Change default filament diameter to match the specs at which filament is ordered...

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index 73657b841047500069500f0146133b43da3aa8a0..a1fc68eca668bba009703b840e4470ec826bdb30 100644 (file)
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -126,7 +126,7 @@ setting('print_bed_temperature',      70, int,   'basic',    'Speed & Temperatur
 setting('support',                'None', ['None', 'Touching buildplate', 'Everywhere'], 'basic', 'Support').setLabel('Support type', 'Type of support structure build.\n"Touching buildplate" is the most commonly used support setting.\n\nNone does not do any support.\nTouching buildplate only creates support where the support structure will touch the build platform.\nEverywhere creates support even on top of parts of the model.')
 setting('platform_adhesion',      'None', ['None', 'Brim', 'Raft'], 'basic', 'Support').setLabel('Platform adhesion type', 'Different options that help in preventing corners from lifting due to warping.\nBrim adds a single layer thick flat area around your object which is easy to cut off afterwards, and the recommended option.\nRaft adds a thick raster at below the object and a thin interface between this and your object.\n(Note that enabling the brim or raft disables the skirt)')
 setting('support_dual_extrusion',  False, bool, 'basic', 'Support').setLabel('Support dual extrusion', 'Print the support material with the 2nd extruder in a dual extrusion setup. The primary extruder will be used for normal material, while the second extruder is used to print support material.')
-setting('filament_diameter',        2.89, float, 'basic',    'Filament').setRange(1).setLabel('Diameter (mm)', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to calibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
+setting('filament_diameter',        2.85, float, 'basic',    'Filament').setRange(1).setLabel('Diameter (mm)', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to calibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
 setting('filament_diameter2',          0, float, 'basic',    'Filament').setRange(0).setLabel('Diameter2 (mm)', 'Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter as for nozzle 1.')
 setting('filament_diameter3',          0, float, 'basic',    'Filament').setRange(0).setLabel('Diameter3 (mm)', 'Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter as for nozzle 1.')
 setting('filament_diameter4',          0, float, 'basic',    'Filament').setRange(0).setLabel('Diameter4 (mm)', 'Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter as for nozzle 1.')