on non-debug builds
236 libudev: switch to "udev_device_get_parent"
237 libudev: udev_device - add attribute cache
238 libudev: handle "device" link as parent, handle "class" "block" as "subsystem"
239 udevadm: info - fix lookup-by-name
240 libudev: switch API from devpath to syspath
241 libudev: rename ctrl_msg to ctrl_msg_wire
242 vol_id: fix lib logging glue
243 fix broken symlink resolving
245 libudev: pass udev_device in enumerate
246 libudev: fix "subsystem" value
247 always include config.h from Makefile
248 libudev: udev_device_get_devname -> udev_device_get_devnode
249 libudev: add udev_device_new_from_devnum()
250 libudev: also import "uevent" file when reading udev database
251 libudev: add userdata pointer
252 libudev: replace awkward callback list interfaces with list iterators
253 libudev: get devnum from uevent file
254 libudev: enumerate_get_devices_list -> enumerate_get_list
255 libudev: initialize selinux only when needed
256 libudev: device - read database only when needed
257 libudev: rework list handling
258 libudev: more list rework
259 lubudev: accept more sys directories as devices, and parent devices
260 libudev: enumerate - accept list of subsystems to scan, or skip
261 libudev: enumerate "subsystem"
262 libudev: enumerate - scan /sys/block/ if needed
263 libudev: enumerate - split new() and scan()
264 test: replace ancient sysfs tree with recent one
265 test: add missing pci directory because of .gitignore *.7
266 gitignore: move *.8 to subdirs
267 test: replace last reference of "/class/*" devpath
269 libudev: enumerate - scan devices and subsystems, add subsystem and attribute filter
270 udevadm: trigger: use libudev
271 fix segfault caused by wrong pointer used in dbg()
272 libudev: device_init() -> device_new()
273 udevadm: trigger fix long option --type=
274 libudev: add queue interface
275 udevadm: settle - use libudev queue
276 libudev: device - handle /sys/block/<disk-device-link>/<partition>
277 libudev: enumerate - ignore regular files while scanning
278 udevadm: trigger --type=failed - use libudev queue
279 rules: ieee1394 - create both, by-id/scsi-* and by-id/ieee-* links
280 build: include Makefile.am.inc in all Makefile.am
281 udevd: print warning if CONFIG_SYSFS_DEPRECATED is used
284 Summary of changes from v127 to v128
285 ============================================
288 fix uninitialized name_list error::ignore_error
289 do not needlessly declare some local variables in udev_rules_parse.c as static
290 remove deprecated envp[] in main()
291 fix name compare bug name_list_key_add()
292 remove redundant string copy in udev_rules_apply_format()
293 remove redundant "remove trailing newlines" in udevadm info
294 threadsafe rules iteration
295 fix off-by-one in pass_env_to_socket()
298 libudev: add monitor documentation
299 libudev: fix --disable-log
300 autogen.sh: add --with-selinux
301 volume_id: hfs - calculate proper uuid
302 fix dangling pointer returned by attr_get_by_subsys_id()
303 udev-test.pl: add --valgrind option
304 libudev: libudev.pc add Libs.private
305 volume_id: fail on undefined __BYTE_ORDER
307 libudev: fix monitor documentation
308 libudev: add udev_device_get_syspath()
309 udev_device_init() remove statically allocated device support
310 udevadm: info - fix broken --device-id-of-file=
311 udevadm: control - use getopt_long()
312 udevadm: print warning to stderr if udevadm is called by symlink
313 udev-test.pl: remove left-over comment from --valgrind option
314 udevadm: rename source files
315 udevadm: rename internal functions to udevadm_*
316 udevadm: split out control functions
317 udevadm: move init from commands to udevadm
318 autogen.sh: add debug
319 use libudev code, unify logging, pass udev context around everywhere
320 volume_id: linux_raid - fix logic for volumes with size == 0
321 vol_id: add --debug option
322 udevadm: add --version --help options to man page, hide them as commands
323 move udev_ctrl to libudev-private
324 udev-test.pl: set udev_log="err"
325 test-udev: cleanup libudev context and overridden rules file string
326 test-udev: remove unused var
327 add a bunch of private device properties to udev_device
328 udevadm: monitor - use libudev for udev monitor
329 libudev: monitor - add event properties to udev_device
330 udevadm: log message if udevadm link is used
331 udevd: remove max_childs_running logic
332 libudev: monitor- add netlink uevent support
333 udevadm: monitor - use libudev code to retrieve device data
334 libudev: udev_device - read "driver" value
335 libudev: rename enumerate function
337 libudev: initialize selinux after logging
338 volume_id: merge util.h in libvolume_id-private.h
340 libudev: udev_device - add more properties
341 libudev: do not use udev_db.c
342 libudev: get rid of udev_sysfs.c
343 libudev: get rid of udev_utils.c
344 libudev: rename libudev-utils.c libudev-util.c
345 libudev: do not use any udev source file
346 extras: use libudev code
347 convert to libudev and delete udev_utils_string.c
348 get rid of udev_sysdeps.c
349 use size definitions from libudev
350 udevadm: info - use "udev_device"
353 Summary of changes from v126 to v127
354 ============================================
357 build-sys: don't duplicate file names
358 build-sys: remove non-POSIX variable names
361 add inotify dummy definitions if inotify is not available
362 build: remove autopoint check
363 udevadm: trigger - add missing attr filter to synthesized "subsystem" register events
364 ignore duplicated rules file names
366 rules: delete all distro rules which do not use default rules
368 rules: add isdn rules
373 add missing 'v' for "make changelog"
374 build: fix "make dist"
375 vol_id: make the --offset= argument optional
376 rules: optical drives - probe at last session offset, do not probe for raid
377 libudev: add library to access udev information
378 libudev: split source files
380 libudev: add udev event monitor API
381 volume_id: remove deprecated functions and bump major version
382 volume_id: remove left-over fd close()
383 split udev_device.c to leave out rules handling from libudev
384 libudev: link against selinux if needed
385 firmware.sh: lookup lookup kernel provided firmware directory
386 libudev: require LIBUDEV_I_KNOW_THE_API_IS_SUBJECT_TO_CHANGE
389 rules: fix md rules for partitioned devices
392 Summary of changes from v125 to v126
393 ============================================
396 delete all Makefiles and move udev source to udev/
398 rules: mode 0660 for group "disk"
399 rules: update Fedora rules
401 INSTALL: --enable-selinux not --with-selinux
402 volume_id: move static lib to $prefix
403 volume_id: create relative links
404 rules: run vol_id on opticals only if media is found
410 use proper directory lib/lib64 for libvolume_id
413 Summary of changes from v124 to v125
414 ============================================
417 rules: tape rules - add nst to usb and 1394 links
420 man: clarify $attr{} parent searching
423 collect: fix size_t printf
424 path_id: suppress trailing '-' like 'ID_PATH=pci-0000:05:01.0-'
425 rules: add v4l persistent links
426 docs: update some docs and delete outdated stuff
427 scsi_id: fix fallback to sg v3 for sg nodes
428 rules: fix cciss rules for partition numbers > 9
429 udev.conf: udevcontrol -> udevadm control
430 rules: use consistently OPTIONS+=
431 scsi_id: the fallback fix broke error handling
432 man: rebuild from xml
433 do not touch node ownership and permissions, if already correct
434 rules: tape rules - add nst to by-path/ links
435 udevadm: info - add --export format to --device-id-of-file=
436 move default rules from /etc/udev/rules.d/ to /lib/udev/rules.d/
439 rules_generator: net rules - do not print error if file is missing and ignore commented rules
440 man: add link_priority default value
441 scsi_id: man page fix
442 udevadm: settle - add verbose output when running into timeout
445 ignore rule with GOTO to a non-existent label
448 scsi_id: include sys/stat.h
451 collect: check realloc return value
454 Summary of changes from v123 to v124
455 ============================================
458 cdrom_id: fix recognition of blank media
461 Summary of changes from v122 to v123
462 ============================================
464 Erik van Konijnenburg (3):
465 add substitution in MODE= field
466 Makefile: use udevdir in "make install"
467 volume_id: support for oracleasm
470 scsi_id: retry open() on -EBUSY
473 volume_id: remove unnecessary global variable
474 volume_id: enable GFS probing code, add LABEL support
477 edd_id: call it only for sd* and hd*
478 rename WAIT_FOR_SYSFS to WAIT_FOR and accept an absolute path
479 rules: tape rules - use bsg device nodes for SG_IO
480 rules: persistent net - handle "locally administered" ibmveth MAC addresses
481 cdrom_id: export ID_CDROM_MEDIA_TRACK_COUNT_AUDIO=, ID_CDROM_MEDIA_TRACK_COUNT_DATA=
484 man: add NAME== match entry
487 collect: realloc buffer, if needed
488 udevd: export .udev/queue/$seqnum before .udev/uevent_seqnum
491 Summary of changes from v121 to v122
492 ============================================
495 scsi_id: remove all sysfs dependencies
496 scsi_id: add SGv4 support
499 volume_id: clean up linux_raid code
502 scsi_id: update man page
503 scsi_id: remove bus_id option
504 scsi_id: add --sg-version= option
505 rules: adapt to new scsi_id
506 rules: adapt tape rules to new scsi_id
508 volume_id: bump version
509 Makefile: do not create udevcontrol, udevtrigger symlinks
512 man: udevd- fix udev(8) reference
515 Matthias Schwarzott (1):
516 cdrom_id: fix segfault
519 Summary of changes from v120 to v121
520 ============================================
522 Damjan Georgievski (1):
523 libvolume_id: recognize swap partitions with a tuxonice hibernate image
526 writing udev rules: fix rule typos
529 rules_generator: net rules - add "dev_id" value to generated rules
532 selinux: more context settings
535 udevinfo: do not replace chars when printing ATTR== matches
536 vol_id: add --offset option
537 cdrom_id: replace with version which also exports media properties
538 udevd: at startup write message including version number to kernel log
539 rules_generator: net rules - always add KERNEL== match to generated rules
540 selinux: fix missing includes
541 allow setting of MODE="0000"
542 path_id: remove subsystem whitelist
543 logging: add trailing newline to all strings
544 scsi_id: initialize serial strings
545 persistent device naming: also read unpartitioned media
546 cdrom_id: add more help text
547 add $links substitution
548 fstab_import: add program to IMPORT matching fstab entry
549 add OPTIONS+="event_timeout=<seconds>"
550 write "event_timeout" to db
551 udevadm: trigger - add --env= option
552 udevadm: control - fix --env key to accept --env=<KEY>=<value>
553 udevadm: info - do not print ATTR{dev}==
554 persistent device naming: update tape rules
555 rules: update md rules
558 Summary of changes from v119 to v120
559 ============================================
562 test: remove duplicated EXTRA entry
563 rules: remove last WAIT_FOR_SYSFS, load ppdev, switch scsi_device
564 udevadm: trigger - option to synthesize events and pass them to a socket
565 udevadm: info - resolve devpath if symlink is given
566 udevadm: remove old man page links and compat links for debugging tools
567 udevadm: trigger - fix broken socket option check
568 udevadm: trigger - fix --socket== + --verbose
569 also accept real socket files for RUN+="socket:<path>"
570 persistent device naming: cleanup storage rules
573 udevd: serialize events if they refer to the same major:minor number
576 Summary of changes from v118 to v119
577 ============================================
579 Anthony L. Awtrey (1):
580 do not skip RUN execution if device node removal fails
584 rules: do not set GROUP="disk" for scanners
587 rules_generator: add missing write_net_rules unlock
590 volume_id: fix UUID raw buffer usage
591 volume_id: fix typo in function documentation
594 switch mailing lists to linux-hotplug@vger.kernel.org
595 rules: remove tty rule which can never run because of an earlier "last_rule"
596 volume_id: update ext detection
597 selinux: set context for real file name not the temp name
598 hack to allow ATTR{block/*/uevent}="change"
599 rules_generator: add KERNEL=="<netifname>*" to generated rules
600 persistent device naming: also run on "change" event
601 test: add "subsystem" links to all devices
602 sysfs: depend on "subsystem" link
603 extend hack to allow TEST=="*/start"
605 Matthias Schwarzott (1):
606 volume_id: respect LDFLAGS
609 volume_id: add prefix=, exec_prefix=
612 Makefile: do not require GNU install
615 Summary of changes from v117 to v118
616 ============================================
619 doc: update "writing udev rules"
622 volume_id: LVM - add uuid
626 rules_generator: do not create rules with insufficient matches
627 man: udevadm settle - mention 180 seconds default timeout
628 libvolume_id: squashfs - add endianess support for LZMA compression
630 volume_id: md - add metadata minor version
631 volume_id: run only once into a timeout for unreadable devices
632 create_floppy_devices: fix logic for more than one floppy device
633 volume_id: also add readable check to probe_all()
635 Matthias Schwarzott (1):
639 libvolume_id: squashfs+LZMA compression detection
642 Summary of changes from v116 to v117
643 ============================================
646 extras: ignore built and generated files
647 volume_id: create relative symlink when $(libdir) = $(usrlibdir)
650 usb_id: fail if vendor/product can not be retrieved
652 firmware: do not print error if logger is missing
653 volume_id: vfat - allow all possible sector sizes
654 volume_id: LUKS - export version
655 volume_id: ntfs - rely on valid master file table
656 volume_id: bump version
657 udevinfo: exclude "uevent" file from --attribute-walk
658 udevadm: merge all udev tools into a single binary
659 udevadm: accept command as option, like --help, --version
660 udevadm: add info option --device-id-of-file=<file>
661 Makefile: fix bogus version number than got committed
662 udevadm: also return major==0 results for --device-id-of-file
663 man: udevd.8 - remove udevcontrol section
664 udevadm: control - allow command to be passed as option
667 man: fix udevadm.8 typo
669 Matthias Schwarzott (2):
670 firmware: remove hardcoded path to logger
674 rules: Frugalware update
677 Summary of changes from v115 to v116
678 ============================================
684 check line length after comment check and whitespace strip
686 remove extra space from udevinfo symlink output
689 rules: fix two trivial typos
690 rules: random and urandom are 0666
691 rules: add REMOVE_CMD rule
692 track "move" events to rename database and failed files
694 rules: add i2o driver rule
695 man: recreate man pages
696 volume_id: fix linux_raid metadata version 1.0 detection
697 add $name substitution
698 do not delete the device node with ignore_remove, but handle the event
699 print warning for invalid TEST operations
700 rules: do not delete /lib/udev/devices/ nodes on "remove"
701 rules: remove broken nvram group assignment without any permission
702 add /dev/rtc symlink if new rtc drivers are used
703 increase WAIT_FOR_SYSFS timeout to 10 seconds
704 rules: put bsd nodes in /dev/bsd/ directory
705 path_id: fix for stacked class devices
706 ignore device node names while restoring symlinks from the stack
707 use SEQNUM in /dev/.udev/queue/ instead of devpath
708 rules: add memstick module loading
709 udevinfo: simplify symlink printing logic
710 prevent wrong symlink creation if database disagress with current rules
711 fix wrong variable used in logged string
713 rule_generator: move all policy from write_net_rules to the rules file
714 rules: call usb_id only for SUBSYSTEMS=="usb"
715 rules: split out and fix persistent tape rules
716 fix debug output string
717 rule_generator: always match netif type in generated rule
719 Matthias Schwarzott (3):
725 set buffer size if strlcpy/strlcat indicate truncation
727 maximilian attems (1):
728 correct includes in udev_selinux.c
731 Summary of changes from v114 to v115
732 ============================================
735 rules: fix typo in 80-drivers.rules
738 rules: add default rules
739 rules: update SUSE rules
740 rules: add packages rules
741 rules: add ia64 rules
742 rules: move md-raid rules to packages dir
743 rules: run vol_id only for partitions
744 rules: update Fedora rules
745 edd_id: move persistent rules to its own file
746 accept relative path for TEST
747 rules: add iowarrior rule
748 volume_id: fix sqashfs detection
749 do not ignore dynamic rule if it is the last one in the list
750 rule_generator: fix wrong DRIVERS!= logic
752 Makefile: install default rules
755 rules_generator: remove policy from write_cd_rules
756 rules_generator: fix write_cd_rules when similar names exist in the root directory
760 Summary of changes from v113 to v114
761 ============================================
764 collect: extra to synchronize actions across events
765 add $driver subtitution
766 rules_generator: add S/390 persistent network support
769 rules_generator: remove executable flag from include file
770 always unlink temporary file before creating new one
772 volume_id: ext4 detection
773 udevtrigger: allow to specify action string
774 add option to RUN key to ignore the return value of the program
775 use global udev_log variable instead of parameter in run_program
776 add udev_rules_run() to handle RUN list
777 move udev_utils_run.c into udev_rules.c
779 name_list: rename loop_name -> name_loop
780 handle dynamic rules created in /dev/.udev/rules.d/
781 allow SYMLINK== match
782 libvolume_id: use /usr/$libdir in pc file
783 Makefile: add --as-needed flag to ld
784 restore behavior of NAME==
785 rules_generator: remove "installation" function
786 udevtrigger: trigger "driver" events
789 rules: add "do not edit" comment
791 rules_generator: skip random MAC addresses
792 write changed network interface names to the kernel log
794 Matthias Schwarzott (3):
796 fix inotify to work not only once
800 Makefile: add "make dist" for nightly snapshots
803 Summary of changes from v112 to v113
804 ============================================
807 vol_id: do not fail if unable to drop privileges
810 add missing ChangeLog
811 make ATTR{[$SUBSYSTEM/$KERNEL]<attr>}="<value>" working
812 rules: recognize partitions and disk devices properly
814 atomically replace existing nodes and symlinks
815 do not try to create existing file
816 info() for ignore_remove
818 Makefile: check for missing ChangeLog or RELEASE-NOTES at release
819 allow to disable the replacement of unusual characters
820 no newline in log messages
821 udevd: do not use syslog if --verbose (debugging) is used
824 fix typo in udev_utils_run.c
827 Summary of changes from v111 to v112
828 ============================================
830 Fabio Massimo Di Nitto (1):
831 rules: ignore partitons that span the entire disk
837 udevd: close /proc/meminfo after reading
838 create_floppy_devices: remove dead "unlink" code
839 volume_id: add function documentation
840 udev_db: escape path names with \x00 instead of %00
841 udevsettle: use long options
842 replace_chars: replace spaces in node name
843 volume_id: add and export string encoding function
844 vol_id: export encoded strings
845 rules: use encoded strings instead of skipping characters
846 udevtest: print message before log output
847 volume_id: escape % character
848 replace_chars: replace % character
849 IMPORT: do not mangle whitespace
850 scsi_id: do not install symlink in /sbin
852 volume_id: terminate overlong label strings
853 scsi_id: add long options
854 rules: use long options for scsi_id
855 path_id: skip subsystem directory
856 rules: fix cciss rule
858 scsi_id: fix typo in help text
859 fix "do not access parent" warning for ATTR{}
860 sysfs: add device lookup by $SUBSYSYTEM:$KERNEL
861 events for "bus" and "class" registration must be matched as "subsystem"
862 udevtest: add --subsystem option
863 sysfs: change order of subsystem lookup
864 add $sys substitution
865 add TEST=="<file>" key
866 add "[$SUBSYSTEM/$KERNEL]<attribute>" lookup
867 sysfs: handle bus/class top-level directories
868 sysfs: skip unknown sysfs directories
873 create_floppy_devices: add man page
874 path_id: remove on make uninstall
877 volume_id: support for long-filename based labels
879 Scott James Remnant (2):
880 replace_untrusted_chars: replace all whitespace with space
881 run_program: log "info" not "error" if program is missing
884 Summary of changes from v110 to v111
885 ============================================
890 volume_id: use md native uuid format
891 vol_id: use long options
892 volume_id: add volume_id_get_* functions
893 vol_id: use volume_id_get_*
894 udevd: use fgets() to read /proc files
895 volume_id: add internal UUID_STRING
896 volume_id: add DDF support
897 vol_id: README update
898 volume_id: rename UUID_64BIT_LE/BE
899 vol_id: add ID_FS_UUID_SAFE
900 rules: use ID_FS_UUID_SAFE
902 volume_id: give access to list of all available probers
903 vol_id: use libvolume_id prober list for --probe-all
904 volume_id: add remaining names for prober lookup by type
906 volume_id: vol_id depends on libvolume_id
908 Matthias Schwarzott (2):
909 volume_id: fix Makefile for parallel make
913 Summary of changes from v109 to v110
914 ============================================
917 udevcontrol: allow to set global variables in udevd
920 remove eventrecorder.sh
922 volume_id: add md metadata 1.0, 1.1, 1.2 support
923 unset variable with ENV{VAR}=""
924 delete copies of default rules in SUSE rules
925 volume_id: ext - fix endianess in version number
927 volume_id: old md metadata has only 32 bit for the uuid
928 volume_id: minix version 3 support
929 don't create $tempnode for devices without major
930 usb_id: add <devpath> to help text
931 ata_id: use getopt_long()
934 Matthias Schwarzott (3):
935 Makefile: respect CFLAGS/LDFLAGS
937 ata_id: don't log error for libata devices on older kernels
940 Summary of changes from v108 to v109
941 ============================================
944 create_floppy_devices: create nodes with correct selinux context
947 udevtest: export ACTION string if given as option
949 make ACTION!="add|change" working
950 udevtest: import uevent variables if possible
951 udevinfo: export all information stored in database
952 default rules: add libata compat links
953 create_path: don't fail if something else created the directory
954 udevd: fix serialization of events
955 path_id: remove broken example
956 libvolume_id: do not install static library
959 Matthias Schwarzott (2):
961 persistent device naming: add joystick links
964 path_id: add man page
967 Summary of changes from v107 to v108
968 ============================================
971 udevinfo: relax check for the correct device if looked up by name
972 don't write to sysfs files during test run
973 finally remove the directory event-multiplexer crap
975 Matthias Schwarzott (2):
976 write_cd_rules: set default link type to "by-id" for usb and ieee1394 devices
980 udevsettle: read udev not kernel seqnum first
983 Summary of changes from v106 to v107
984 ============================================
987 udevtest: export UDEV_LOG if we changed it
990 man: add missing options to various man pages
992 create_floppy_devices: apply specified mode without umask
994 udevmonitor: add switch for kernel and udev events
995 default rules: wait for 0:0:0:0 scsi devices only
997 delete dasd_id, it moved to s390-tools
999 encode db-file names, instead of just replacing '/'
1000 update internal variables if we see $DEVPATH during IMPORT
1001 increase /proc/stat buffer
1002 maintain index over device-names to devpath relation
1003 restore overwritten symlinks when the device goes away
1004 store devpath with the usual leading slash
1005 add link_priority to rule options, and store it in database
1006 pick actual valid device in udev_db_lookup_name
1007 cleanup already existing db-entries and db-index on device update
1008 selinux: move selinux_exit() to the main programs
1009 remove old error message
1010 read list of devices from index, make index private to database
1011 priority based symlink handling
1012 volume_id: get rid of compiler warning
1013 udevinfo: remove -d option
1014 update %n on netif name change
1015 if a node goes away, possibly restore a waiting symlink
1017 man: add "link_priority" option
1019 udevtest: add --force mode
1020 udevinfo: print link priority
1021 usb_id: append target:lun to storage device serial
1022 run_directory: add final warning before removal
1027 Matthias Schwarzott (2):
1028 udevd: cleanup std{in,our,err} on startup
1029 udevmonitor: fix swapped event switch descriptions
1032 Summary of changes from v105 to v106
1033 ============================================
1036 man: fix typos in scsi_id and udevd
1038 Andrey Borzenkov (2):
1039 vol_id: add -L to print raw partition label
1043 persistent device naming: tape devices and medium changers
1046 exclude parent devices from DRIVER== match
1047 volume_id: really fix endianess bug in linux_raid detection
1049 man: correct udevinfo --export-db
1050 path_id: append LUN to iSCSI path
1051 create_floppy_devices: add option for owner/group
1052 update example rules
1053 apply format chars to ATTR before writing to sysfs
1054 add (subsystem) to udevmonitor output
1055 update DRIVER== changes
1056 remove --version from the udevinfo man page
1057 add test for an attribute which contains an operator char
1058 man: add note about parent matching behavior
1059 scsi_id: accept tabs in /etc/scsi_id.conf
1060 remove dead rule in persistent tape rules
1062 Matthias Schwarzott (4):
1063 correct typo in extras/scsi_id/scsi_id.conf
1064 fix retry-loop in netif-rename code
1065 add option --version to udevd
1066 rule_generator: fix for creating rules on read-only filesystem
1068 Peter Breitenlohner (1):
1069 fix INSTALL_PROGRAM vs. INSTALL_SCRIPT
1072 udevd: init signal pipe before daemonizing
1073 unlink old database file before creating a new one
1074 fix %c $string substitution
1076 Theodoros V. Kalamatianos (1):
1077 fix udev attribute names with a colon
1080 Summary of changes from v104 to v105
1081 ============================================
1084 man: fix typos in scsi_id and udevd
1086 Andrey Borzenkov (2):
1087 vol_id: add -L to print raw partition label
1091 exclude parent devices from DRIVER== match
1092 volume_id: really fix endianess bug in linux_raid detection
1094 Matthias Schwarzott (2):
1095 correct typo in extras/scsi_id/scsi_id.conf
1096 fix retry-loop in netif-rename code
1098 Peter Breitenlohner (1):
1099 fix INSTALL_PROGRAM vs. INSTALL_SCRIPT
1102 udevd: init signal pipe before daemonizing
1103 unlink old database file before creating a new one
1104 fix %c $string substitution
1107 Summary of changes from v103 to v104
1108 ============================================
1112 update example rules
1115 volume_id: fix endianess bug in linux_raid detection
1116 man: fix udevmonitor text
1117 man: recreate from xml
1118 rename config "filename" to "dir"
1119 remove outdated documentation
1120 rename "udev.c" to "test-udev.c" - it is only for testing
1122 use git-archive instead of git-tar-tree
1124 Kazuhiro Inaoka (1):
1125 inotify syscall definitions for M32R
1128 write_cd_rules: identity-based persistence
1129 scsi_id: remove trailing garbage from ID_SERIAL_SHORT
1132 SELinux: label created symlink instead of node
1135 Summary of changes from v102 to v103
1136 ============================================
1139 persistent storage rules: skip gnbd devices
1140 volume_id: add checksum check to via_raid
1141 volume_id: add comment about hfs uuid conversion
1146 Summary of changes from v101 to v102
1147 ============================================
1150 writing_udev_rules: fix typo in example rule
1153 create missing ChangeLog for version 101
1155 update default rules
1156 first try "subsystem" link at a parent device, before guessing
1157 if /sys/subsystem exists, skip class, bus, block scanning
1158 scsi_id: export ID_SERIAL_SHORT without vendor/product
1162 path_id: fix SAS disk handling
1165 Summary of changes from v100 to v101
1166 ============================================
1169 fix udevinfo help text typo
1172 cleanup default rules
1173 add IMPORT operations to the udev man page
1176 remove Makefile magic for leading '0' in version
1177 udevd: use getopt_long()
1178 udevd: add --verbose option to log also to stdout
1179 udevd: add --debug-trace option
1180 rule_generator: improve net rule comment generation
1181 volume_id: correct iso9660 high sierra header
1182 warn if a PHYSEDV* key, the "device" link, or a parent attribute is used
1183 don't print PHYSDEV* warnings for old WAIT_FOR_SYSFS rules
1184 udevinfo: print error in --attribute-walk
1185 udev_sysfs: unify symlink resolving
1186 udevtrigger: trigger devices sorted by their dependency
1187 fix spelling in deprecation warning
1190 Michał Bartoszkiewicz:
1191 udevtrigger: fix typo that prevents partition events
1194 clarify "specified user/group unknown" error
1197 update slackware rules
1200 update Frugalware rules
1203 Summary of changes from v099 to v100
1204 ============================================
1208 fix messed up ChangeLog from release 099
1209 man: add $attr{} section about symlinks
1210 revert persistent-storage ata-serial '_' '-' replacement
1213 Summary of changes from v098 to v099
1214 ============================================
1220 udev_db.c: include <sys/stat.h>
1221 use fnmatch() instead of our own pattern match code
1222 rename major/minor variable to maj/min to avoid warning
1223 update source file headers
1224 udevtest: print header that ENV{} can't work
1226 udevtrigger: options to filter by subsystem and sysfs attribute
1227 udevtrigger: remove unused longindex
1228 udevinfo: use long options
1229 udevd: use files instead of symlinks for /dev/.udev/queue,failed
1230 udevtrigger: fix pattern match
1231 reorder options in udevinfo man page
1232 udevinfo: fix SUBSYTEMS spelling error
1233 fix ENV{TEST}="Test: $env{TEST}"
1234 let $attr{symlink} return the last element of the path
1235 cdrom_id: add rules file to call cdrom_id
1236 udevinfo: do not show symlinks as attributes in --attribute-walk
1237 remove broken name_cdrom.pl
1241 run_program: close pipe fd's which are connected to child process
1242 add persistent rules generator for net devices and optical drives
1245 changes rules for ata disk from '_' to '-'
1248 make struct option arrays static const
1252 Summary of changes from v097 to v098
1253 ============================================
1256 udevtest: allow /sys in the devpath paramter
1259 selinux: init once in the daemon, not in every event process
1262 udevd: remove huge socket buffer on the control socket
1264 rename udev_libc_wrapper -> udev_sysdeps
1265 db: store devpath - node relationship for all devices
1266 udevinfo: allow -a -n <node>
1267 udevinfo, udevtest: simplify '/sys' stripping from devpath argument
1268 lookup_user, lookup_group: report "unknown user" and "lookup failed"
1269 consistent key naming to match only the event device or include all parent devices
1270 skip rule, if too may keys of the same type are used
1271 introduce ATTR{file}="value" to set sysfs attributes
1273 update default rules
1274 export DRIVER for older kernels as a replacement for PHYSDEVDRIVER
1275 fix typo in SUBSYSTEMS key parsing
1276 udevtrigger: add --retry-failed
1277 volume_id: add suspend partition detection
1278 vol_id: use primary group of 'nobody' instead of 'nogroup'
1279 remove built-in /etc/passwd /etc/group parser
1280 always expect KEY{value} on ATTR, ATTRS, ENV keys
1281 use new key names in test programs
1282 cleanup commandline argument handling
1283 db: don't create a db file for only a node name to store
1284 man: add ATTR{file}="value" assignment
1287 volume_id: fix fat32 cluster chain traversal
1290 fix 'unknow user' error from getpwnam/getgrnam
1291 fix rc when using udev --daemon
1294 Michał Bartoszkiewicz:
1295 man pages: fix typos
1298 Summary of changes from v096 to v097
1299 ============================================
1302 add joystick support to persistent input rules
1305 firmware.sh: remove needless '/'
1306 vol_id: add --skip-raid and --probe-all option
1307 switch uevent netlink socket to group 1 only
1308 increase /proc/stat read buffer
1309 use "change" instead of "online" events
1310 remove 'static' from local variable
1311 libvolume_id: add parameter 'size' to all probe functions
1312 man pages: replace 'device-path' by 'devpath'
1313 man pages: work around xmlto which tries to be smart
1314 refresh vol_id man page
1315 udevinfo: add DRIVER==
1316 Makefile: fix dependency
1317 libvolume_id: read ufs2 label
1318 switch ifdef __KLIBC__ to ifndef __GLIBC__
1319 report failing getpwnam/getgrnam as error
1320 rename udevcontrol message types and variables
1321 initialize unused sockets to -1
1322 udevd: remove useless udevinitsend parameter
1324 udevd: autotune max_childs/max_childs_running
1325 update frugalware rules
1327 move default rules to etc/udev/rules.d/
1328 add 'crypto' devices to persistent storage rules
1329 add late.rules to default rules
1331 don't report an error on overlong comment lines
1333 udevd: read DRIVER from the environment
1336 make rename_netif() error messages useful
1337 path_id: fix an harmless syntax error
1340 update slackware rules
1343 Fix inotify syscalls on ARM
1346 Summary of changes from v095 to v096
1347 ============================================
1350 Makefiles: fix .PHONY for man page target
1351 allow longer devpath values
1352 path_id: prepare for new sysfs layout
1355 Summary of changes from v094 to v095
1356 ============================================
1360 don't remove symlinks if they are already there
1361 allow "online" events to create/update symlinks
1362 udevinfo: clarify parent device attribute use
1364 netif rename: optimistic loop for the name to become free
1365 remove broken %e enumeration
1368 print usage of udevcontrol when no or invalid command is given
1371 Summary of changes from v093 to v094
1372 ============================================
1375 update "writing udev rules"
1378 libvolume_id: gfs + gfs2 support
1379 remove MODALIAS key and substitution
1380 add persistent-input.rules
1386 Summary of changes from v092 to v093
1387 ============================================
1390 path_id: add support for iSCSI devices
1393 libvolume_id: fat - check for signature at end of sector
1394 libvolume_id: add more software raid signatures
1396 path_id: prevent endless loop for SAS devices on older kernels
1398 replace binary firmware helper with shell script
1399 skip device mapper devices for persistent links
1402 Summary of changes from v091 to v092
1403 ============================================
1406 don't include stropts.h, some libc's don't like it
1407 udevd: create leading directories for /dev/.udev/uevent_seqnum
1408 vol_id: fix logging from libvolume_id's log function
1411 add more warnings for invalid key operations
1412 fix offsetof() build issue with recent glibc
1413 selinux: fix typo in block device node selection
1414 vol_id: add NetWare volume detection
1415 edd_id: fix "(null)" output if "mbr_signature" does not exist
1417 libvolume_id: nss - use different uuid
1420 path_id: add platform and serio support
1424 path_id: fix bashism
1427 Summary of changes from v090 to v091
1428 ============================================
1431 path_id: fix SAS device path generation
1434 udevtest: don't try to delete symlinks
1435 persistent rules: fix typo in dm rule
1436 allow NAME=="value" to check for already assigned value
1437 udevd: export initial sequence number on startup
1440 Summary of changes from v089 to v090
1441 ============================================
1444 udevd: export current seqnum and add udevsettle
1445 volume_id: fix endianess conversion typo for FAT32
1446 merge device event handling and make database content available on "remove"
1447 set default udevsettle timeout to 3 minutes
1448 export INTERFACE_OLD if we renamed a netif
1449 let udevmonitor show the possibly renamed devpath
1450 volume_id: move some debug to info level
1451 udevtrigger: fix event order
1452 usb_id: remove uneeded code
1453 remove old symlinks before creating current ones
1454 path_id: fix loop for SAS devices
1455 apply format char to variables exported by ENV
1458 add inotify support for hppa and MIPS and log if inotify is not available
1461 fix typo in error message
1464 Summary of changes from v088 to v089
1465 ============================================
1468 path_id: add bus to USB path
1471 change rule to skip removable IDE devices
1472 don't create uuid/label links for raid members
1473 volume_id: provide library
1474 fix rule order for persistent tape links
1476 volume_id: provide a custom debug function
1477 volume_id: rename subdirectory
1478 volume_id: use shared library by default
1479 because is better than cause
1480 volume_id: remove some global symbols
1481 volume_id: define exported symbols
1482 remove all stripping code
1483 man pages: mention udev(7) not udev(8)
1485 move all *_id programs to /lib/udev/
1486 update Red Hat rules
1488 pass CROSS_COMPILE to AR and RANLIB down to extras/
1489 volume_id: update README
1490 volume_id: generate man page from xml source
1492 fix symlink targets in Makefiles
1495 Summary of changes from v087 to v088
1496 ============================================
1499 persistent links: add scsi tape links and usb path support
1502 volume_id: add squashfs detection
1503 reset signal handler in event process
1504 correct use of fcntl()
1505 add udevtrigger to request events for coldplug
1506 add ',' to trusted chars
1507 volume_id: remove partition table parsing code
1508 volume_id: remove all partition table support
1509 fix spelling error in debug string
1510 rename "persistent disk" to "persistent storage"
1511 fix output for USB path
1514 Summary of changes from v086 to v087
1515 ============================================
1518 path_id: support SAS devices
1521 fix persistent disk rules to exclude removable IDE drives
1522 warn about %e, MODALIAS, $modalias
1523 remove devfs rules and scripts
1526 typo in debug text in udev_run_hotplugd.c
1529 Summary of changes from v085 to v086
1530 ============================================
1533 volume_id: replace __packed__ by PACKED macro
1534 volume_id: split raid and filesystem detection
1535 volume_id: add missing return
1536 udevd: fix queue export for multiple events for the same device
1539 workaround missing kernel headers for some architectures
1542 update to udev-084/doc/writing_udev_rules
1545 Summary of changes from v084 to v085
1546 ============================================
1549 Fix trivial spelling errors in RELEASE-NOTES
1552 fix typo in parisc support to path_id
1555 make WAIT_FOR_SYSFS usable in non "wait-only" rules
1556 fix typo in man page
1557 include sys/socket.h for klibc build
1558 cramfs detection for bigendian
1559 exit WAIT_FOR_SYSFS if the whole device goes away
1561 update Red Hat rules
1563 include errno.h in udev_libc_wrapper.c
1566 Summary of changes from v083 to v084
1567 ============================================
1571 switch CROSS to CROSS_COMPILE
1572 replace fancy silent build program by simple kernel build like logic
1573 move manpages to top level
1574 remove UDEVD_UEVENT_INITSEND
1576 scsi_id: remove dead files
1577 optimize sysfs device and attribute cache
1578 let SYSFS{} look at the device, not only the parent device
1579 add debug output to sysfs operations
1582 Summary of changes from v082 to v083
1583 ============================================
1586 man page: document when substitutions are applied for RUN and other keys
1587 check for ignore_device in loop looks redundant
1590 udevstart: fix NAME="" which prevents RUN from being executed
1591 find programs in /lib/udev for IMPORT if {program} is not given
1592 don't add $SUBSYSTEM automatically as $1 to programs
1593 remove redundant substitution of RUN key
1596 Summary of changes from v081 to v082
1597 ============================================
1600 substitute format chars in RUN after rule matching
1603 scsi_id, usb_id: request device parent by subsystem
1604 path_id: work with "all devices in /sys/devices"
1605 ignore all messages with missing devpath or action
1606 Makefile: remove dynamic config file generation
1607 path_id: handle fiber channel (Hannes Reinecke <hare@suse.de>)
1608 usb_id: don't fail on other subsytems than "scsi"
1609 don't do RUN if "ignore_device" is given
1610 increase kernel uevent buffer size
1611 move udev(8) manpage to udev(7)
1612 recreate man pages from xml source
1613 remove udev, udevstart, udevsend from the default installation
1615 rename apply_format() cause it is public now
1616 udevtest: add udev_rules_apply_format() to RUN keys
1617 let "ignore_device" always return the event successfully
1620 fixes udev build with -fpie
1623 Summary of changes from v080 to v081
1624 ============================================
1627 add DEVLINKS to "remove" event
1628 better log text and comments
1629 vol_id: probe volume as user nobody
1630 fix BUS, ID, $id usage
1631 prepare moving of /sys/class devices to /sys/devices
1634 Summary of changes from v079 to v080
1635 ============================================
1638 fix dependency for make -j2
1644 update RELEASE-NOTES + TODO
1645 fix typo in man page
1648 path_id: fix invalid character class
1652 udev_selinux.c: include udev.h
1655 Summary of changes from v078 to v079
1656 ============================================
1659 don't log error if database does not exist
1660 use udev_root instead of "/dev"in selinux matchpathcon_init_prefix()
1661 scsi_id: read page 0x80 with libata drives
1663 remove %e from man page
1666 Summary of changes from v077 to v078
1667 ============================================
1670 Update Gentoo udev main rule file.
1671 add parisc support to path_id
1674 scsi_id: -u fold multiple consecutive whitespace chars into single '_'
1677 optimize SELinux path match
1681 allow C99 statements
1682 fix segfaulting create_floppy_devices
1684 remove unused variables
1685 remove default settings in udev.conf
1686 clearenv() is now part of klibc
1687 add DEVLINKS to the event environment
1690 scsi_id: support pre-SPC3 page 83 format
1693 Summary of changes from v076 to v077
1694 ============================================
1697 merge two consecutive static strlcat's
1698 don't return an error, if "ignore_device" is used
1699 remove outdated and misleading stuff
1700 move SEQNUM event skipping to udevsend
1701 update RELEASE-NOTES
1703 allow programs in /lib/udev called without the path
1705 add target to to generate ChangeLog section
1706 update Red Hat rules
1709 allow to overwrite the configured udev_root by exporting UDEV_ROOT
1710 let udevsend ignore events with SEQNUM set
1714 Summary of changes from v75 to v076
1715 ============================================
1718 fix typo in eventrecorder
1719 volume_id: include stddef.h header
1720 remove misleading install instructions
1721 remove all built-in wait_for_sysfs logic
1722 add linux/types.h back, old glibc-kernel-headers want it
1723 volume_id: use glibc's byteswap
1724 udevd: ignore all messages without DEVPATH
1725 udevd: track exit status of event process
1726 udevd: export event queue and event state
1727 remove "udev_db" option from config file
1728 Makefile: remove exec_prefix and srcdir
1729 update README and RELEASE-NOTES
1730 udevd: track killed event processes as failed
1732 don't start udevd from udevsend
1733 udevd: add a missing return
1734 libvolume_id: fix weird fat volume recognition
1735 move some helpers from extras to /lib/udev
1737 Scott James Remnant:
1738 move delete_path() to utils
1739 clean-up empty queue directories
1740 Makefile: fail, if submake fails
1743 Summary of changes from v74 to v075
1744 ============================================
1747 Make run_directory.c stat the place it is going to try to run.
1750 forgot the ChangeLog for 074
1751 volume_id: provide libvolume_id.a file
1752 remove our own copy of klibc
1753 remove outdated HOWTO
1756 remove completely useless start script
1757 fix tests and remove no longer useful stuff
1758 replace udeveventrecorder by a shell script
1761 Summary of changes from v73 to v074
1762 ============================================
1765 never queue events with TIMEOUT set
1766 let NAME="" supress node creation, but do RUN keys
1771 add strerror() to error logs
1772 move some logging from dbg() to info()
1775 Summary of changes from v72 to v073
1776 ============================================
1779 udevd: depend on netlink and remove all sequence reorder logic
1780 print useconds in udevmonitor
1781 add RELEASE-NOTES, update TODO
1784 Summary of changes from v71 to v072
1785 ============================================
1787 Ananth N Mavinakayanahalli:
1788 libsysfs: translate devpath of the symlinked class devices to its real path
1791 add man pages for *_id programs
1794 volume_id: add OCFS Version 1
1795 volume_id: add Veritas fs
1796 volume_id: check ext fs for valid blocksize, cause magic is only 2 bytes
1797 volume_id: move blocksize validation to fix jbd recognition
1798 volume_id: fix typo in ocfs
1799 volume_id: add vxfs include
1800 volume_id: make FAT32 recognition more robust
1801 volume_id: Version 051
1802 volume_id: fix typo in ext blocksize check
1803 volume_id: Version 052
1804 FAQ: remove confusing statement about module loading
1805 cleanup compiler/linker flags
1806 use DESTDIR on uninstall, no need to pass prefix to submake
1807 allow to pass STRIPCMD, to skip stripping of binaries
1808 cleanup make release
1809 fix the new warnings I asked for
1810 move rules parsing into daemon
1811 "make STRIPCMD=" will disable the stripping of binaries
1812 remove no longer working udevd-test program
1813 "STRIPCMD=" for the EXTRAS
1814 add dummy inotify syscalls on unsupported architecture
1815 remove no longer needed waiting for "dev" file
1816 revert the "read symlink as device patch"
1817 use libsysfs to translate the class linke to the device path
1818 libsysfs: remove brute-force "bus", "driver" searching for old kernels
1819 test: add "driver" and "bus" links to test sysfs tree
1820 update RELEASE-NOTES
1821 udevd: don't daemonize before initialization
1822 log to console if syslog is not available
1824 remove precompiled rules option
1825 export DEVNAME on "remove" only if we really got a node to remove
1829 Summary of changes from v70 to v071
1830 ============================================
1833 Remove the udev.spec file as no one uses it anymore
1836 edd_id: check that EDD id is unique
1839 ata_id: open volume O_NONBLOCK
1840 add "Persistent Device Naming" rules file for disks
1841 scsi_id: switch temporary node creation to /dev
1842 volume_id: set reiser instead of reiserfs for filesystem type
1843 update devfs rules header
1847 remove no longer needed includes
1848 switch tools and volume_id from LGPL to GPLv2
1849 add edd-*-part%n to the persistent.rules
1850 update Debian persistent rules
1852 udevd: fix initial timeout handling
1853 force event socket buffer size to 16MB
1854 udevd: move logging from err to info for non-hotplug uevent
1855 fix selinux compilation
1856 libsysfs: accept sysmlinks to directories instead of real directories
1859 run_directory: fix typo in "make install"
1862 Summary of changes from v069 to v070
1863 ============================================
1866 udevd: fix udevd read() calls to leave room for null byte
1869 scsi_id: derive a UID for a SCSI-2 not compliant with the page 83
1872 fix nbd error messages with a gentoo rule hack
1873 fix scsi_id rule in gentoo config file
1876 EXTRAS/Makefile: fix install targets to match main Makefile
1879 volume_id: fix error handling with failing read()
1880 EXTRAS: cleanup and sync all Makefiles
1881 add install test to 'make buildtest'
1882 update RELEASE-NOTES
1885 fix a debug text typo in udev_rules.c
1888 Summary of changes from v068 to v069
1889 ============================================
1892 fix typo in firmware_helper
1895 firmware_helper: fix write count
1898 *_id: fix zero length in set_str()
1899 add program name to logged error
1900 fix exit code of udevinitsend and udevmonitor
1901 udevd: keep the right order for messages without SEQNUM
1902 volume_id: don't probe for mac_partition_maps
1903 udevmonitor: cleanup on exit
1904 path_id: remove SUSE specific PATH
1906 add pci_express to bus list
1908 store ENV{key}="value" exported keys in the database
1909 fix lookup for name in the udevdb, it should return the devpath
1910 prepare for new HAL udevdb dump
1911 print persistent data with "udevinfo -q all"
1912 change parameter order of udev_db_search_name()
1913 add and use name_list_cleanup() for cleaning up the string lists
1914 don't store devpath in udevdb, we don't need it
1915 add uft8 validation for safe volume label exporting
1916 start to enforce plain ascii or valid utf8
1917 use WRITE_END/READ_END for the pipe index
1918 remove not needed sig_flag for state of signal_pipe
1919 don't reenter get_udevd_msg() if message is ignored
1920 rename ...trailing_char() to ...trailing_chars()
1921 vol_id: ID_LABEL_SAFE will no longer contain fancy characters
1922 udevd: move some logging to "info" and "err"
1923 remove special TIMEOUT handling from incoming queue
1924 udev_test.pl: we replace untrusted chars with '_'
1925 check the udevdb before assigning a new %e
1926 update RELEASE-NOTES
1927 udevinfo: add database export
1928 write man page masters in DocBook XML
1929 udevinfo: rename dump() to export()
1930 test the automatic man page rebuild and checkin
1931 Makefile: remove all the duplicated rules
1932 all man pages rewritten to use DocBook XML
1933 add missing udevsend man page
1934 also forgot udevmonitor.8
1935 udevinfo: restore -d option
1936 scsi_id: rename SYSFS to LIBSYSFS
1937 add edd_id tool to match BIOS EDD disk information
1938 move and update libsysfs.txt
1939 klibc: update to version 1.1.1
1940 delete cdromsymlinks* - obsoleted by cdrom_id and IMPORT rules
1941 delete docs/persistent_naming - obsoleted by persistent disk names
1942 delete old Fedora html page
1943 add "totally outdated" header to docs/overview :)
1945 fix useless but funny name_cdrom.pl script to work again
1947 Makefile: fix prerequisits for $(PROGRAMS)
1948 Makefile: cleanup install targets
1949 remove chassis_id program
1950 fic gcov use and move it into the Makefile
1951 FAQ: update things that have changed
1954 switch to '==' in raid-devfs.sh
1957 Summary of changes from v067 to v068
1958 ============================================
1961 add EXTRAS documentation to the README file.
1962 Always open the cdrom drive in non-blocking mode in cdrom_id
1963 cdrom_id: change err() to info() to help with debugging problems
1966 cleanup some debug output and move to info level + unify select() loops
1967 move udevmonitor to /usr/sbin
1968 ENV{TEST}=="1" compares and ENV{TEST}="1" sets the environment
1969 vol_id: fix sloppy error handling
1970 fix typo in cdrom_id syslog
1971 bring std(in|out|err) fd's in a sane state
1972 fix printed udevmonitor header
1975 Summary of changes from v066 to v067
1976 ============================================
1979 added the cdrom.h #defines directly into the cdrom_id.c file
1983 fix make install, as we don't provide a default rule set anymore
1984 fix more compiler warnings ...
1985 fix udevstart event ordering, we want /dev/null very early
1986 don't fail too bad, if /dev/null does not exist
1989 Summary of changes from v065 to v066
1990 ============================================
1993 update gentoo rule file.
1994 Created cdrom_id program to make it easier to determine cdrom types
1995 added cdrom_id to the build check
1996 updated gentoo rule file to handle removable ide devices.
1997 changed cdrom_id exports to be easier to understand and consistant with other _id programs.
1998 fix klibc build issue in cdrom_id.c
1999 Change the gentoo rules to use cdrom_id instead of cdsymlink.sh
2000 changed location of gentoo helper apps to be /sbin instead of in scripts dir
2001 tweak the gentoo rules some more.
2004 add NETLINK define for the lazy distros
2005 read sysfs attribute also from parent class device
2006 switch some strlcpy's to memcpy
2007 allow clean shutdown of udevd
2008 add flag for reading of precompiled rules
2009 update distro rules files
2012 add firmware_helper to load firmware
2013 more distro rules updates
2015 remove example rules and put the dev.d stuff into the run_directory folder
2016 trivial text cleanups
2018 split udev_util in several files
2020 allow logging of all output from executed tools
2021 add Usage: to udevmonitor and udevcontrol
2022 move some logging to the info level
2028 Summary of changes from v064 to v065
2029 ============================================
2032 Added persistent name rules for block devices to gentoo rule file.
2033 Added horrible (but fun) path_id script to extras.
2034 Update gentoo rules file.
2037 update release notes for next version
2038 add udevmonitor, to debug netlink+udev events at the same time
2039 allow RUN to send the environment to a local socket
2040 fix GGC signed pointer warnings and switch volume_id to stdint
2043 Summary of changes from v063 to v064
2044 ============================================
2047 volume_id: add OCFS (Oracle Cluster File System) support
2051 add ID_BUS to *_id programs
2052 create_floppy_devices: add tool to create floppy nodes based on sysfs info
2055 move code to its own files
2056 make SYSFS{} usable for all devices
2057 add padding to rules structure
2058 allow rules to have labels and skip to next label
2059 thread unknown ENV{key} match as empty value
2062 Summary of changes from v062 to v063
2063 ============================================
2066 fix typo in GROUP value application
2069 add 'make tests' as I'm always typing that one wrong...
2070 Really commit the udev_run_devd changes...
2071 Fixed udev_run_devd to run the /etc/dev.d/DEVNAME/ files too
2072 fix position of raw rules in gentoo config file
2075 dasd_id: add s390 disk-label prober
2076 fix usb_id and let scsi_id ignore "illegal request"
2079 volume_id: remove s390 dasd handling, it is dasd_id now
2080 trivial fixes for *_id programs
2081 IMPORT: add {parent} to import the persistent data of the parent device
2082 allow multiple values to be matched with KEY=="value1|value2"
2083 udevd: set incoming socket buffer SO_RCVBUF to maximum
2084 remember mapped rules state
2085 ata_id: check for empty serial number
2086 compile dasd only on s390
2089 correct default mode documentation in udev
2092 Summary of changes from v061 to v062
2093 ============================================
2096 fix symlink values separated by multiple spaces
2097 update RELEASE-NOTES
2098 fix typo in group assignment
2099 fix default-name handling and NAME="" rules
2100 add WAIT_FOR_SYSFS key to loop until a file in sysfs arrives
2101 fix unquoted strings in udevinitsend
2103 Summary of changes from v060 to v061
2104 ============================================
2107 Sync up the Debian rules files
2108 fix cdrom symlink problem in gentoo rules
2109 Fix ChangeLog titles
2112 update RELEASE-NOTES
2113 we want to provide OPTFLAGS
2114 rename ALARM_TIMEOUT to UDEV_ALARM_TIMEOUT
2115 udevd: optimize env-key parsing
2116 don't resolve OWNER, GROUP on precompile if string contains %, $
2117 set default device node to /dev
2118 create udevdb files only if somehting interesting happened
2119 pack parsed rules list
2120 replace useless defines by inline text
2121 move rule matches to function
2122 add usb_id program to generate usb-storage device identifiers
2123 add IEEE1394 rules to the gentoo rule file
2124 fake also kernel-name if we renamed a netif
2125 allow OPTIONS to be recognized for /sys/modules /sys/devices events
2126 switch gentoo rules to new operators
2129 Summary of changes from v059 to v060
2130 ============================================
2133 Fix the gentoo udev rules to allow the box to boot properly
2136 Udev doesn't properly build with $CROSS
2139 Keep udevstart from skipping devices without a 'dev' file
2142 #define NETLINK_KOBJECT_UEVENT
2145 Summary of changes from v058 to v059
2146 ============================================
2149 Update the gentoo rule file
2150 Fix udevinfo for empty sysfs directories
2151 Fix makefile to allow 'make release' to work with git
2154 udev: fix netdev RUN handling
2155 udevcontrol: fix exit code
2158 prepare RELEASE-NOTES
2159 add ID_TYPE to the id probers
2160 add -x to scsi_id to export the queried values in env format
2161 store the imported device information in the udevdb
2162 rename udev_volume_id to vol_id and add --export option
2163 add ata_id to read serial numbers from ATA drives
2164 IMPORT allow to import program returned keys into the env
2165 unify execute_command() and execute_program()
2166 IMPORT=<file> allow to import a shell-var style config-file
2167 allow rules to be compiled to one binary file
2168 fix the fix and change the file to wait for to the "bus" link
2169 fix udevstart and let all events trvel trough udev
2170 prepare for module loading rules and add MODALIAS key
2171 remove device node, when type block/char has changed
2172 Makefile: remove dev.d/ hotplug.d/ from install target
2173 udevcontrol: add max_childs command
2174 udevd: control log-priority of the running daemon with udevcontrol
2175 udeveventrecorder: add small program that writes an event to disk
2176 klibc: add missing files
2177 udevinitsend: handle replay messages correctly
2178 udev man page: add operators
2179 udevd: allow starting of udevd with stopped exec-queue
2180 klibc: version 1.0.14
2181 udev: handle all events - not only class and block devices
2182 volume_id: use udev-provided log-level
2183 udev: clear lists if a new value is assigned
2184 udev: move dev.d/ handling to external helper
2185 udev: allow final assignments :=
2186 udevd: improve timeout handling
2187 Makefile: fix DESTDIR
2189 udevd: add udevcontrol
2190 udevd: listen for netlink events
2193 Dialout group fix for capi devices in the gentoo rules file
2195 Summary of changes from v057 to v058
2196 ============================================
2199 o Writing udev rules docs update
2202 o update cdsymlinks to latest version
2205 o remove detach_state files from the sysfs test tree
2206 o Update permissions on test scripts so they will run properly now
2207 o hopefully fix up the symlinks in the test directory
2208 o Removed klibc/klibc.spec as it is autogenerated
2209 o Added symlinks thanks to Kay's script and git hacking
2210 o add Red Hat/Fedora html documenation
2211 o Update Red Hat default udev rules
2214 o selinux: fix handling during creation of symlinks
2215 o Fedora udev.rules update
2216 o libsysfs: version 2.0
2217 o klibc: version 1.0.7
2220 o Fix libsysfs issue with relying on the detach_state file to be
2222 Summary of changes from v056 to v057
2223 ============================================
2225 <tklauser:access.unizh.ch>:
2226 o fix stupid all_partitions bug
2229 o add test for make -j4 to build-check
2230 o klibc: version 1.0.6
2231 o update Debian rules
2232 o apply default permissions only for devices that will need it
2233 o adapt RELEASE-NOTES
2234 o udev_volume_id: fix endianess macros
2235 o udev-test.pl: add test for DEVNAME export to RUN environment
2236 o update the man page to reflect the recent changes
2237 o export DEVNAME to RUN-key executed programs
2238 o fix make -j4 and the local klibc-install
2239 o update RELEASE-NOTES
2240 o add RUN key to be able to run rule based notification
2241 o fix udevtest to print the error if logging is disabled
2242 o move execute_program to utils + add action to init_device
2243 o correct correction for error path for PROGRAM execution
2244 o correct error path for PROGRAM execution
2245 o klibc: version 1.0.5
2246 o check for strlen()==0 before accessing strlen()-1
2247 o allow to match against empty key values
2248 o read %s{}-sysfs values at any device in the chain
2249 o udev_rules.c: don't change sysfs_device while walking up the device chain
2250 o klibc: strlcpy/strlcat - don't alter destination if size == 0
2251 o fix klibc's broken strlcpy/strlcat
2252 o udevinfo: print SYSFS attribute the same way we match it
2253 o remove untrusted chars read from sysfs-values or returned by PROGRAM
2254 o udevinfo: print errors to stderr instead of stdout
2255 o klibc: version 1.0.4
2256 o support log-priority levels in udev.conf
2257 o test-suite: remove UDEV_TEST, it's not needed anymore
2258 o libsysfs: remove trailing slash on SYSFS_PATH override
2261 Summary of changes from v055 to v056
2262 ============================================
2264 <tklauser:access.unizh.ch>:
2265 o fix header paths in udev_libc_wrapper.c
2268 o udev-test.pl: use more common user/group names
2269 o klibc: remove SCCS directories from the temporary klibc install
2270 o udev-test.pl: add a test where the group cannot be found in /etc/passwd
2271 o udev-test.pl: add check for textual uid/gid
2272 o fix bad typo that prevents the GROUP to be applied
2273 o udevd: don't delay events with TIMEOUT in the environment
2274 o klibc: use klcc wrapper instead of our own Makefile
2275 o change call_foreach_file to return a list
2278 Summary of changes from v054 to v055
2279 ============================================
2281 <jkluebs:luebsphoto.com>:
2282 o This patch causes the remove handler to check that each symlink actually points to the correct devnode and skip it if it does not.
2284 <pebenito:gentoo.org>:
2287 <tklauser:access.unizh.ch>:
2288 o The following patch fixes some warnings when compiling volume_id from udev with the -Wall compiler flag. Define _GNU_SOURCE for strnlen() and correct the path to logging.h
2289 o The following patch fixes a warning when compiling chassis_id from udev with the -Wall compiler flag. There are too much conversions in the format string of sscanf(). One %d can be dropped.
2293 o added frugalware udev ruleset
2294 o merge selinux and Kay's symlink fixes together
2297 o volume_id: Fix label/uuid reading for reiserfs
2300 o add udevstart to the RELEASE-NOTES
2301 o volume_id: version 43
2302 o clarify the shortcomings of %e
2303 o correct rule match for devices without a physical device
2304 o remove unneeded code, libsysfs does this for us
2305 o add final release note
2306 o add ENV{} key to match agains environment variables
2307 o simplify sysfs_pair handling
2308 o add a test and simplify debug statement
2309 o support =, ==, !=, += for the key match and assignment
2310 o add OPTION="last_rule" to skip any later rule
2311 o rename namedev_dev to udev_rule
2312 o correct enum device_type
2313 o remove udevstart on make clean
2314 o volume_id: version 42
2315 o volume_id: version 41
2316 o remove unneeded include
2317 o The path to dlist.h is not correct
2318 o udevinfo -d: use '=' as separator, cause ':' may be a part of the devpath
2319 o klibc: version 1.0.3
2320 o add RELEASE-NOTES file
2321 o test suite: move "driver" link to physical device
2322 o remove PLACE key match
2323 o don't lookup "root" in the userdb
2325 o fix segfaulting udev while DRIVER matching
2327 o klibc: version 0.214
2328 o rename device_list->list to device_list->node
2329 o replace strncpy()/strncat() by strlcpy()/strlcat()
2330 o split udev and udevstart
2331 o udev_volume_id: version 39
2332 o rename LOG to USE_LOG in all places
2333 o remove Makefile magic for klibc integration
2334 o klibc_fixups: remove no longer needed stuff
2335 o udev_volume_id: volume_id v38
2336 o use numeric owner/group as default values to avoid parsing userdb
2337 o fix up segfaulting binaries with new klibc
2338 o udevinfo -d: speed-up device dump
2339 o klibc: version 0.211
2340 o klibc_fixups: remove unneeded stuff
2341 o replace weird defines by real code
2342 o udev-test.pl: remove useless tests
2343 o allow unlimitied count of symlinks
2344 o unmap db-file after use
2345 o remove typedef for call_foreach_file() handler function
2346 o correct udev_init_device
2347 o rename attributes to options
2348 o kill stupid gcc4 warning
2349 o trivial clenaup of namedev code
2350 o klibc: check for gcc4
2351 o klibc: update v0.205
2354 o gentoo rule update for raid devices
2357 Summary of changes from v053 to v054
2358 ============================================
2360 <tklauser:access.unizh.ch>:
2361 o udev_volume_id: add Reiser4 support
2364 o namedev: skip backslashes only if followed by newline
2365 o wait_for_sysfs: add joydev
2366 o udevinfo: print devpath -> node relationship for all devices
2367 o trivial rename of some variables
2369 o big libsysfs diet (pre 2.0 version)
2370 o udev_volume_id: volume_id v35
2371 o add "serio" to bus list
2372 o determine device type in udev_init_device()
2373 o move kernel name/number evaluation into udev_init_device()
2374 o detect NAME="" as ignore_device rule
2375 o trivial namedev cleanup
2376 o cleanup db functions
2377 o clean up match_place()
2378 o switch device type to enum
2379 o switch major/minor to dev_t
2380 o remove the device node only if the major/minor number matches
2381 o libsysfs: work around a klibc bug
2382 o introduce OPTIONS=ignore_device, ignore_remove, all_partitions" key
2383 o namedev: execute PROGRAM only once and not possibly for every physical device
2386 o update scsi_id to work with libsysfs changes
2389 Summary of changes from v052 to v053
2390 ============================================
2393 o fix gentoo fb permission issue
2394 o allow simple-build-check.sh to go faster if MAKEOPTS is set
2395 o make the release tarballs have writable files in them
2396 o remove gentoo permission file as it's not valid anymore
2399 o fix special file mode mask for temporary device node
2400 o udevstart: simplify "dev" file searching
2401 o udev_volume_id: remove temporary node creation and parent handling
2402 o add %P modifier to query the node name of the parent device
2403 o udev_volume_id: remove __packed__ from dasd structure as it does not work
2404 o create /block/*/range count of partitons for all_partitions
2407 o scsi_id changes for use with udev %N and %p
2410 Summary of changes from v051 to v052
2411 ============================================
2414 o debian: update rules files
2415 o raid-devfs.sh: devfs names for hardware RAID controllers
2416 o scsi_id: when udevstart is started, /tmp is not writeable
2417 o cdsymlinks.sh: trivial fix, the variable is initialized to '', not 0
2419 <sschweizer:gmail.com>:
2420 o gentoo/udev.rules: add default permissions for sound devices
2423 o fix example comment in ide-devfs.sh
2424 o Add infiniband to gentoo rules
2425 o Another gentoo fix, adding dvb support
2426 o Fix gentoo bug #76056 (fb device group permissions.)
2427 o Fix gentoo bug #81102, device nodes for the pktcdvd device
2430 o provide temporary device node for callouts to access the device
2431 o udev_volume_id: fix dasd disklabel reading with -l option
2432 o udev_volume_id: volume_id version 034
2433 o udev_volume_id: rename probe_ibm into probe_dasd
2434 o udev_volume_id: volume_id version 032
2435 o Makefile: add some more warnings and prepare for clean gcc4 compile
2436 o Makefile: cleanup conditional config option sections
2437 o fix -Wsign-compare warnings
2438 o chassis_id: clean compilation and fix bad function parameter passing
2439 o simple_build_check: make it possible to pass KERNEL_DIR
2440 o selinux: cleanup udev integration
2443 o trivial: remove _all_ trailing slashes with no_trailing_slash()
2444 o trivial: fix signedness
2445 o namdev: allow symlink-only rules to specify node permissions
2446 o udevd: fix valgrind warning
2449 Summary of changes from v050 to v051
2450 ============================================
2452 <roland:digitalvampire.org>:
2453 o This fixes a silly mistake in how udevinfo prints the major and minor numbers (right now it prints the minor next to "MAJOR" and the major next to "MINOR" ;)
2455 <tklauser:access.unizh.chbk>:
2456 o I tried to compile udev 050plus with the GCC 4.0 snapshot 200412119 and got two errors about possibly uninitialized structs, so I fixed this.
2458 Christian Bornträger:
2459 o udev_volume_id: fix -d option
2462 o gentoo fb permission fix
2463 o fix gcc 2.96 issue in libsysfs
2464 o remove the lfs startup script on request of the author
2465 o clean up the aoe char device rules, and delete the block one as it's not needed
2466 o add aoe block and char device rules to the gentoo rule file
2467 o fix udev_volume_id build error
2470 o rearrange link order in Makefile
2473 o udev_volume_id: new version of volume_id
2474 o klibc: update to version 0.198
2475 o udev_volume_id: fix FAT label reading
2476 o klibc: update to version 0.196
2477 o udevd: throttle the forking of processes
2478 o udevd: add possible initialization of expected_seqnum
2479 o udevd: it's obviously not the brightest idea to exit a device node manager if it doesn't find /dev/null
2480 o udevd: separate socket handling to prepare for other event sources
2481 o udevd: support -d switch to become a daemon
2482 o udev_volume_id: version 27
2483 o udevd: split up message receiving an queueing
2484 o remove useless warning if udev.conf contains keys not read by udev itself
2485 o improve event sequence serialization
2486 o remove udevsend syslog noise on udevd startup
2487 o limit the initial timeout of the udevd event handling
2488 o correct detection of hotplug.d/ udevsend loop
2489 o correct log statement
2490 o remove default_* permissions from udev.conf file
2491 o update Fedora config files and add some more tests
2492 o allow permissions only rules
2493 o add SUBSYSTEM rule to catch all block devices and apply the disk permissions
2494 o update Fedora config files
2495 o handle renamed network interfaces properly if we manage hotplug.d/
2496 o allow multiline rules by backslash at the end of the line
2497 o add OnStream tape drive rules
2498 o simplify rules file by setting default mode to 0660
2499 o simplify permission application
2500 o I broke the extras/ again. Add simple build test script now
2501 o Merge vrfy.org:/home/kay/src/udev into vrfy.org:/home/kay/src/udev.kay
2502 o initial merge of fedora udev.permissions into udev.rules
2503 o remove permissions file mentioning from the udev man page
2504 o fix some typos in gentoo's udev.rules introduced by the merge
2507 o The attached patch fixes the code path if namedev_name_device() fails
2509 Summary of changes from v049 to v050
2510 ============================================
2512 <harald:redhat.com>:
2515 <tklauser:access.unizh.ch>:
2516 o I made some more changes to the manpage of udev including
2519 o update libsysfs to CVS version and fix segfaulting attribute reading
2520 o klibc supports LOG_PID now, so remove our own implementation
2521 o avoid building klibc test programs and pass SUBDIRS= to klibc clean
2524 Summary of changes from v048 to v049
2525 ============================================
2528 o fix 'make clean' error in klibc
2531 o update klibc to 0.194
2532 o export DEVNAME regardless of the state of udev_dev_d
2533 o add class specific files for class/spi_transport and class/spi_host
2534 o udevd-test.pl: remove wrong date calculation
2535 o check earlier if we should run as udevstart
2536 o remove double initialization
2537 o include missing header to udevtest.c
2538 o add -V option to udev to print the version number
2539 o prevent udev node creatinon for "class" registration
2540 o udevd: serialization of the event sequence of a chain of devices
2541 o add a class/fc_host file to the list of what to wait for
2542 o udev_volume_id: links sysfs.a instead of all objects
2545 o remove leftover from udevinfo's -d option
2548 Summary of changes from v047 to v048
2549 ============================================
2552 o fix udev_volume_id so it will now build properly
2553 o fix scsi_id build errors due to changes in the main udev makefile
2556 Summary of changes from v046 to v047
2557 ============================================
2559 <klauser:access.unizh.ch>:
2560 o Various typos and other litte errors in udev.8.in
2562 <sjoerd:spring.luon.net>:
2563 o DEVNAME on device removal
2565 <sschweizer:gmail.com>:
2566 o Allow GROUP to have modifiers in it
2569 o add more debian rules files
2570 o move distro specific config files into their own directories
2571 o update debian rules files
2572 o added asterix rules to the gentoo file
2573 o use udevstart for udev.init.* files
2574 o delete a bunch of files no longer needed
2575 o fix gentoo scsi cdrom rule
2576 o Fix the multithreaded build again
2578 o comment out ability to run udev-test.pl with valgrind
2579 o fix spurious valgrind warning in udev
2580 o fix udevinfo '-q path' option as it was not working
2582 o fix parallel build error
2585 o update Fedora dev.d/ example and remove unused conf.d/ directory
2586 o don't install distribution specific init script on "make install"
2587 o restore OWNER/GROUP assignment in rule coming from RESULT
2588 o make gcov compile scripts working with recent gcc
2589 o fix udev-test/udev-test.pl to work with again
2590 o add net/atml and class/ppdev to the wait_for_sysfs exception list
2591 o add net/nlv* devices to the exception list
2592 o add "pcmcia" and "fc_transport" to the wait_for_sysfs lists
2593 o remove unused timestamp field
2594 o simplify permission handling
2595 o handle /etc/hotplug.d/ only if the event comes from udevd
2596 o trivial cleanups and change some comments
2597 o remove unused variables
2598 o udevsend/udevd handle events without a subsystem
2599 o use blacklist on device "remove" and remove dev.d/ call code duplication
2600 o update the man pages and correct Usage: hints
2601 o don't call the hotplug scripts with a test run
2602 o don't call dev.d/ scripts twice, if directory = subsystem
2603 o remove archive file if we changed something
2604 o link archive insted of objects
2605 o rename udev_lib to udev_utils and dev_d to udev_multiplex
2606 o handle whole hotplug event with udevd/udev
2607 o integrate wait_for_sysfs in udev
2608 o make the searched multiplex directories conditionally
2609 o add MANAGED_EVENT to the forked udev environment
2610 o export DEVNAME on remove event
2611 o export udev_log flag to the environment
2612 o remove my test code
2613 o add support for /devices-devices without any file to wait for
2614 o Patch from Alex Riesen <raa.lkml@gmail.com>
2615 o add a bunch of busses to the list of what to wait for
2616 o close connection to syslog in forked udevd child
2617 o udevd exit path cleanup
2618 o fix network device naming bug
2621 Summary of changes from v045 to v046
2622 ============================================
2625 o make spotless for releases
2628 o Don't try to print major/minor for devices without a dev file
2629 o remove get_device_type and merge that into udev_set_values()
2630 o prevent udevd crash if DEVPATH is not set
2631 o add ippp and bcrypt to the exception lists of wait_for_sysfs
2632 o let klibc add the trailing newline to syslog conditionally
2633 o disable logging for udevstart
2634 o add NAME{ignore_remove} attribute
2635 o remove historical SYSFS_attr="value" format
2636 o don't wait for sysfs if the kernel(2.6.10-rc2) tells us what not to expect
2637 o change key names in udevinfo sysfs walk to match the kernel
2638 o support DRIVER as a rule key
2639 o support SUBSYSTEM as a rule key
2640 o rename udevdb* to udev_db*
2641 o Make dev.d/ handling a separate processing stage
2642 o make the udev object available to more processing stages
2643 o remove udev_lib dependency from udevsend, which makes it smaller
2644 o add ACTION to udev object to expose it to the whole process
2645 o make udevinfo's -r option also workimg for symlink queries
2646 o let udev act as udevstart if argv[1] == "udevstart"
2647 o improve udevinfo sysfs info walk
2648 o add sysfs info walk to udevinfo
2649 o pass the whole event environment to udevd
2650 o replace tdb database by simple lockless file database
2653 Summary of changes from v044 to v045
2654 ============================================
2657 o Some updates for Gentoo's udev rules
2660 Summary of changes from v043 to v044
2661 ============================================
2664 o add cdsymlinks.sh support to gentoo rules file
2665 o fix gentoo legacy tty rule
2666 o remove 'sudo' usage from the Makefile
2667 o make udev-test.pl test for root permissions before running
2670 o reduce syslog noise of udevsend if multiple instances try to start udevd
2671 o add i2c-dev to the list of devices without a bus
2674 Summary of changes from v042 to v043
2675 ============================================
2678 o add test target to makefile
2679 o add dumb script to show all sysfs devices in the system
2682 o Shut up wait_for_sysfs class/net failure messages, as it's not possible to
2683 get that right for all net devices. Kernels later than 2.6.10-rc1 will
2684 handle that by carrying the neccessary information in the hotplug event.
2685 o wait() for specific pid to return from fork()
2686 o Don't use any syslog() in signal handler, cause it may deadlock
2687 o Add support for highpoint ataraid to volume_id to suppress label reading on raid set members.
2688 o Add a bunch of devices without "device" symlinks
2689 o Exit, if udevtest cannot open the device (segfault)
2690 o Patches from Harald Hoyer <harald@redhat.com>
2691 o Apply the default permissions even if we found a entry in the permissions
2692 file. Correct one test, as the default is applied correctly now and the
2693 mode will no longer be 0000.
2694 o add test for format chars in multiple symlinks to replace
2695 o Add net/vmnet and class/zaptel to the list of devices without physical device
2698 Summary of changes from v040 to v042
2699 ============================================
2702 o add inotify to the rules for gentoo
2705 o skip waiting for device if we get a bad event for class creation and not for a device underneath it
2706 o add net/pan and net/bnep handling
2707 o switch wait for bus_file to stat() instead of open() add net/tun device handling add ieee1394 device handling
2708 o Remove the last klibc specific line from the main udev code Move _KLIBC_HAS_ARCH_SIG_ATOMIC_T to the fixup file which is automatically included by the Makefile is we build with klibc
2709 o ignore *.rej files from failed patches
2710 o update to libsysfs 1.2.0 and add some stuff klib_fixup Now we have only the sysfs.h file different from the upstream version to map our dbg() macro.
2711 o improve klibc fixup integration
2712 o cleanup udevd/udevstart
2713 o expose sysfs functions for sharing it
2716 Summary of changes from v039 to v040
2717 ============================================
2720 o wait_for_sysfs update for dm devices
2723 o sparse cleanups on the tree
2724 o fix stupid cut-and-paste error for msr devices on gentoo boxes
2725 o add *~ to bk ignore list
2726 o delete udevruler.c as per Kay's request
2727 o fix up the wait_for_sysfs_test script a bit
2730 o fix debug in volume id / fix clashing global var name
2733 o cleanup netif handling and netif-dev.d/ events
2734 o big cleanup of internal udev api
2735 o don't wait for dummy devices
2737 o Fix ppp net devices in wait_for_sysfs
2738 o Fix wait_for_sysfs messages (more debugging info)
2741 Summary of changes from v038 to v039
2742 ============================================
2745 o Hopefully fix the vcs issue in wait_for_sysfs
2746 o take out & from wait_for_sysfs_test that I previously missed
2747 o add very nice cdsymlinks scripts
2748 o add some helper scripts for dvb and input devices
2749 o add debian config files
2750 o let the extras/ programs build "pretty" also
2751 o tweak the ccdv program to handle files in subdirectories being built
2752 o crap, I messed up the 'sed' instances pretty badly, this fixes the config and man page mess
2753 o fix broken 'make -j5' functionality
2756 o swich attribute open() to simple stat()
2757 o wait_for_sysfs update for /class/firmware and /class/net/irda devices
2758 o fix unusual sysfs behavior for pcmcia_socket
2759 o remove sleeps from udev as it is external now
2764 o update udev to scsi_id 0.7
2765 o pass SYSFS setting down for extras builds
2766 o move assignments past local variables
2769 Summary of changes from v037 to v038
2770 ============================================
2772 <andrew.patterson:hp.com>:
2773 o Re: Problem parsing %s in udev rules
2776 o fix up error in building extras and libsysfs
2778 Summary of changes from v036 to v037
2779 ============================================
2785 o fix compilation warning in tdb log message
2786 o Fix build error with klibc due to recent changes
2788 o add wait_for_sysfs test script to the tarball to help people debug their boxes
2789 o add ipsec to wait_for_sysfs ignore list
2790 o added ccdv to bk ignore list
2791 o a few more Makefile tweaks for the quiet feature
2792 o Make the build silent, thanks to a helper program from ncftp
2793 o rename files to have '_' instead of '-' in them
2794 o change max time to wait in wait_for_sysfs to 10 seconds to hopefully handle some slow machines
2795 o add support for class/raw/ to wait_for_sysfs
2796 o fix up Makefile for wait_for_sysfs udev_version.h dependancy
2797 o remove the debian specific file, as they don't want to share with the rest of the world :(
2800 o prevent deadlocks on an corrupt udev database
2801 o wait_for_sysfs_update
2805 o fix incompatible pointer type warning
2808 Summary of changes from v035 to v036
2809 ============================================
2812 o add the error number to the error message in wait_for_sysfs to help out in debugging problems
2814 Summary of changes from v034 to v035
2815 ============================================
2818 o added ieee1394 support to wait_for_sysfs
2819 o update wait_for_sysfs with a bunch more devices thanks to user reports
2821 Summary of changes from v033 to v034
2822 ============================================
2825 o wait_for_sysfs bluetooth class update
2828 o add comment in wait_for_sysfs to explain the structure better
2829 o Revert previous dev_d.c change, it's not what is causing HAL problems
2830 o hm, somethings odd with DEVPATH, see if this fixes it
2831 o 33_bk mark for the makefile
2832 o wait_for_sysfs: clean up the logic for the list of devices that we do not expect device symlinks for
2833 o get rid of annoying extra lines in the syslog for some libsysfs debug messages
2834 o added support for i2c devices in wait_for_sysfs.c
2835 o add support for i2c-adapter devices to wait_for_sysfs.c
2837 Summary of changes from v032 to v033
2838 ============================================
2840 <harald:redhat.com>:
2841 o udev close on exec
2842 o some cleanups and security fixes
2843 o some cleanups and security fixes
2845 o cleanup PATCH for extras/chassis_id/Makefile
2847 <kpfleming:backtobasicsmgmt.com>:
2848 o respect prefix= setting in built udev.conf (updated)
2851 o add support for usb interfaces to wait_for_sysfs to keep it quiet
2852 o enable native tdb spinlocks on i386 platforms
2853 o delete extras/multipath-tools as per the author's request
2854 o be paranoid in dev_d.c
2855 o add USE_SELINUX to README documentation so people have a chance to see what is going on
2856 o update the selinux.h file to start to look sane
2857 o update bk ignore list for the wait_for_sysfs binary
2858 o kdetv wants to see device nodes in /dev
2859 o update comments in scsi-devfs.sh
2860 o fix up Makefiles to get the klibc build working properly
2861 o update bk ignore list for new klibc generated files
2862 o oops forgot to add the new klibc/include directory
2863 o update klibc to version 0.181
2866 o fix problems with dev.d and udevstart
2867 o wait_for_sysfs debug cleanup
2868 o fix problems using scsi_id with udevstart
2870 o finally solve the bad sysfs-timing for all of us
2871 o volume-id build fix and update
2872 o switch udev's seqnum to u64
2874 o fix udev segfaults with bad permissions file
2877 o update udev to include scsi_id 0.6
2880 Summary of changes from v031 to v032
2881 ============================================
2883 <harald:redhat.com>:
2887 o handle only block and class devices
2888 o fix udevstart badly broken in udev 031
2891 Summary of changes from v030 to v031
2892 ============================================
2894 <arun:codemovers.org>:
2895 o udev - read long lines from config files overflow fix
2897 <ballarin.marc:gmx.de>:
2898 o Update the FAQ with info about hardlink security
2901 o compatibility symlinks for udev
2904 o Minor POSIX-fixes for udev
2907 o add symlink for video rule
2908 o add a "first" list to udevstart and make it contain the class/mem/ devices
2909 o fix compiler warning in udevtest.c
2910 o Fix old-style pty breakage in rules file for tty device
2911 o add rules for i386 cpu devices
2912 o add permission for legotower usb devices
2915 o Fix naming ethernet devices in udevstart
2916 o update udev_volume_id
2917 o let /sbin/hotplug execute udev earlier
2918 o pass SEQNUM trough udevd
2919 o fix manpages based on esr's spambot
2922 o add microcode rule to permissions.gentoo file
2925 o Try to provide a bit of security for hardlinks to /dev entries
2928 o udevsend depends on udev_lib.o
2932 o clean up start_udev a bit
2933 o Make udev/udevstart be one binary
2934 o Add 'asmlinkage' to udev-030
2937 Summary of changes from v029 to v030
2938 ============================================
2941 o fix stupid off-by-one bug that caused udevstart to die on x86-64 boxes
2944 Summary of changes from v028 to v029
2945 ============================================
2948 o add permission rule for jogdial device
2949 o fix dumb bug I added to udevstart
2950 o make a "last list" of devices for udevstart to operate on last
2951 o fix permission problem with input event and ts nodes for gentoo
2952 o change default perms of misc/rtc to be readable by anyone
2955 o allow NAME_SIZE > SYSFS_PATH_MAX
2958 Summary of changes from v027 to v028
2959 ============================================
2961 <atul.sabharwal:intel.com>:
2962 o Patch for chassis_id exras module
2965 o Writing udev rules doc update
2968 o clean up block whitelist search logic a bit
2969 o reverse order of scanning of udevstart to look at class before block
2972 o update udev_volume_id
2975 o udevstart performance increase
2978 o update udev scsi_id to scsi_id 0.5
2981 Summary of changes from v026 to v027
2982 ============================================
2984 <fork0:users.sf.net>:
2985 o fix handle leak in udev_lib.c
2988 o tweak the gentoo default permission rules as they are wrong for tty and misc devices
2991 Summary of changes from v025 to v026
2992 ============================================
2998 o add test for ! in partition name
3000 o Update to version 117 of klibc (from version 108)
3001 o add volume_id ignore rule for bk
3002 o add volume_id support to the udev.spec file
3003 o remove dbus and selinux stuff from the udev.spec file
3004 o delete udev_selinux as it doesn't work properly and is the wrong way to do it
3005 o Deleted the udev_dbus extra as it didn't really work properly and HAL has a real solution now
3006 o add udev.permissions.slackware file
3007 o udevstart: close open directories
3011 o catchup with recent klibc
3012 o Re: udevsend fallback
3013 o udev_volume_id update
3014 o udev callout for reading filesystem labels
3015 o udev callout for reading filesystem labels
3016 o udev default config layout changes
3019 o evaluate getenv() return value for udev_config.c
3021 Summary of changes from v024 to v025
3022 ============================================
3025 o devfs.sh-ide-floppy
3027 <sjoerd:spring.luon.net>:
3028 o DEVNODE -> DEVNAME transition fixes
3031 o Update writing udev rules docs
3034 o make dev.d call each directory in the directory chain of the device name, instead of just the whole name
3035 o add devd_test script
3036 o add more permissions based on SuSE's recommendations
3037 o added rules for tun and raw devices
3038 o add udev conf.d file
3039 o Switch the default config to point to a directory for the rules and permission files
3040 o update the Red Hat .dev files to work on other distros
3041 o add dbus.dev, pam_console.dev and selinux.dev files for /etc/dev.d/default/ usage
3042 o add hints for red hat users from Leann Ogasawara <ogasawara@osdl.org>
3043 o add scripts to run gcov for udev from Leann Ogasawara <ogasawara@osdl.org>
3044 o change permissions on udevd test scripts
3045 o Fix build process for users who have LC_ALL set to a non-english language
3046 o Added expanded tests to the test framework from Leann Ogasawara <ogasawara@osdl.org>
3047 o added execelent "writing udev rules" document from Daniel Drake <dan@reactivated.net>
3048 o added rule to put USB printers in their proper places
3049 o added rules for CAPI devices
3050 o added a dev.d alsa script to help people out
3053 o fix test regressions
3054 o udev_selinux changes
3057 o fix devpath for netdev
3063 Summary of changes from v023 to v024
3064 ============================================
3066 <atul.sabharwal:intel.com>:
3067 o Add README for chassis_id
3068 o Add chassis_id program to extras directory
3070 <chris_friesen:sympatico.ca>:
3071 o udevd race conditions and performance, assorted cleanups
3074 o fix SEGV in libsysfs/dlist.c
3076 <maryedie:osdl.org>:
3077 o add OSDL documentation for persistent naming
3080 o small ide-devfs.sh fix
3083 o remove compiler warning from udevd.c
3084 o only generate udev.8 on the fly, not all other man pages
3085 o update bk ignore list some more
3086 o update bk ignore list
3087 o switch to generate the man pages during the normal build, not during the install
3088 o convert udev.8.in to use @udevdir@ macro for make install
3089 o first step of making man pages dynamically generated
3090 o add install and uninstall the etc/dev.d/net/hotplug.dev file to the Makefile
3091 o tweak net_test a bit
3092 o fix some segfaults when running udevtest for network devices
3093 o make a net_test test script using udevtest
3094 o handle the subsytem if provided in udevtest
3095 o add hotplug.dev script to handle renamed network devices
3096 o add a bunch of network class devices to the test sysfs tree
3097 o add udevruler to the bk ignore list
3098 o update RFC-dev.d docs due to DEVNODE to DEVNAME change
3099 o clean up chassis_id coding style
3100 o clean up the OSDL document formatting a bit
3101 o add netlink rules to devfs and gentoo rules files
3102 o added USB device rules to rules files
3103 o clean up the gentoo rules file a bit more, adding dri rules
3104 o fix up udev.rules to handle oss rules better
3106 o fix udev.spec file for where udevtest should be placed
3109 o tweak node unlink handling
3110 o switch udevd's msg_dump() to #define
3111 o handle netdev in udevruler
3113 o put config info in db for netdev
3114 o increase udevd event timeout
3116 o put netdev handling and dev.d/ in manpages
3117 o DEVPATH for netdev
3118 o netdev - udevdb+dev.d changes
3119 o udevd race conditions and performance, assorted cleanups - take 2
3121 o dev_d.c file sorting and cleanup
3122 o apply all_partitions rule to main block device only
3125 Summary of changes from v022 to v023
3126 ============================================
3129 o hmm, handle net devices with udev?
3130 o correct apply_format() for symlink only rules
3131 o don't init namedev on remove
3132 o first stupid try for a rule compose gui
3133 o replace fgets() with mmap() and introduce udev_lib.[hc]
3134 o make udevtest a real program :)
3136 Daniel E. F. Stekloff:
3140 o create the /etc/dev.d/ directories in 'make install'
3141 o actually have udev run files ending in .dev in the /etc/dev.d/ directory as documented
3142 o added RFC-dev.d document detailing how /etc/dev.d/ works
3143 o fixed up udev.spec to handle selinux stuff properly now
3144 o remove USE_DBUS and USE_SELINUX flags from the README as they are no longer present
3145 o remove selinux stuff from the main Makefile
3146 o move udev_selinux into extras/selinux
3147 o fix dbus build in the udev.spec file
3148 o remove dbus stuff from main Makefile
3149 o move udev_dbus to extras/dbus
3150 o udev_dbus can now compile properly, but linnking is another story
3151 o remove udev_dbus.h from Makefile
3152 o first cut at standalone udev_selinux program
3153 o remove selinux support from udev core as it's no longer needed
3154 o first cut at standalone udev_dbus program
3155 o add get_devnode() helper to udev_lib for udev_dbus program
3156 o remove dbus code from core udev code as it's no longer needed to be there
3157 o add /etc/dev.d/ support for udev add and remove events
3158 o fix build error in namedev.c caused by previous patch
3160 o fix 'make spotless' to really do that in klibc
3161 o add a question/answer about automounting usb devices to the FAQ
3162 o mark scsi-devfs.sh as executable
3163 o Increase the name size as requested by Richard Gooch <rgooch@ras.ucalgary.ca>
3164 o fix udevtest to build properly after the big udev_lib change
3167 o uninitialized variable for mknod and friend
3170 o SCSI logical and physical names for udev
3173 o Trivial man page typo fixes to udev
3176 Summary of changes from v021 to v022
3177 ============================================
3179 <ananth:in.ibm.com>:
3180 o more Libsysfs updates
3183 <async:cc.gatech.edu>:
3184 o fix HOWTO-udev_for_dev for udevdir
3187 o udev-test.pl cleanup
3188 o add dev node test to udev-test.pl
3189 o add permission tests
3190 o "symlink only" test
3191 o callout part selector tweak
3192 o cleanup callout fork
3193 o allow to specify node permissions in the rule
3195 o put symlink only rules to the man page
3196 o rename strn*() macros to strmax
3197 o conditional remove of trailing sysfs whitespace
3198 o clarify udevinfo text
3199 o better fix for NAME="foo-%c{N}" gets a truncated name
3200 o overall trivial trivial cleanup
3201 o fix NAME="foo-%c{N}" gets a truncated name
3202 o cleanup mult field string handling
3205 o fix a type in docs/libsysfs.txt
3206 o Added line to udev.permissions.redhat
3207 o Include more examples in the docs area for gentoo and redhat
3213 o add big major tests to udev-test.pl
3214 o add a test for a minor over 255
3215 o udev-test.pl: print out major:minor and perm test "ok" if is ok
3216 o make perm and major:minor test errors be reported properly
3217 o remove extra ; in namedev_parse.c
3218 o Added multipath-tools 0.1.1 release
3219 o deleted current extras/multipath directory
3221 o fix the build for older versions of gcc
3224 o Small fix to remove extra "will" in man page
3228 o udev* segfaults with new klibc
3231 o add tests for NAME="foo-%c{N}"
3233 Summary of changes from v020 to v021
3234 ============================================
3237 o install udevinfo in /usr/bin
3238 o blacklist pcmcia_socket
3241 o fix udev.spec to find udevinfo now that it has moved to /usr/bin
3242 o Fix another problem with Makefile installing initscript
3243 o fix the Makefile to install the init script into the proper directory
3244 o make spec file turn off selinux support by default
3247 Summary of changes from v019 to v020
3248 ============================================
3250 <christophe.varoqui:free.fr>:
3254 o man page udevstart
3256 o bugfix for local user
3259 o clarify udevinfo device walk
3260 o udevinfo symlink reverse query
3261 o fix stroul endptr use
3262 o add $local user spport for permissions
3263 o udev - man page update
3264 o udev - fix debug info for multiple rule file config
3265 o udev - kill udevd on install
3266 o udev - activate formt length attribute
3267 o udev - safer sprintf() use
3270 o no error on enoent
3271 o escape dashes in man pages
3272 o remove usage of expr in ide-devfs.sh
3275 o automatically install correct initscript
3276 o update documetation for $local
3279 o Add symlink only rules support
3282 o update the TODO list as we already have a devfs config file
3283 o make start_udev use udevstart binary
3285 o Remove Debian permission files as the Debian maintainer doesn't seem to want to share :(
3286 o update the Gentoo rules files
3287 o Add Red Hat rules and permissions files
3288 o add udevstart to the ignore list
3289 o add udevstart program based on a old patch from Harald Hoyer <harald@redhat.com>
3290 o unlink the file before we try to create it
3291 o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev
3294 Summary of changes from v018 to v019
3295 ============================================
3299 o udev - correct relative symlink
3300 o udev - safer string handling - part four
3301 o udev - safer string handling - part three
3302 o udev - safer string handling - part two
3303 o udev - man page update
3304 o udev - safer string handling all over the place
3306 o udev - allow all files in a directory as the config
3307 o udev - simple klibc textual uid/gid handling
3310 o do not remove real .udev.tdb during RPM build
3313 o add new TODO item about local user permissions
3314 o Add initial SELinux support for udev
3315 o fix build for very old versions of make
3316 o remove limit of the number of args passed to PROGRAM
3317 o force udev to include the internal version of libsysfs and never the external one
3318 o fix up libsysfs header file usage to fix bug reports from users that have sysfsutils installed already
3319 o remove udevtest on 'make clean'
3320 o remove udevd priority TODO item, as it's not needed at all
3323 o update udev scsi_id to scsi_id 0.4
3326 Summary of changes from v017 to v018
3327 ============================================
3329 <ext.devoteam.varoqui:sncf.fr>:
3330 o [PATCH] symlink dm-[0-9]* rule
3331 o update extras/multipath
3333 <john-hotplug:fjellstad.org>:
3334 o init.d debian patch
3337 o udev - TODO update
3338 o udev - add %s{filename} to man page
3339 o udev - udevd/udevsend man page
3340 o udev - switch callout part selector to {attribute}
3341 o udev - switch SYSFS_file to SYSFS{file}
3342 o udev - create all partitions of blockdevice
3344 o Adding '%s' format specifier to NAME and SYMLINK
3347 o added some scsi_id files to the bk ignore file
3348 o added scsi_id and some more documentation to the udev.spec file
3349 o update udev.rules.gentoo with new config file format
3350 o Update the Gentoo udev.rules and udev.permissions files
3351 o Create a udev.rules.examples file to hold odd udev.rules
3352 o add udevd priority issue to the TODO list
3353 o more HOWTO cleanups
3354 o add HOWTO detailing how to use udev to manage /dev
3355 o mv libsysfs/libsysfs.h to libsysfs/sysfs/libsysfs.h to make it easier to use
3356 o add start_udev init script
3357 o add support for UDEV_NO_SLEEP env variable so Gentoo people will be happy
3358 o start up udevd ourselves in the init script to give it some good priorities
3359 o update the red hat init script to handle nodes that are not present
3360 o add a "old style" SYSFS_attribute test to udev-test.pl
3361 o Have udevsend report more info in debug mode
3362 o Have udevd report it's version in debug mode
3363 o fix up bug created for udevtest in previous partition creation patch
3364 o update the udev.spec to add udevtest and make some more Red Hat suggested changes
3365 o add ability to install udevtest to Makefile
3367 o Add another test to udev-test.pl and fix a bug when only running 1 test
3368 o Fix bug where we did not use the "converted" kernel name if we had no rule
3371 o udev use new libsysfs header file location
3372 o udev add some ID tests
3375 Summary of changes from v016 to v017
3376 ============================================
3378 <azarah:nosferatu.za.org>:
3379 o make logging a config option
3381 <christophe.varoqui:free.fr>:
3382 o more udev-016/extras/multipath
3383 o more udev-016/extras/multipath
3384 o update extras/multipath
3387 o udev - keep private data out of the database?
3388 o better credential patch
3389 o udevd - client access authorization
3390 o compile udevd with klibc
3391 o udev - fix "ignore method"
3392 o udev - fix cdrom symlink rule
3393 o convert udevsend/udevd to DGRAM and single-threaded
3394 o udevd - kill the lockfile
3395 o udevd - fix socket path length
3396 o udevd - switch socket path to abstract namespace
3397 o udevd - allow to bypass sequence number
3398 o include used function
3401 o add udev_log to the documentation
3402 o fix offsetof() define in klibc
3403 o add some .spec file changes from Red Hat
3404 o update the init.d udev script based on a patch from Red Hat
3405 o remove the .udev.tdb when installing or uninstalling to be safe
3406 o remove the database at startup
3407 o fix bug in permission handling
3408 o update klibc to version .107
3409 o update the bitkeeper ignore file list
3410 o add udevtest program to build
3411 o fix problem where usb devices can be either the main device or the interface
3412 o more logging.h cleanups to be a bit more flexible
3413 o stop using mode_t as different libcs define it in different ways :(
3414 o remove some more KLIBC fixups that are no longer needed
3415 o let udev-test.pl run an individual test if you ask it to
3416 o Handle the '!' character that some block devices have
3417 o add a block device with a ! in the name, and a test for this
3418 o fix up 'make release' to use bk to build the export tree
3419 o fix log option code so that it actually works for all udev programs
3420 o finish syncing up with klibc
3421 o sync with latest version of klibc (0.107)
3422 o fix up Makefile dependancies for udev_version.h
3425 o udev add wild card compare for ID
3426 o udev kill extra bus_id compares in match_id
3429 Summary of changes from v015 to v016
3430 ============================================
3432 <elkropac:students.zcu.cz>:
3433 o get_dev_number() in extras/ide-devfs.sh
3436 o FAQ udev.rules.devfs
3439 o add udevd and udevsend to the spec file
3440 o make /etc/hotplug.d/default/udev.hotplug symlink point to udevsend now
3441 o add KERNEL_DIR option so that the distros will be happy
3442 o make udevsend binary even smaller
3443 o udevsend now almost compiles with klibc, struct sockaddr_un is only problem now
3444 o fix up logging code so that it can be built without it being enabled
3445 o rework the logging code so that each program logs with the proper name in the syslog
3446 o remove logging.c as it's no longer needed
3447 o kill the last examples that contained the %D option
3448 o remove a __KLIBC__ tests in libsysfs, as klibc now supports getpagesize()
3449 o udevd - remove stupid locking error I wrote
3450 o update to klibc version 0.101, fixing the stdin bug
3451 o fix Makefile typo for USE_LSB install
3452 o allow dbus code to actually build again
3455 o let udevsend build with klibc
3456 o udevd - config cleanup
3457 o udevd - cleanup and better timeout handling
3458 o fix possible buffer overflow
3459 o udevd - next round of fixes
3460 o udevinfo - missing options for man page
3461 o udev - trivial style cleanup
3464 Summary of changes from v014 to v015
3465 ============================================
3467 <mbuesch:freenet.de>:
3468 o LFS init script update
3471 o update klibc to version 0.98
3472 o clean up udevinfo on 'make clean'
3473 o add udevinfo man page to spec file
3474 o remove command line documentation from udev man page
3475 o create initial version of udevinfo man page
3476 o added URL to spec file
3477 o add udevinfo to udev.spec file
3478 o add udevinfo to install target of Makefile
3479 o rip out command line code from udev, now that we have udevinfo
3480 o udevinfo doesn't need to declare main_envp
3481 o move get_pair to udev_config.c because udevinfo doesn't need all of namedev.o
3482 o more makefile cleanups
3483 o move udevinfo into the main build and clean up the main Makefile a bit
3484 o clean up compiler warnings if building using klibc
3485 o make udevd only have one instance running at a time
3486 o new testd.block script for debugging
3487 o udevsnd : clean up message creation logic a bit
3488 o make bk ignore udevd and udevsend binaries
3489 o whitespace cleanups
3490 o remove TODO item about BUS value, as it is now done
3491 o add support for figuring out which device on the sysfs "chain" the rule applies to
3494 o udevinfo - now a real program :)
3495 o udevd - cleanup and better timeout handling
3496 o udev - next round of udev event order daemon
3498 o udev - udevinfo with device chain walk
3499 o spilt udev into pieces
3502 Summary of changes from v013 to v014
3503 ============================================
3505 <ananthmg:rediffmail.com>:
3506 o libsysfs update for refresh + namedev.c changes
3508 <christophe.varoqui:free.fr>:
3509 o udev-013/extras/multipath update
3511 <flamingice:sourmilk.net>:
3512 o minor patch for devfs rules
3515 o udev - program to query all device attributes to build a rule
3516 o set default owner/group in db - update
3517 o udev - reverse user query options
3518 o udev - kill %D from udev-test.pl
3519 o add udev logging to info log
3520 o udev - mention format string escape char in man page
3523 o misc code cleanups
3524 o fixup logging.h to handle different logging options properly
3525 o clean up the logging patch a bit to make the option more like the other options
3526 o remove the %D modifier as it is not longer needed
3527 o remove unneeded keyboard rule
3528 o add usb_host and pci_bus to the class blacklist
3529 o added input device rules to udev.rules and udev.rules.devfs
3533 o set default owner/group in db
3534 o small cut n paste error fix
3537 o update udev scsi_id to scsi_id 0.3
3540 Summary of changes from v012 to v013
3541 ============================================
3543 <eike-hotplug:sf-tec.de>:
3544 o LSB init script and other stuff
3546 <elkropac:students.zcu.cz>:
3547 o fix udev directory for Debian init script
3549 <tiggi:infa.abo.fi>:
3550 o udev 012 old gcc fixup
3553 o add IGNORE rule type
3557 o update TODO with some new, small items
3558 o Cset exclude: greg@kroah.com|ChangeSet|20040113010256|48515
3559 o update the README in a few places
3560 o fix -d typo in the manpage update
3561 o Fix stupid gcc "optimization" of 1 character printk() calls.... Ick
3562 o oops, forgot to fix up the PROGRAM result from ID to RESULT in the config files
3563 o Add alsa device rules and a few other devfs rules
3564 o fix a few stale comments in namedev.c
3565 o convert the default rules files to the new format
3566 o convert the test shell scripts to the config file format
3567 o add bus test for usb-serial bus
3568 o Add some helpful messages if the user uses the older config file format
3569 o added dri rule to the default config file
3570 o added init.d udev script for debian
3571 o add a script that tests the IGNORE rule
3572 o add silly script that names cdrom drives based on the cd in them
3573 o add cdrom rule for ide cdrom
3574 o replace list_for_each with list_for_each_entry, saving a few lines of code
3575 o add a blacklist of class devices we do not want to look at
3578 o fix klibc with printf() and gcc
3579 o udev - small script optimization
3580 o udev - introduce format escape char
3581 o udev - more CALLOUT is PROGRAM now
3582 o udev - CALLOUT is PROGRAM now
3583 o update documentation for new config file format
3584 o more advanced user query options
3585 o udev - simple debug tweak
3586 o udev - drop all methods :)
3587 o udev - advanced user query options
3588 o udev - Makefile error
3589 o udev - make exec_callout() reusable
3590 o udev - exec status fix for klibc
3591 o fix Silly udev script
3594 Summary of changes from v011 to v012
3595 ============================================
3597 <azarah:nosferatu.za.org>:
3598 o make symlink work properly if there is already a file in its place
3599 o Fix udev gcc-2.95.4 compat
3601 <christophe.varoqui:free.fr>:
3602 o extras multipath update
3603 o extras multipath update
3606 o mention user callable udev + options in man page
3607 o make udev user callable to query the database
3608 o depend on all .h files
3609 o cleanup namedev_parse debug text
3610 o extend exec_program[]
3611 o ide-devfs.sh update
3612 o fix for apply_format()
3613 o check for empty symlink string
3614 o 'ide' missing in bus_files[]
3615 o small trivial cleanup of latest changes
3617 <mbuesch:freenet.de>:
3618 o introduce signal handler
3621 o udev spec file update
3624 o minor grammer fixes for the udev_vs_devfs document
3625 o move the dbus config file to etc/dbus-1/system.d/
3626 o move the config files to etc/udev to clean up main directory a bit
3627 o add Gentoo versions of the rules and permissions files
3628 o if using glibc, link dynamically, as no one like 500Kb udev binaries
3629 o minor change to udev_vs_devfs document
3630 o added udev vs devfs supid document to the tree
3631 o move the signal handling registration to after we have initialized enough stuff
3632 o make ide-devfs.sh executable in the tree
3633 o udev.permissions.debian - forgot the dm nodes
3634 o update the udev.permissions.debian file with new entries
3635 o added udev.init script for the Linux From Scratch project
3639 Summary of changes from v010 to v011
3640 ============================================
3642 <mbuesch:freenet.de>:
3643 o proper cleanup on udevdb_init() failure
3646 o patch udev 009-010 rpm spec file
3649 o fix udev sed Makefile usage
3652 o add documentation about the BUS key being optional for the LABEL rule
3653 o add tests for LABEL rule with a device that has no bus
3654 o Don't require the BUS value for the LABEL rule
3655 o If a LABEL rule has a BUS id, then we must check to see if the device is on a bus
3656 o add documentation about the BUS key being optional for the CALLOUT rule
3657 o If a CALLOUT rule has a BUS id, then we must check to see if the device is on a bus
3658 o Don't require the BUS value for the CALLOUT rule
3659 o add test for callout rule with a device that has no bus
3661 o added different build options to the rpm udev.spec file
3662 o add pci to the bus_files list
3663 o check for empty line a bit better in the parser
3664 o more init script cleanups, the stop target now calls udev to cleanup instead of just removing the whole /udev directory
3665 o make udev init script run udev in the background to let startup go much faster
3666 o fix long delay for all devices in namedev
3669 Summary of changes from v009 to v010
3670 ============================================
3672 <ananth:in.ibm.com>:
3675 <christophe.varoqui:free.fr>:
3676 o extras multipath update
3677 o extras multipath update
3678 o extras multipath update
3679 o extras multipath update
3683 o small cleanup udev-remove.c
3684 o experimental CALLOUT script for devfs ide node creation with cd, disc, part
3685 o add any valid device
3686 o introduce format char 'k' for kernel-name
3687 o trivial make fixes
3688 o don't overwrite old config on install
3689 o udev-remove.c cleanups
3690 o bug in udev-remove.c
3691 o trivial cleanup parser changes
3693 <roman.kagan:itep.ru>:
3694 o fix comment and whitespace handling in config files
3697 o Allow build with empty EXTRAS
3699 Daniel E. F. Stekloff:
3700 o libsysfs 0.4.0 patch
3701 o fix scsi_id segfault with udev-009
3705 o mark config files as such in the rpm spec file
3708 o fix complier warning in namedev.c
3709 o add documentation for the new '%k' modifier (kernel name replacement)
3710 o add documentation about the multiple sysfs values that are now allowed for the LABEL rule
3711 o add tests for multi-file LABEL rules
3712 o add ability to have up to 5 SYSFS_ file/value pairs for the LABEL rule
3713 o Just live with a sleep(1) in namedev for now until libsysfs is fixed up
3714 o try to wait until the proper device file shows up in sysfs
3715 o remove unneeded TODO and FIXME entry
3716 o clean up the stand-alone tests to work properly on other people's machines
3717 o add tests to catch whitespace and comment config file parsing errors
3720 Summary of changes from v008 to v009
3721 ============================================
3723 <christophe.varoqui:free.fr>:
3724 o more extras/multipath changes
3725 o and more extras/multipath updates
3726 o more extras/multipath updates
3727 o yet more extras/multipath
3728 o more extras/multipath updates
3729 o extras/multipath update
3732 o D-BUS patch for udev-008
3734 <eike-hotplug:sf-tec.de>:
3735 o add init.d/udev to "make install"
3736 o add init.d/udev to the spec file
3739 o don't rely on field order in namedev_parse
3740 o get part of callout return string
3741 o remove '\n' from end of callout return
3742 o man-page mention multiple symlinks
3743 o allow multiple symlinks
3744 o cleanup man & remove symlink comment
3745 o experimental (very simple) SYMLINK creation
3747 o pattern match for label method
3748 o a bug in linefeed removal
3751 o remove udev from runlevels on uninstall
3752 o install initscript in udev rpm
3754 Daniel E. F. Stekloff:
3755 o pre-libsysfs-0.4.0 patch
3758 o signal fixes due to klibc update
3759 o sync klibc with release 0.95
3760 o add mol permissions to the debian permissions file
3761 o update the FAQ with info about bad modprobe events from the devfs scheme
3762 o some cleanups due to the need for LABEL rules to use "SYSFS_" now
3763 o Add restart target to the etc/init.d/udev script
3764 o tweak the config file generation portion of the Makefile a bit
3765 o change devfs disk name rule from 'disk' to 'disc'
3766 o add vc support to udev.rules.devfs
3767 o added a devfs udev config file from Marco d'Itri <md@Linux.IT>
3768 o set default mode to 0600 to be safer
3769 o Makefile tweaks for the DBUS build
3770 o update the FAQ due to the latest devfs mess on lkml and also due to symlinks now working
3771 o document the different Makefile config options that we have
3772 o change USE_DBUS to DBUS in Makefile, and disable it by default as it's still to hard to build on all systems
3773 o fix formatting of udev_dbus.c to use tabs. Also get it to build properly now
3774 o move all of the DBUS logic into one file and remove all of the #ifdef crud from the main code
3777 o dump latest klibc into the udev build tree
3778 o use udevdir in udev.conf
3781 o better allow builds of extras programs under udev
3782 o update udev extras/scsi_id to version 0.2
3785 Summary of changes from v007 to v008
3786 ============================================
3788 <azarah:nosferatu.za.org>:
3789 o more config file parsing robustness
3791 <christophe.varoqui:free.fr>:
3792 o udev-007/extras/multipath update
3795 o Build failure - missing linux/limits.h include?
3796 o Add format modifier for devfs like naming
3797 o klibc makefile fixes
3799 Daniel E. F. Stekloff:
3800 o another patch for path problem
3801 o quick fix for libsysfs bus
3802 o libsysfs changes for sysfsutils 0.3.0
3805 o fix up some duplicated function compiler warnings in libsysfs
3806 o fix some compiler warnings in the tdb code
3807 o Added Kay's name to the man page
3808 o update the wildcard documentation in the man page to show the new styles supported
3809 o fix permission handling logic
3810 o enable default_mode ability to actually build
3811 o add support for the default_mode variable, as it is documented
3812 o show permissions and groups in the label_test
3813 o remove some items off of the TODO list, as they are now done
3814 o fix up the tests to work without all of the environ variables
3815 o get rid of the majority of the debug environment variables
3816 o Update the man page to show the new config file, it's format, and how to use it
3817 o fix up the tests to support the rules file name change
3818 o add support for a main udev config file, udev.conf
3819 o turn debugging messages off by default
3820 o split out the namedev config parsing logic to namedev_parse.c
3821 o rename namedev's get_attr() to be main namedev_name_device() as that's what it really is
3822 o add devfs like tty rules as an example in the default config file
3823 o operate on the rules in the order they are in the config file (within the rule type) instead of operating on them backwards.
3824 o Cset exclude: dsteklof@us.ibm.com|ChangeSet|20031126173159|56255
3825 o add test for checking the BUS value
3826 o fix problem where we were not looking at the BUS value
3827 o add scsi and pci bus links in the test sysfs tree
3828 o add test and documentation for new %D devfs format modifier
3829 o changed the default location of the database to /udev/.udev.tdb to be LSB compliant
3830 o get rid of functions in klibc_fixups that are now in klibc
3831 o sync up with the 0.84 version of klibc
3832 o fix udev init.d script to handle all class devices in sysfs
3833 o fix the test.block and test.tty scripts due to their moveing. Also add a test.all script
3834 o 007_bk version change to Makefile
3837 o pattern matching for namedev
3838 o catch replace device by wildcard
3839 o udev.8 tweak numeric id text
3840 o udev-test.pl add subdir test
3841 o namedev.c strcat tweak
3842 o overall whitespace + debug text conditioning
3843 o udev-test.pl - tweaks
3846 o Add -nodefaultlibs while compiling against klibc
3849 o ARCH detection for ppc
3852 o fix udev parallel builds with klibc
3855 Summary of changes from v006 to v007
3856 ============================================
3859 o fix segfault in parsing bad udev.permissions file
3862 o update default config file with a CALLOUT rule, and more documentation
3863 o updated the man page with the latest format specifier changes
3864 o added ability to put format specifiers in the CALLOUT program string
3865 o tweak udev-test.pl to report '0' errors if that's what happened
3866 o only build klibc_fixups.c if we are actually using klibc
3867 o add support for string group and string user names in udev.permissions
3868 o add getgrnam and getpwnam to klibc_fixups files
3869 o remove Makefile.klibc
3870 o add udev-test perl script from Kay Sievers <kay.sievers@vrfy.org> which blows away my puny shell scripts
3871 o added debian's version of udev.permissions
3872 o change to 006_bk version
3875 o format char for CALLOUT output
3876 o more namedev whitespace cleanups
3877 o support arguments in callout exec
3878 o namedev.c - change order of fields in CALLOUT
3879 o namedev.c whitespace + debug text cleanup
3880 o man page with udev.permissions wildcard
3883 o static klibc udev does not link against crt0.o
3885 Summary of changes from v005 to v006
3886 ============================================
3888 <chris_friesen:sympatico.ca>:
3889 o faster test scripts
3892 o more robust config file parsing in namedev.c
3893 o add bus id modifier
3895 Daniel E. F. Stekloff:
3896 o patch for libsysfs sysfs directory handling
3899 o add another line to udev.permissions in the proper format
3900 o tweak replace_test
3901 o fix permissions to work properly now
3902 o add real udev.permissions file to test directory
3903 o fix namedev.c to build with older version of gcc
3904 o add dumb test for all of the different modifiers
3905 o update the TODO list with more items that people can easily do
3906 o move the test.block and test.tty scripts to the test/ directory
3907 o add remove actions to the test scripts
3908 o turn DEBUG_PARSER off by default
3909 o add some documentation for the %b modifier to the default config file
3910 o fix make install rule for when the udev symlink is already there
3911 o change release target in makefile
3912 o change debug level on printf values for now
3913 o updated demo config file
3914 o add some documentation of the modifiers to the default config file
3915 o add demo config file
3916 o updated bk ignore list for klibc generated files
3917 o add printf option to label test to verify it works
3918 o fix up printf-like functionality due to previous changes
3919 o get the major/minor number before we name the device
3920 o add scsi_id "extra" program from Patrick Mansfield <patmans@us.ibm.com>
3921 o Add multipath "extra" program from Christophe Varoqui, <christophe.varoqui@free.fr>
3922 o trailing whitespace cleanups
3923 o splig LABEL and NUMBER into separate functions
3924 o add TOPO regression test
3925 o move TOPOLOGY rule to it's own function
3926 o fix bug where NUMBER and TOPOLOGY would not work for partitions
3927 o clean up the way we find the sysdevice for a block device for namedev
3928 o updated label test script (tests for partitions now.)
3929 o split REPLACE and CALLOUT into separate functions
3930 o add debug line for REPLACE call
3932 o add more sysfs test tree files
3933 o change UDEV_SYSFS_PATH environment variable due to libsysfs change
3934 o fix bug in klibc's isspace function
3935 o fix udev-add.c to build properly with older versions of gcc
3936 o add prototype for ftruncate to klibc
3937 o Remove a few items from the TODO list that are already done
3938 o version number to 005_bk
3939 o pull some klibc stuff into the make Makefile to try to stay in sync
3943 o apply permissions.conf support for wildcard and default name
3944 o man page with included placeholder list
3945 o implement printf-like placeholder support for NAME
3946 o more manpage tweaks
3947 o add support for subdirs
3948 o add uid/gid to nodes
3954 o Fixup path for kernel includes when building with klibc
3960 Summary of changes from v004 to v005
3961 ============================================
3964 o namedev.c comments + debug patch
3968 o ignore the klibc/linux symlink
3969 o add klibc linux symlink info to the README
3970 o get 'make release' to work properly again
3971 o added README info for how to build using klibc
3972 o turn off debugging if we are building with klibc
3973 o turn off debugging in namedev
3974 o added vsyslog support to klibc
3975 o add ftruncate to klibc
3976 o klibc specific tweaks
3977 o libsysfs does not need mntent.h in it's header file
3978 o udev build tweaks to tdb's spinlock code
3979 o klibc makefile changes
3980 o build tdb and libsysfs from the same makefile as udev
3981 o udev-add build cleanups for other libc versions
3982 o tweak tdb to build within udev better
3983 o make libsysfs spit debug messages to the same place as the rest of udev
3984 o make libsysfs build cleanly
3985 o updated bk ignore list
3986 o added klibc version 0.82 (cvs tree) to the udev tree
3987 o makefile fix for now
3988 o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev
3989 o hm, makefile bug with so many files... will fix later
3990 o regression tests starting to be added
3991 o fix LABEL bug for device files (not class files.)
3992 o more warning flags to the build
3993 o got rid of struct device_attr
3994 o rename namedev.permissions and namedev.config to udev.permissions and udev.config
3995 o fix dbg line in namedev.c
3996 o more overrides of config info with env variables if in test mode
3997 o Fix bug causing udev to sleep forever waiting for dev file to show up
3998 o change version to 004_bk
3999 o make config files, sysfs root, and udev root configurable from config variables
4002 o udev: sleep_for_dev() bits
4003 o udev: another canidate for static
4006 Summary of changes from v003 to v004
4007 ============================================
4009 Daniel E. F. Stekloff:
4010 o new version of libsysfs patch
4014 o major database cleanups
4015 o Changed test.block and test.tty to take ACTION from the command line
4016 o don't sleep if 'dev' file is already present on device add
4017 o fix comment about how the "dev" file is made up
4018 o more database work. Now we only store the info we really need right now
4019 o add BUS= bug to TODO list so it will not get forgotten
4021 o test.block changes
4022 o ok, rpm likes the "_" character instead of "-" better
4023 o change the version to 003-bk to keep things sane with people using the bk tree
4024 o got "remove of named devices" working
4025 o fix segfaults when dealing with partitions
4032 o udev: mode should be mode_t
4033 o udev: trivial trivialities
4034 o udev: cool test scripts again
4035 o udev spec file symlink support
4036 o udev: cool test scripts
4037 o udev spec file bits
4040 Summary of changes from v0.2 to v003
4041 ============================================
4043 Daniel E. F. Stekloff:
4048 o update the spec file for the new version and install process
4049 o fix makefile release rule to not drop tdb.h file
4051 o removed AUTHORS and INSTALL files as they were pretty pointless
4053 o Add AUTHORS and INSTALL files
4056 o updated the TODO list
4057 o add udev man page (basically just a place holder for now.)
4058 o added uninstall support
4059 o added install target for makefile so people don't have to do it by hand anymore
4060 o add version to debug log on startup
4061 o tell the user what mknod() we are trying to do
4062 o add dbg_parse() to cut down on parse file debugging statements
4063 o put config files and database in /etc/udev by default
4064 o add ols 2003 udev paper to docs/
4065 o clean up some debugging stuff in namedev.c
4066 o do not build the tdb binary programs, only the objects
4067 o merge tdb into the build process
4068 o Added tdb code from latest cvs version in the samba tree
4069 o added my name to the .spec file
4071 o cleanup the mknod code a bit
4072 o remove mknod callout
4073 o handle new major:minor format of dev files that showed up in 2.6.0-test2-bk3 or so
4074 o oops, everything was getting created as 000 mode, try to fix this up, but fail...
4081 o add callout config type to udev
4084 o Fix TDB cross compilation
4086 o udev/libsysfs cross compile fixes
4089 Summary of changes from v0.1 to v0.2
4090 ============================================
4094 o removed unneeded stuff from udev.h
4095 o added 0.2 change log info
4096 o start working on label support, and fix some segfaults for block devices
4097 o test config file changes
4098 o add NUMBER support (basically same logic as TOPOLOGY, perhaps we should
4100 o added topology support
4101 o got REPLACE to work properly
4102 o make struct config_device contain a struct device_attr instead of
4103 duplicating the mess
4105 o split the tests up into different files
4106 o split udev main logic into udev-add and udev-remove
4107 o Clean up the namedev interface a bit, making the code smaller
4108 o bk: update ignore list
4109 o update the tests to handle block devices too
4110 o add initial libsysfs support
4111 o added libsysfs to the build
4112 o added libsysfs code from sysutils-0.1.1-071803 release
4113 o namedev config files are fully parsed
4114 o more permission tests
4115 o make log_message spit out warnings so I don't have to spend forever
4116 chasing down stupid bugs that aren't there...
4117 o added klibc makefile
4118 o Initial namedev parsing of config files
4119 o sleep for 2 seconds to give the kernel a chance to actually create the
4121 o pick a better default UDEV_ROOT
4122 o fix up the test to actually work
4123 o added more documentation in README and TODO files
4126 Summary of changes up to v0.1
4127 ============================================
4130 o added more documentation in README and TODO files
4131 o updated the documentation
4132 o cleaned up the makefile a bit
4134 o restructure code to be able to actually get remove_node() to work
4135 o Creating nodes actually works
4136 o added stupid test script for debugging
4137 o added initial documentation and gpl license
4139 o updated ignore list
4140 o added initial files
4142 o Initial repository create
4143 o BitKeeper file /home/greg/src/udev/udev/ChangeSet